Wilo-Padus PRO | Wilo

Wilo-Padus PRO

The portable submersible pump for reliable and long-term drainage of excavations.

Your advantages
Wilo-Padus PRO

The portable submersible pump for reliable and long-term drainage of excavations.

The Wilo-Padus PRO is the ideal submersible drainage pump for the drainage of excavations. Thanks to its robust construction, the wear-resistant material combinations and passive cooling in slurping operation, the submersible drainage pump with IE3 motor and integrated protection function is especially suitable for continuous duty in abrasive fluids. It can be used flexibly thanks to its low weight and flexible pressure connection. Quick access to the most important components also simplifies commissioning and maintenance. The Wilo-Padus PRO also fulfils all digitalisation requirements for the optimal planning of future maintenance work.


Your advantages

  • High reliability in abrasive fluids thanks to rubber-coated hydraulics and an impeller made of Duplex chrome steel
  • Easy installation thanks to low weight and flexible pressure connection (vertical/horizontal)
  • Active cooling for reliable continuous operation
  • Continuous duty in slurping operation thanks to passive cooling
  • Easy maintenance thanks to quick access to wearing parts
  • Equipped with energy-efficient IE3 motor technology as standard
  • Highest operational reliability thanks to integrated protection function
Series description
Wilo-Padus PRO

Design

Submersible drainage pump

Application

Pumping of

  • Wastewater
  • Process water

Equipment/function

  • IE3 motor
  • A version with float switch and motor protection plug
  • Sheath current cooling

Typekey

Example:

Wilo-Padus PRO M08L/T039-540/A

Padus

Submersible drainage pump

PRO

Series for construction site use

M

Open multi-channel impeller

08

Nominal diameter of the pressure connection: G3

L

Low-pressure version

T

Mains connection version:

M = 1~

T = 3~

039

Value/10 = motor power P2 in kW

5

Frequency (5 = 50 Hz, 6 = 60 Hz)

40

Rated voltage code

A

Additional electrical equipment:

No supplement = With bare cable end

P = with plug

A = with float switch and motor protection plug

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Protection class: IP68
  • Max. immersion depth: 20 m
  • Fluid temperature: 3 … 40 °C
  • Cable length: 23 m
  • Pressure port: Size B Storz coupling

Materials

  • Motor housing: EN-AC-AlSi10Mg
  • Cooling shroud: 1.4404
  • Pump housing: EN-AC-AlSi10Mg + NBR-70
  • Impeller: 1.4470
  • Suction strainer: 1.4404
  • Shaft: 1.4404
  • Seal:
    • On motor side: SiC/SiC
    • Fluid side: SiC/SiC
  • Static gaskets: NBR

Construction

Submersible drainage pump as submersible monobloc unit for portable wet well installation.

Hydraulics

The outlet on the pressure side is designed as vertical threaded connection with Storz coupling. If necessary, the outlet on the pressure side can be aligned horizontally. Semi-open, multi-channel impellers are used in the process. The inlet has been equipped with a suction strainer. Consequently, coarse elements in the fluid are filtered upstream of the suction port.

Motor

AC and three-phase current version IE3 motors are used in the process. Motors feature thermal motor monitoring. The motor is cooled by the sheath flow cooling. Continuous duty is possible when immersed/non-immersed, also in slurping operation.

A sealing chamber protects the motor from fluid ingress. The filling fluid used is potentially biodegradable and environmentally safe.

The connection cable is permanently connected and the cable is 23 m long:

  • O-version: Cable with bare ends
  • A-version: Cable with float switch and plug
  • P-version: Cable with plug

Seal

The sealing on the fluid side and on the motor side is performed by two bidirectional mechanical seals.

