DrainLift XXL 1080-2/3,9
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 3 bar |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Switching volume V | 440 l |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Rated current IN | 10.5 A |
| Protection class | IP67 |
| Phase | 3 |
| Rated speed n | 1450 1/min |
| Number of poles | 4 |
| Activation type | Star-Delta (YΔ) |
| Max. switching frequency t | 60 1/h |
| Power consumption P1(Q=max.) of selected impeller * number of pumps P1 | 4400 W |
| Operating mode (non-immersed) | S1 |
| Insulation class | F |
| Materials | |
|---|---|
| Pump housing | PUR |
| Impeller | PUR |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | - |
| Pipe connection on the discharge side DNd | DN 100 |
DrainLift XXL 1080
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift XXL 1080-2/3,9 |
| Article number | 2509034 |
| EAN number | 4016322409021 |
| Colour | silver/black |
| Minimum order quantity | 1 |
| Date of sales availability | 2010-01-01 |
| Packaging | |
|---|---|
| Packaging type | Euro pallet |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 1200 mm |
| Length L | 1990 mm |
| Height with packaging | 1040 mm |
| Height H | 880 mm |
| Width with packaging | 800 mm |
| Width W | 1710 mm |
| Gross weight, approx. m | 296 kg |
| Net weight, approx. m | 230 kg |
Ready-for-connection, fully submersible and automatic sewage lifting unit as a double-pump system with automatic duty cycling, standby and peak-load operation. Two separate, upstream, dry-installed submersible sewage pumps in three-phase version with sheath flow cooling, stainless steel housing and thermal motor monitoring. Two gas-tight and water-tight collection reservoirs made from plastic with clearly defined inlet connections and level control with level sensor. Microprocessor-controlled switchgear with
- LEDs for displaying operating status and error messages
- Adjustable follow-up time
- Integrated and mains-dependent alarm
- 1x potential-free contact for connection of a collective fault signal (SSM).
Scope of delivery:
- Sewage lifting unit ready for connection with switchgear
- 1x collar for diaphragm hand pump connection
- 1x inlet connection DN 150
- 1x collar for venting connection DN 70
- 1 x kit for connection of tank and pump
Attention: To install required fittings (e.g. Y-pipe, gate valve and non-return valve), they must be ordered as an accessory!
| Operating Data |
|---|
| Approved field of application | |
|---|---|
| Fluid temperature T | 3 °C |
| Max. fluid temperature, for short periods up to 3 min. T | 60 °C |
| Ambient temperature T | 3 °C |
| Maximum operating pressure PN | 3 bar |
| Max. permissible pressure in the pressure pipe P | 3 bar |
| Product data | |
|---|---|
| Gross volume of the tank V | 800 l |
| Switching volume V | 440 l |
| Operating mode (non-immersed) |
|
| Height H | 880 mm |
| Length L | 1990 mm |
| Width W | 1710 mm |
| Diagonal dimension Diagonal axis | 2623 mm |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 3.9 kW |
| Rated speed n | 1450 1/min |
| Rated current IN | 10.5 A |
| Insulation class | F |
| Protection class motor | IP67 |
| Activation type | Star-Delta (YΔ) |
| Max. switching frequency t | 60 1/h |
| Motor protection | WSK |
| Cable | |
|---|---|
| Mains plug | no |
| Materials | |
|---|---|
| Tank | PE |
| Pump housing | PUR |
| Impeller | PUR |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side | Ø 110 |
| Pipe connection on the discharge side | DN 100 |
| Connection venting | Ø 75 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift XXL 1080-2/3,9 |
| Net weight, approx. m | 230 kg |
| Article number | 2509034 |
Installation and operating instructions
Wilo-DrainLift XXL
| Article Number | 2532170 |
| Edition | 1010 |
| Number of pages | 1 |
| Language | en, hr, mk, sr, uk |
ZIP (22 B)Wilo-DrainLift XXL
| Article Number | 2532170 |
| Edition | 1010 |
| Number of pages | 29 |
| Language | en |
PDF (2 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (327 KB)3D_DWG
DrainLift XXL 1080-2/3,9
| Language | language neutral |
DWG (4 MB)3D_STEP
WILO-DrainLift XXL 1080-2/3,9
| Language | language neutral |
STP (7 MB)2D_DWG_TOP
WILO-DrainLift XXL 1080-2/3,9
| Language | language neutral |
DWG (73 KB)2D_DWG_FRONT
WILO-DrainLift XXL 1080-2/3,9
| Language | language neutral |
DWG (43 KB)2D_DWG_RIGHT
WILO-DrainLift XXL 1080-2/3,9
| Language | language neutral |
DWG (67 KB)Mains-independent alarm signal (3) | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Stationary dry well installation (14) | |||
Y-piece for the DrainLift XXL sewage lifting unit with a collection tank. To connect the two pumps to one discharge line; includes one installation accessories kit. | |||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Flange connector DN 150 | 2511598 | ||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Diaphragm hand pump for manual draining of a collection reservoir. Fixed installation and mobile application possible. The pumped-off fluid must flow directly to the discharge pipe or another collection point. | |||
Lip seal for sealing inlets with a pipe diameter of 160 mm. | |||
DN 200 inlet seal | 2552850 | ||
Lip seal for sealing inlets with a pipe diameter of 225 mm. | |||
Inlet kit for sealing inlets, consisting of:
| |||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Gate valve DN 100, PVC | 2529808 | ||
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network. | |||
Gate valve DN 150, EN-GJL-250 | 2017164 | ||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network. | |||
Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories.
