Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Stratos MAXO-D 65/0,5-12 PN6/10-R7 | Wilo

Stratos MAXO-D 65/0,5-12 PN6/10-R7

Article number: 2217984
Technical data
Hydraulic data
Energy efficiency index (EEI) ≤0.17
Maximum operating pressure PN 10 bar
Head max H max 0.0 m
Flow max hr Q max hr 45.0 m³/h
Flow max add Q max add 71.0 m³/h
Minimum suction head at 50 °C m 7 m
Minimum suction head at 95 °C m 15 m
Minimum suction head at 110 °C 23 m
Min. fluid temperature Tmin -10 °C
Max. fluid temperature Tmax 90 °C
Min. ambient temperature Tmin -10 °C
Max. ambient temperature Tmax 40 °C
Motor data
Mains connection 1~230 V ±10%, 50/60 Hz
Min current Imin 0.3 A
Max current Imax 4.17 A
Min. speed nmin 500 1/min
Max. speed nmax 3000 1/min
Power consumption P1 min 20 W
Power consumption P1 max 950 W
Emitted interference EN 61800-3;2004+A1;2012 /residential area (C1)
Interference resistance EN 61800-3;2004+A1;2012 /industrial environment (C2)
Insulation class F
Protection class IPX4D
Threaded cable connection 5 x M16x1.5
Materials
Pump housing Grey cast iron
Impeller PPS-GF40
Shaft Stainless steel
Bearing Carbon, antimony-impregnated
Installation dimensions
Pipe connection on the discharge side DNd DN 65
Pipe connection on the suction side DNs DN 65
Port-to-port length L0 340 mm
Function
Control mode
  • Δp-v for variable differential pressure
  • Δp-c for constant differential pressure
  • Q limit for limiting the maximum volume flow
  • Dynamic Adapt plus
  • ΔT-const. for constant differential temperature control
  • T-const. for constant temperature control
  • Constant Q for constant volume flow control
  • Multi Flow Adaptation
  • Δ T-const. for constant differential temperature control
  • User-defined PID control
  • Constant speed (n-const.)
Special features of the series
  • Heating/Cooling switching
  • Night set back
  • Heat quantity measurement
  • Cooling quantity measurement
  • Key locking function
  • No-Flow Stop
  • Reset function to factory setting
  • Adjustable volume flow limiter
  • Ability to save and restore configured pump settings (3 restoration points)
  • Fault and warning messages shown in plain text with advice on resolving the issue
Multi pump operation
  • Main/Standby
  • Parallel operation
Measurement value logging Heat and cooling capacity measurement
Display
  • Setpoint
  • Actual delivery head
  • Actual volume flow
  • Actual power consumption
  • Energy consumption
  • Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)
  • Warning messages in plain text (display status: yellow)
  • Error messages in plain text (display: red)
  • Pump venting (display status: blue)
  • Control mode
  • Active influences (e.g. STOP)
Display (can also be selected)
  • Speed
  • Heating quantity
  • Cooling quantity
  • Operating hours
  • Mains voltage
  • Warning message
  • Error message
Pump venting function Yes
Equipment
Approvals and labels
  • CE
  • VDE
  • EAC
Cold water insulation shell No
Display Graphic colour display (4.3 inches)
Display information Comfort Version: LCD display (large) for showing the head, flow volume, actual und cumulated current.
Pump control Electronic-controlled pump (high efficiency pump)
Quick electrical connection Wilo Connector
Thermal insulation shell No
Blocking-current proof motor yes
Particle filter yes
Key lock yes
Connectivity
Access via the Wilo-Assistant app Yes
Analogue signal as standard
  • 0-10 V
  • 2-10 V
  • 4-20 mA
  • 0-20 mA
  • PT1000
Bus communication via additional accessories
  • BACnet MS/TP
  • LON
  • Modbus RTU
  • CANopen
  • PLR
  • BACnet IP
  • Modbus TCP
Connection for Wilo-Smart Cloud Via Wilo-Smart Gateway
Digital input
  • Ext. OFF
  • Ext. MIN
  • Ext. MAX
  • MANUAL (BMS-OFF)
  • Key lock
  • Switchover between heating/cooling mode
Digital output
  • SSM
  • SBM
wire data exchange and remote operation Bluetooth

Stratos MAXO-D 65/0,5-12 PN6/10-R7-OEM

Standard: 1~ 230 V, 50/60 Hz, Option: 3~ 230 V, 50/60 Hz

SSM: Collective fault signal (NC contact in accordance with VDI 3814, load capacity 1 A, 250 V ~)