Delivery state

  • Pump with bare cable end
  • Pump with float switch and motor protection plug (A version)
  • Pressure port with Storz pipe coupling
  • Installation and operating instructions
Downloads

Installation and operating instructions

Wilo-Padus PRO

Article Number 6084247
Edition 2019-10
Page format 209.9 x 297.0 mm
Number of pages 32
PDF (2 MB)

General overview (Documents)

General overview 2019 International version

Article Number 2200591
Edition 2018
Page format 209.9 x 297.0 mm
Number of pages 74
PDF (40 MB)

General overview 2021 International version

Edition 2020
Page format 209.9 x 297.0 mm
Number of pages 74
PDF (10 MB)

Certification booklet

Wilo-Padus PRO

Article Number 6053756
Edition 2020-06
Page format 209.9 x 297.0 mm
Number of pages 12
PDF (2 MB)

Brochure (Documents)

Wilo-Padus PRO - Reliable drainage of excavations

Page format 209.9 x 297.0 mm
Number of pages 6
PDF (839 KB)

Certificate REACH (Documents)

REACH regulation

Edition 2021-10
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (162 KB)
Product list
Number of results: 26
Product descriptionPipe connection on the discharge side DNdRated power P2Connection cable lengthMains connectionArticle number
Padus PRO M08/T039-540/P
Storz B
3.9 kW
23 m
3~400 V, 50 Hz
6083436
Padus PRO M08/T039-540/A
Storz B
3.9 kW
23 m
3~400 V, 50 Hz
6083437
Padus PRO M08/T060-540/P
Storz B
6 kW
23 m
3~400 V, 50 Hz
6083438
Padus PRO M08/T060-540/A
Storz B
6 kW
23 m
3~400 V, 50 Hz
6083439
Padus PRO M08L/T039-540/P
Storz B
3.9 kW
23 m
3~400 V, 50 Hz
6083440
Padus PRO M08L/T039-540/A
Storz B
3.9 kW
23 m
3~400 V, 50 Hz
6083441
Padus PRO M08L/T060-540/P
Storz B
6 kW
23 m
3~400 V, 50 Hz
6084030
Padus PRO M08L/T060-540/A
Storz B
6 kW
23 m
3~400 V, 50 Hz
6084031
Padus PRO M05/M015-523/P
Storz C
1.5 kW
23 m
1~230 V, 50 Hz
6087510
Padus PRO M05/M015-523/A
Storz C
1.5 kW
23 m
1~230 V, 50 Hz
6087511
Padus PRO M05/T015-540/P
Storz C
1.5 kW
23 m
3~400 V, 50 Hz
6087512
Padus PRO M05/T015-540/A
Storz C
1.5 kW
23 m
3~400 V, 50 Hz
6087513
Padus PRO M05/T025-540/P
Storz C
2.5 kW
23 m
3~400 V, 50 Hz
6087515
Padus PRO M05/T025-540/A
Storz C
2.5 kW
23 m
3~400 V, 50 Hz
6087516
Padus PRO M05/T039-540/P
Storz C
3.9 kW
23 m
3~400 V, 50 Hz
6087933
Padus PRO M05/T039-540/A
Storz C
3.9 kW
23 m
3~400 V, 50 Hz
6087934
Padus PRO M08/T090-540/O
Storz B
9 kW
23 m
3~400 V, 50 Hz
6089779
Padus PRO M08L/T060-540/O
Storz B
6 kW
23 m
3~400 V, 50 Hz
6089780
Padus PRO M08L/T039-540/O
Storz B
3.9 kW
23 m
3~400 V, 50 Hz
6089781
Padus PRO M08/T060-540/O
Storz B
6 kW
23 m
3~400 V, 50 Hz
6089782
Padus PRO M08/T039-540/O
Storz B
3.9 kW
23 m
3~400 V, 50 Hz
6089783
Padus PRO M05/T039-540/O
Storz C
3.9 kW
23 m
3~400 V, 50 Hz
6089784
Padus PRO M05/T025-540/O
Storz C
2.5 kW
23 m
3~400 V, 50 Hz
6089785
Padus PRO M05/T015-540/O
Storz C
1.5 kW
23 m
3~400 V, 50 Hz
6089786
Padus PRO M08/T090-540/A
Storz B
9 kW
23 m
3~400 V, 50 Hz
6089787
Padus PRO M08/T090-540/P
Storz B
9 kW
23 m
3~400 V, 50 Hz
6089788