| |||
Shut-off ball cock for switching between 2 circuits:
| |||
Fittings (7) | |||
Shut-off ball cock for switching between 2 circuits:
| |||
Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories.
| |||
Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories.
| |||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Gate valve DN 150, EN-GJL-250 | 2017164 | ||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Gate valve DN 100, PVC | 2529808 | ||
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network. | |||
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network. | |||
Installation/setup (11) | |||
Diaphragm hand pump for manual draining of a collection reservoir. Fixed installation and mobile application possible. The pumped-off fluid must flow directly to the discharge pipe or another collection point. | |||
Lip seal for sealing inlets with a pipe diameter of 40 mm. | |||
DN 40 inlet seal | 6096499 | ||
Lip seal for sealing inlets with a pipe diameter of 50 mm. | |||
DN 100 inlet seal | 2522672 | ||
Lip seal for sealing inlets with a pipe diameter of 110 mm. | |||
DN 150 inlet seal | 2552849 | ||
Lip seal for sealing inlets with a pipe diameter of 160 mm. | |||
DN 200 inlet seal | 2552850 | ||
Lip seal for sealing inlets with a pipe diameter of 225 mm. | |||
DN 32 inlet seal kit | 6096492 | ||
Inlet kit for sealing inlets, consisting of:
| |||
DN 40 inlet seal kit | 6096493 | ||
Inlet kit for sealing inlets, consisting of:
| |||
DN 100 inlet seal kit | 2521841 | ||
Inlet kit for sealing inlets, consisting of:
| |||
DN 150 inlet seal kit | 2515145 | ||
Inlet kit for sealing inlets, consisting of:
| |||
Inlet kit for sealing inlets, consisting of:
| |||
Pipes/pipe joints (4) | |||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Flange connector DN 100 | 2511597 | ||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Y-piece for the DrainLift XXL sewage lifting unit with a collection tank. To connect the two pumps to one discharge line; includes one installation accessories kit. | |||
Alarm signal (8) | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Alarm switchgear for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Flash light 24 VDC | 2551612 | ||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Level control (9) | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 10 m cable | 503211893 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 20 m cable | 2004431 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 30 m cable | 2004432 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 5 m cable | 6082806 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 10 m cable | 6082807 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 (PSN-X) with 20 m cable | 6088843 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
Float switch WA65 (PSN-X) with 10 m cable | 6088844 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
 Maintenance | Maintenance BASIC DrainLift XXL | 2219543 | |
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance COMFORT DrainLift XXL | 2219517 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance PREMIUM DrainLift XXL | 2219570 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
 Commissioning | Commissioning DrainLift XXL | 2219414 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||
More suitable services | |||
 Service packages | Service Package L DrainLift XXL | 2219722 | |
The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services. The Wilo-Service package L includes:
Optional add-on services:
| |||
Service Package M DrainLift XXL | 2219693 | ||
The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services. The Wilo-Service package M includes:
Optional add-on services:
| |||
Service Package S DrainLift XXL | 2219664 | ||
The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services. The Wilo-Service package S includes:
Optional add-on services:
| |||
 Extended Warranty | Extended Warranty DrainLift XXL | 2219468 | |
In combination of a new pump or system Wilo offers an extended warranty of up to five years in combination with commissioning and maintenance by the Wilo Service. Extended warranty includes:
| |||
 Supervision | Supervision DrainLift XXL | 2219351 | |
Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project. Supervision includes:
| |||
 Installation | Installation DrainLift XXL | 2219386 | |
The Wilo service offers installation of our pumps or pumping systems. We offer an end-to-end process from gathering information on site to installing our product in the overall plant. An optimal installation set-up and the interaction of various individual factors lay the foundation for long-term operational safety. Installation includes:
| |||
 System Optimisation | System Optimisation DrainLift XXL | 2219281 | |
The Wilo Service offers proactive system optimisation by optimising settings and doing minor adjustments to ensure operational reliability. System Optimisation includes among others:
| |||
 Energy Solutions | Energy Solutions DrainLift XXL | 2219316 | |
Wilo Service offers a proactive support to point out possible energy savings. Our service creates an overview of all installed assets to show how the energy consumption of pumps or systems can be reduced. We offer targeted consultancy and analysis, including the involvement of subsidies as well as comprehensive support around the changeover to high-efficiency technologies. Wilo-Energy solution includes:
| |||
 Repair | Repair DrainLift XXL | 2219635 | |
Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system. Repair includes:
| |||