Wilo-Yonos GIGA-N | Wilo

Wilo-Yonos GIGA-N

The standard pump for universal applications and high energy efficiency.

Your advantages
Wilo-Yonos GIGA-N

The standard pump for universal applications and high energy efficiency.

The Wilo-Yonos GIGA-N is a pump with high energy efficiency for use in heating, air conditioning and cooling applications in buildings with high delivery heads that require the movement of large volumes of water.

Your advantages

  • Efficient pump thanks to the use of IE4 motors
  • Cataphoretic coating of all cast components for high resistance to corrosion and long service life
  • Standard dimensions in accordance with EN 733 make the pump universally deployable
  • Easy adjustment and operation with Green Button Technology
  • Easy maintenance thanks to user-friendly spacer coupling in back pull-out design
  • Optional interfaces for connection to building automation using insertable IF modules
Series description
Wilo-Yonos GIGA-N


Electronically controlled, single-stage low-pressure centrifugal pump with axial suction. Mounted on a baseplate with flange connection and automatic power adjustment.


  • The pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems.
  • Applications for irrigation, building services, general industry, power stations, etc.


Single-stage low-pressure centrifugal pump in monobloc design with coupling, coupling guard, motor and baseplate

  • Drive with integrated electronic speed control
  • Mechanical seal

Operating modes

  • Δp-c for constant differential pressure
  • PID-Control
  • Constant speed (n=constant)

Manual operation level

  • Green button and display

Manual functions

  • Differential pressure setpoint setting
  • Setting the speed (manual control mode)
  • Setting the operating mode
  • Setting the pump ON/OFF
  • Configuration of all operating parameters
  • Fault acknowledgement

External control functions

  • "Overriding Off" control input
  • Analogue input 0 – 10 V, 0 – 20 mA for constant speed (DDC) and remote setpoint adjustment
  • Analogue input 2 – 10 V, 4 – 20 mA for constant speed (DDC) and remote setpoint adjustment
  • Analogue input 0 – 10 V for actual value signal from pressure sensor
  • Analogue input 2 – 10 V, 0 – 20 mA, 4 – 20 mA for actual value signal from pressure sensor

Signal and display functions

  • Collective fault signal SSM
  • Collective run signal SBM

Data exchange

  • Infrared interface for wireless data exchange with IR-Monitor/IR-Stick
  • Plug-in position for Wilo IF-Modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation

Safety functions

  • Full motor protection with integrated trip electronics
  • Access disable

Dual pump management (2 x single pump; Y-piece application only)

  • Main/standby operation (automatic fault-actuated switchover)
  • Pump cycling main/standby operation after 24 hours
  • Parallel operation

Scope of delivery

  • Pump
  • Installation and operating instructions
  • Completely mounted pump on baseplate with coupling, coupling guard and electric motor

Type key


Yonos GIGA-N 40/200-15/2 -R1-P5


Product family


Series designation


Standard pump with axial suction


DN for the pressure flange


Impeller nominal diameter [mm]


Rated power P2 [kW]


Number of poles


Version without differential pressure measurement



empty = with spacer coupling

P5 = without spacer coupling (with standard coupling)

Technical data

  • Fluid temperature -20 °C to +140 °C
  • Mains connection
    • 3~440 V -5/±10 %, 50/60 Hz
    • 3~400 V ±10 %, 50/60 Hz
    • 3~380 V -5/±10 %, 50/60 Hz
  • Protection class IP55
  • Nominal diameter DN 32 to DN 150
  • Max. operating pressure 16 bar


  • Pump housing and lantern. Standard: EN-GJL-250
  • Impeller: Standard: EN-GJL-200; others on request
  • Shaft: 1.4021
  • Mechanical seal: AQEGG; other mechanical seals on request


  • Single-stage low-pressure centrifugal pump as baseplate pump with axial suction ports with flanged bearing brackets and axle fastening for flexibly coupled drives
  • Drive with integrated electronic speed control
  • Spacer coupling (sleeve coupling) is standard; this provides the option of leaving the motor in position when dismantling the rotor unit
  • Variant ...-P5 without spacer coupling (at reduced price, see price list)

Installation and operating instructions

Wilo-Yonos GIGA-N

Article Number 6088793
Edition 2020-10
Page format 209.9 x 297.0 mm
Number of pages 80
PDF (7 MB)

General overview (Documents)

General overview 2021 International version

Edition 2020
Page format 209.9 x 297.0 mm
Number of pages 74
PDF (10 MB)

Certification booklet

Wilo-Atmos GIGA-N, Wilo-Yonos GIGA-N

Article Number 6088790
Edition 2021-01
Page format 209.9 x 297.0 mm
Number of pages 16
PDF (3 MB)

Certificate REACH (Documents)

REACH regulation

Edition 2020-08
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (158 KB)
Product list
Number of results: 110
Product descriptionNumber of polesMotor efficiency classPipe connection on the suction side DNsPipe connection on the pressure side DNdSpacer couplingMechanical sealRated power P2Gross weight, approx. mArticle numberGRD group