FLA-2 MVI 7003/2 PN10 | Wilo

FLA-2 MVI 7003/2 PN10

Technical data
Tender text

Pressure boosting system to be connected indirectly and fully automatic double pump compact unit as homogeneous redundant version of a single-pump system for fire extinguishing applications.

Consisting of:

Two non-self-priming, multi-stage high-pressure multi-stage centrifugal pumps in vertical design. Impellers and stage housing are made of stainless steel.

The complete high-efficiency Helix series is equipped with a user-friendly mechanical seal (X seal) in cartridge design and standard sealing for easy maintenance. The flexible lantern design allows direct access to the mechanical shaft seal. IE2 standard motors, 3-phase, 2-pole.

Diaphragm pressure vessel (capacity 8 l), joint tubing on suction and pressure side for each pump: with non-return valve, shut-off valve on suction and pressure side (sealed in opened state), manometer, pressure switch for automatic system control.

Comes as standard with pump protection by means of minimum volume acceptance via bypass without auxiliary energy.

FLA switchgear for fire extinguishing systems in accordance with DIN 14462. Integrated in a steel sheeting housing.

Homogeneously redundant switchgear version without mutual lock, i.e. two complete autonomous working controls with one power supply each for operation of one pump each. Scope of functions and suitability in accordance with DIN 14462 have been proven by TÜV test report.

Per pump with one control consisting of:

Built-in motor protection only for signalling of faults. The motor protection is activated in test run.

Switch for Manual-Automatic mode Control of the pump by pressure switch in automatic mode; expandable to up to eight sensors (in series connection), for example external on/off limit switch etc. (more than eight sensors on request). All sensor signals which could lead to the pump being started are monitored for wire breakage and short circuits.

System with programmable time switch for regular test run.

Dry-running protection relay, for example, for connection of low water float switch from the WILO FLA break tanks, electrodes, pressure switches etc.; low water status only for signalling of faults. The low water is activated in test run.

With signal lamps for operational readiness (green), pump ON (green), fault (red), pump request (white) as well as potential-free contacts for operational readiness and collective fault (possible as common signal) and pump ON.

Suitable for use in industrial and residential areas in accordance with the basic requirements of guideline 2004/108/EC (EMC guideline).

The system has been mounted on the base frame with wires and pipes are ready for connection.

Operating data
Fluid media
Max. delivery head Hmax
65,1 m
Number of pumps
Fluid temperature T
3 °C
Ambient temperature T
5 °C
Maximum operating pressure PN
10 bar
Maximum inlet pressure p inl
10 bar
Motor data
Mains connection
3~400 V, 50 Hz
Rated power P2
15 kW
Rated current IN
26,7 A
Power factor cos φ
Rated speed n
2900 1/min
Activation type
Star-delta (SD)
Protection class motor
Protection class switchgear
Pump housing
Cast iron
Stainless steel
Stainless steel
Shaft seal
Gasket material
Pipework material
Stainless steel
Installation dimensions
Pipe connection on the suction side DNs
DN 125
Pipe connection on the pressure side DNd
DN 125
Information for order placements
Product description
FLA-2 MVI 7003/2 PN10
Net weight, approx. m
824 kg
Article number

Installation and operating instructions


Article Number 2534409
Edition 2019-08
Page format 209.9 x 297.0 mm
Number of pages 98
PDF (3 MB)

Certificate REACH (Documents)

REACH regulation

Edition 2020-08
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (158 KB)

FLA-2MVI7003/2 PN10

Number of pages
DWG (5 MB)

FLA-2MVI7003/2 PN10

Number of pages
STP (10 MB)

FLA-2MVI7003/2 PN10

DWG (86 KB)

FLA-2MVI7003/2 PN10

Number of pages
DWG (51 KB)

FLA-2MVI7003/2 PN10

Number of pages
DWG (62 KB)