Wilo-DrainLift SANI CUT-L
Small and lightweight double pump lifting system with macerator for residential buildings.
Small and lightweight double pump lifting system with macerator for residential buildings.
The compact Wilo-DrainLift SANI CUT-L double pump system is a compact and lightweight lifting unit according to EN 12050-1 and is therefore ideal for use in residential and light commercial buildings.
Thanks to its large switching volume and macerator with double shear effect, Wilo-DrainLift SANI CUT-L offers high operational reliability.
With freely selectable inlets and compact physical dimensions, the Wilo-DrainLift SANI CUT-L can be installed flexibly and unobtrusively.
Maintenance is made particularly easy by the user-friendly construction including transparent cover.
Recommended services
Your advantages
- Very easy to install and to transport due to lightweight and space-saving compact construction
- Operational reliability provided by the large switching volume, pump with radial macerator with double shear effect, thermal motor protection and mains-independent alarm
- Optimised hydraulics/macerator combination for a wide coverage of delivery head at the lowest power requirement for domestic electrical installations
- Low overall installation costs thanks to the use of smallest possible piping
- Corrosion-free design with engineering plastics and stainless-steel guarantee high reliability
- Freely selectable connections for maximum installation flexibility
- Transparent tank cover and cleaning opening ensure easy maintenance
Product features
- Tank cover with viewing panel for visual inspection
- Freely selectable inlet surfaces: DN 100 – DN 150
- Motor housing made of corrosion-resistant stainless steel, double sealing
- Optimised hydraulics/macerator combination
- Compact tank with large switching volume
- 50 mm connection for manual drain
- Non-return valve
- Discharge port DN 32/40
Design
Compact, ready for connection, and fully submersible double pump lifting unit with macerator hydraulics for pumping sewage containing faeces.
Application
Pumping of sewage containing faeces:
- In cases where sewage cannot be discharged directly into the sewer system via a natural downward slope
- For backflow resistant drainage in cases where the discharge point is below the backflow level
Equipment/function
- Switchgear with mains-independent alarm and collective fault signal
- Ready-to-plug
- Tank with inspection opening and transparent cover
- Analogue level measurement (4 … 20 mA)
- Non-return valve
- Thermal motor monitoring with bimetallic sensor
Typekey
Example: | DrainLift SANI CUT-L.20T/1 |
DrainLift | Product family |
SANI CUT | Sewage lifting unit with macerator |
L | Size |
20 | Max. delivery head |
T | Mains connection:
|
1 | Motor and switchgear version:
|
Technical data
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Operating mode: S3 10%
- Fluid temperature: 3 ... 40 °C (37 ... 104 °F), max. 65 °C (149 °F) for 5 min
- Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F)
- Tank volume: 64 l (16 US.liq.gal.)
- Max. usable volume in the tank according to the inlet height*: 29 l/7 US.liq.gal. (180 mm*)/39 l/10 US.liq.gal. (250 mm*)/48 l/12 US.liq.gal. (315 mm*)
- Discharge port: DN 32
- Inlet connection: DN 100/150 (110/160 mm)
- Ventilation connection: DN 40 (50 mm)
- Switchgear degree of protection: IP54
- Noise level: 70 dB(A)
Materials
- Motor housing: 1.4404 (AISI 316L)
- Hydraulics: EN-GJL-250 (ASTM A48 Class 35/40B)
- Impeller: EN-GJL-250 (ASTM A48 Class 35/40B)
- Macerator: 1.4528/59 HRC (AISI 440B+Co)
- Tank: PE
- Non-return valve: EN-GJL-250 (ASTM A48 Class 35/40B)
Construction
Gas- and watertight collection tank with sloped floor at an angle and an inspection opening with transparent cover.Freely selectable inlets within the marked areas.Level measurement performed with an analogue output signal 4 ... 20 mA.Discharge port with non-return valve attached.
Surface-cooled (air) or self-cooling (sheath flow cooling) motor with thermal motor monitoring.
Pre-installed switchgear for automatic operation:
Wilo-Control MS-L
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Scope of delivery
- Fully submersible lifting unit with macerator, switchgear, and connection cable including plug
- Pipe connection DN 32 (outer diameter 40 mm)
- HT double socket DN 40 (50 mm) for ventilation connection
- HT double socket DN 40 (50 mm) for drain connection
- Inlet set with hole saw 124 mm (5 in) and seal DN 100 (110 mm)
- Floor fixation set
- Noise insulation mat
- 9 V rechargeable battery
- Installation and operating instructions
Installation and operating instructions
General overview
General Overview 2024 - International version
| Edition | 2024 |
| Number of pages | 74 |
| Language | en |
PDF (33 MB)