Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Jet FWJ 204-EM/3-2 | Wilo
Similar to figure

Jet FWJ 204-EM/3-2

Article number: 4265611
NEW
Technical data
Hydraulic data
Maximum operating pressure PN 6 bar
Discharge port G 1
Min. fluid temperature Tmin 5 °C
Max. fluid temperature Tmax 35 °C
Min. ambient temperature Tmin 3 °C
Max. ambient temperature Tmax 40 °C
Motor data
Mains connection 1~230 V, 50 Hz
Voltage tolerance ±6 %
Shaft power P2(Q=max.) of selected impeller * number of pumps NO VALUE 1000 W
Rated power P2 1 kW
Rated current IN 5.3 A
Rated speed n 2900 1/min
Power factor cos φ100 0.91
Insulation class B
Protection class IP44
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Shaft seal CVPFF
Gasket material NBR
Installation dimensions
Pipe connection on the suction side DNs G 1
Pipe connection on the discharge side DNd G 1

Jet FWJ 204

Product data
Brand Wilo
Product description Jet FWJ 204-EM/3-2
Article number 4265611
EAN number 4062679372587
Colour green/silver
Minimum order quantity 1
Date of sales availability 2024-03-31
Previous model article number 2543631
Previous model designation Jet FWJ 204
Packaging
Packaging type Cardboard box
Packaging property Sales packaging
Pieces per pallet 12
Number per layer 6
Dimension, weight
Length with packaging 480 mm
Length L 456 mm
Height with packaging 490 mm
Height H 402 mm
Width with packaging 280 mm
Width W 222 mm
Gross weight, approx. m 16.1 kg
Net weight, approx. m 13.4 kg
Tender text

Centrifugal pump system with compact design with horizontal suction and vertical pressure port, consisting of: self-priming jet pump incl. support frame. Directly flanged AC motor with built-in thermal motor protection switch and condenser.

Pump control via electronic pressure and flow monitor with built-in low-water protection and non-return valve. All parts that come into contact with the fluid are corrosion-proof. Pump system ready for connection and pre-assembled and wired with 2 m cable and mains plug. It is therefore ideally suited for mobile use in gardens and hobby areas.

Operating Data
Product data
Maximum operating pressure PN 6 bar
Min. fluid temperature Tmin 5 °C
Max. fluid temperature Tmax 35 °C
Max. ambient temperature Tmax 40 °C
Motor data
Mains connection 1~230 V, 50 Hz
Voltage tolerance ±6 %
Power factor cos φ100 0.91
Rated power P2 1 kW
Rated current IN 5.3 A
Rated speed n 2900 1/min
Insulation class B
Protection class IP44
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Shaft seal CVPFF
Gasket material NBR
Installation dimensions
Pipe connection on the suction side DNs G 1
Pipe connection on the discharge side DNd G 1
Ordering information
Brand Wilo
Product description Jet FWJ 204-EM/3-2
Net weight, approx. m 13.4 kg
Article number 4265611
Documents

Installation and operating instructions

Wilo-Jet-WJ

Article Number 2050754
Edition 2017-08
Number of pages 68
Language cs, de, el, en, es, fr, it, nl, ru, tr
PDF (2 MB)

Wilo-HiControl1

Article Number 4196363
Edition 2024-07
Number of pages 88
Language de, el, en, fr, it, nl, ru, tr
PDF (1 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (279 KB)
Accessory

In inlet mode (3)

In suction mode (2)

In suction mode with floating intake (9)

In suction mode with suction hose (4)

Fittings (1)

Hoses / hose joints (7)

Suction filter (4)

Valves/accessories (1)

Wall fixation/installation on a base (1)

Services

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Wilo-Live Assistant
Wilo-Live Assistant Service
    
2216415

The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems!

The Wilo-Live Assistant includes:

  • Interactive live support via video chat
  • Direct contact with an expert
  • Just-in-time solution to ensure maximum operational reliability of your pumps and systems

More suitable services

Service packages
Service Package L FWJ/HiMulti 3-5
    
2219704

The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services.

