Sinum Easycontact 1.0
Technical data | |
---|---|
Mains connection | 1~230 V, 50 Hz |
Rated current IN | 0.16 A |
Protection class | IP54 |
For Wilo pumps | Sinum Mono and Double Pump Control Units |
Product data | |
---|---|
Brand | Wilo |
Product description | Sinum Easycontact 1.0 |
Article number | 2198919 |
EAN number | 4048482838366 |
Colour | White |
Minimum order quantity | 1 |
Date of sales availability | 2018-04-09 |
Packaging | |
---|---|
Packaging type | Cardboard box |
Packaging property | Sales packaging |
Pieces per pallet | 1 |
Number per layer | 1 |
Dimension, weight | |
---|---|
Length with packaging | 210 mm |
Length L | 150 mm |
Height with packaging | 100 mm |
Height H | 50 mm |
Width with packaging | 100 mm |
Width W | 100 mm |
Gross weight, approx. m | 1.3 kg |
Net weight, approx. m | 1.3 kg |
Electronic control device to indicate status of operating parameters of the pressure keeping system. Compatible only with a Sinum automat controller and an application-specific transmission protocol.
The data signal transmitted by Sinum controller is reconstructed by the easycontact device and transformed into an optical (LED), digital (relay) output. Different transmission protocols require the viewer to assign the available transmitters (control units) to the appropriate outputs. LEDs arranged in pairs, red, yellow are assigned to one potential-free output each.
Monitoring is provided either with a green LED for displaying a normal operation, or with six red LEDs in order to indicate specific alarms as follow:
• Maximum water level
• Minimum water level
• Maximum Operating pressure
• Minimum Operating pressure
• Motor protection
• Membrane disruption
Additional display of fault messages via RS 485, optical, digital (potential-free, NC, COM, NO).
The indications are equipped with a separated potential-free dry contact (max. 250 V– 5 A), which can be used for connecting to a building management system (BMS). Easycontact has to be connected to the controller unit and the automatic expansion vessel via a protected cable with a maximum length of 200m. Easycontact protected via a fusible T100mA – 250v
Scope of delivery:
• 7 connection cables
• 1 connector A-MP to connect control unit to the vessel
• Supply cable of 6m with plug included connection to the ground
Technical data | |
---|---|
For Wilo pumps | Sinum Mono and Double Pump Control Units |
Phases | 1 |
Rated voltage U | 230 V |
Rated current IN | 0.16 A |
Protection class | IP54 |
Safety class | II |
Item no. | 2198919 |
EAN number | 4048482838366 |
Make | Wilo |
Net weight, approx. | 1.3 kg |