Wilo-Xiro SPI | Wilo
Your advantages
Xiro SPI

Your advantages

  • Long service life due to corrosion-resistant hydraulics made of stainless steel
  • Universally applicable due to a high performance range
  • Easy installation with integrated non-return valve
  • Easy to maintain and repair due to rewindable motors
Series description
Xiro SPI, 50 Hz


Multistage stainless steel submersible pump in tie strap version for vertical and horizontal installation


  • For process water supply from boreholes and rainwater storage tanks
  • For sprinkling and irrigation
  • Lowering of the water level
  • For pumping water without long-fibre and abrasive constituents


  • Multistage hydraulics with radial or semi-axial impellers
  • Integrated non-return valve
  • NEMA coupling for 6“ and 8“ hydraulics
  • Rewindable, three-phase AC motor

Scope of delivery

  • Hydraulics and motor ready assembled
  • 4.3 m connection cable
  • Installation and operating instructions

Type key


Xiro SPI 6.30-11-A1/XI6-9.3-B1


Submersible pump made of sheet stainless steel


Diameter of the hydraulic unit in inches ["]


Rated volume flow at optimum efficiency in m3/h


Number of hydraulic stages


Technical key figures for hydraulics


Motor construction type: prefilled with water-glycol mixture and rewindable


Motor material version: I = Final parts made of stainless steel C = Final parts made of cast iron


Diameter of the motor in inches ["]


Rated motor power P2 in kW


Technical key figures for motor

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3-30 °C
  • Minimum flow rate at motor: 0.2 m/s or 0.5 m/s (depending on performance)
  • Max. sand content: 50 g/m3
  • Max. number of starts: 10 -20/h (depending on performance)
  • Max. immersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 2½ to Rp 6


  • Hydraulic housing: Stainless steel AISI 304L (1.4307)
  • Impellers: Stainless steel AISI 304L (1.4307)
  • Hydraulic shaft: Stainless steel AISI 420 (1.4021)
  • Motor housing: Stainless steel AISI 304 (1.4301)
  • Motor shaft: Stainless steel AISI 304 (1.4301)


Submersible pump for vertical or horizontal installation.


Multistage submersible motor pump with NEMA (6" and 8") or standard connection (10") with radial or semi-axial impellers with sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.


Rewindable three-phase AC motor with PE2/PA-isolated winding and a water-glycol filling for direct startup. Hydraulic connection as NEMA (6" and 8") or standard connection (10"). Sealing of motor shaft with a mechanical seal made of carbon/ceramic material. Self-lubricating motor bearing. Thrust bearing with rockers for absorption of high axial thrust. Negative axial thrust is absorbed by the rotating seal bearing.


The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.


General overview (Documents)

General overview 2021 International version

Edition 2020
Page format 209.9 x 297.0 mm
Number of pages 74
PDF (10 MB)

Certification booklet

Wilo-Xiro SPI/SPC 6''-10'' without motor

Article Number 6084897
Edition 2020-11
Page format 209.9 x 297.0 mm
Number of pages 20
PDF (2 MB)

Certificate REACH (Documents)

REACH regulation

Edition 2020-08
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (158 KB)
Product list
Number of results: 359
4 … 185 kW
Product descriptionMotor diameter ØRated power P2ConnectionArticle number