The Wilo-Service package L includes:

  • Installation check
  • Supervision
  • Commissioning
  • Maintenance
  • Energy Solutions
  • WiloCare Premium
  • Wilo-Live Assistant

Optional add-on services:

  • System Optimisation
  • Repairs
  • Extended Warranty
Service Package M FWJ/HiMulti 3-5
    
2219675

The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services.

The Wilo-Service package M includes:

  • Installation check
  • Supervision
  • Commissioning
  • Maintenance
  • WiloCare Comfort
  • Wilo-Live Assistant

Optional add-on services:

  • System Optimisation
  • Energy Solutions
  • Repairs
  • Extended Warranty
Service Package S FWJ/HiMulti 3-5
    
2219646

The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services.

The Wilo-Service package S includes:

  • Installation check
  • Commissioning
  • Maintenance
  • WiloCare Basic
  • Wilo-Live Assistant

Optional add-on services:

  • System Optimisation
  • Energy Solutions
  • Supervision
  • Repairs
  • Extended Warranty
Supervision
Supervision FWJ/HiMulti 3-5
    
2219328

Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project.

Supervision includes:

  • Regular on-site visits ensure the quality of information and advice
  • Technical consultancy, also available on site
  • Status report with recommendations after the visit
  • Comprehensive support from a Wilo expert
Installation
Installation FWJ/HiMulti 3-5
    
2219363

The Wilo service offers installation of our pumps or pumping systems. We offer an end-to-end process from gathering information on site to installing our product in the overall plant. An optimal installation set-up and the interaction of various individual factors lay the foundation for long-term operational safety.

Installation includes:

  • Professional inspection
  • Provision of components/materials from Wilo and third-party suppliers
  • Installation of pipelines and electronics
  • Test runs
Commissioning
Commissioning FWJ/HiMulti 3-5
    
2219394

For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:

  • Commissioning of system(s) according to checklist
  • Parameterisation and setting of switchgear
  • Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.)
  • Functional check of fitted system(s)
  • Practice-oriented operation instruction
  • Wilo commissioning protocol

The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included.

Maintenance
Maintenance BASIC FWJ/HiMulti 3-5
    
2219534

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance COMFORT FWJ/HiMulti 3-5
    
2219496

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during normal service hours)

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance PREMIUM FWJ/HiMulti 3-5
    
2219549

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Checking the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during and outside normal service hours)
  • Software updates
  • Includes wearing parts

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

System Optimisation
System Optimisation FWJ/HiMulti 3-5
    
2219258

The Wilo Service offers proactive system optimisation by optimising settings and doing minor adjustments to ensure operational reliability. System Optimisation includes among others:

  • Overhaul of pumps/systems to restore full performance
  • Addition of new technologies or functions in older systems to save on capital expenditures (retrofitting)
Energy Solutions
Energy Solutions FWJ/HiMulti 3-5
    
2219293

Wilo Service offers a proactive support to point out possible energy savings. Our service creates an overview of all installed assets to show how the energy consumption of pumps or systems can be reduced. We offer targeted consultancy and analysis, including the involvement of subsidies as well as comprehensive support around the changeover to high-efficiency technologies. Wilo-Energy solution includes:

  • Detailed assessment of the life cycle costs (LCC analysis)
  • Energy audit including information about energy saving potential
  • Proactive recommendation of replacement options
  • Improving the environmental performance of your system
  • Support in the changeover to Wilo high-efficiency pumps
Repair
Repair FWJ/HiMulti 3-5
    
2219617

Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system.

Repair includes:

  • Verification and elimination of error causes by experienced Wilo experts
  • Non-binding estimate for repairs
  • Electric-hydraulic test run to ensure correct data regarding functionality, quality and performance of the pump or system
  • Coating of various pump or system components for an optimised efficiency factor
  • Use of genuine spare parts only
  • Documentation of the repair in the service report