Product data
Brand Wilo
Product description Stratos MAXO-D 65/0,5-12 PN6/10-R7
Article number 2217984
EAN number 4062679195636
Colour Green/black/silver
Minimum order quantity 1
Date of sales availability 2021-09-01
Packaging
Packaging type Cardboard box
Packaging property Transport packaging
Pieces per pallet 4
Number per layer 2
Dimension, weight
Length with packaging 800 mm
Length L 340 mm
Height with packaging 525 mm
Height H 464 mm
Width with packaging 600 mm
Width W 570 mm
Gross weight, approx. m 66.6 kg
Net weight, approx. m 61.3 kg
Tender text

Premium smart-pump Wilo-Stratos MAXO-D-R7 (R7 = without internal temperature sensor)

High efficiency in-line glandless twin-head pump with EC motor and electronic power adjustment. Can be used for chilled water, heating water and water/glycol mixtures. Energy efficiency index (EEI) between ≤ 0.17 and ≤ 0.19 depending on pump type.

Control modes:

  • Permanent, automatic performance adjustment according to system requirements without setpoint specification Wilo Dynamic Adapt plus (factory setting). Up to 20% energy savings compared to dp-v control mode.
  • Constant temperature (T-const.)
  • Constant differential temperature (dT-const.)
  • Needs-based volume flow optimisation of the feeder pump through connectivity and communication between multiple pumps (Multi-Flow Adaptation).
  • Constant volume flow (Q-const.)
  • Differential pressure control (dp-c) to a remote point in the pipe network (index circuit evaluator)
  • Constant differential pressure (dp-c)
  • Variable differential pressure (dp-v) with the option to set the nominal duty point
  • Constant speed (n-const.)
  • User-defined PID control

Functions:

  • Heat quantity measurement (available with accessory Wilo fluid temperature sensor or analogue temperature sensors e.g. 2x PT1000)
  • Cooling quantity measurement (available with accessory Wilo fluid temperature sensor or analogue temperature sensors e.g. 2x PT1000)
  • Pump automatically deactivates when no flow is detected (No-Flow Stop)
  • Switchover between heating and cooling mode (automatic, external or manual) (automatic, available with the accessory Wilo fluid temperature sensor)
  • Adjustable volume flow limiter using the Q-Limit function (Qmin. and Qmax.)
  • Operating modes of twin-head pumps: Efficiency-optimised parallel operation for dp-c and dp-v, main and standby operation
  • Ability to save and restore configured pump settings (3 restoration points)
  • Fault and warning messages shown in plain text with advice on resolving the issue
  • Pump venting function for automatic venting of the rotor chamber
  • Automatic night setback (with the accessory Wilo fluid temperature sensor)
  • Automatic deblocking function and integrated full motor protection
  • Dry-running detection

Display:

  • Control mode
  • Setpoint
  • Volume flow
  • Temperature (available with accessory Wilo fluid temperature sensor)
  • Power consumption
  • Electric consumption
  • Active influences (e.g. STOP, No-Flow Stop)

Version:

  • 2 configurable analogue inputs: 0–10 V, 2–10 V, 0–20 mA, 4–20 mA and commercially available PT1000; +24 V DC power supply
  • 2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, heating/cooling, manual override (uncoupled from building automation), operation lock (key lock and remote operation configuration protection))
  • 2 configurable signal relays for run signals and fault messages
  • Slot for Wilo-CIF modules with interfaces for building automation BA (optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CANopen)
  • Wilo Net as a Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; twin-head pump operation and Wilo-Smart Gateway
  • Automatic emergency operation with definable pump speed for exceptional circumstances, e.g. bus communication or sensor value malfunction
  • Graphic colour display (4.3 inches) with one-button manual operation
  • Use the Wilo-Assistant app to read and set operating data and –among other things– set up a commissioning protocol through the Bluetooth interface (no further accessories required)
  • Integrated dual pump management (twin-head pumps are prewired) when using 2 single pumps as twin-head pump unit (connection via Wilo Net)
  • Cable break detection when using an analogue signal (in connection with 2 – 10 V or 4 – 20 mA)
  • Outdoor installation with weather protection possible in accordance with the installation and operating instructions
  • Pre-set date and time

Scope of delivery

  • Pump
  • 2x optimised Wilo-Connector, suitable for all sizes
  • 4x threaded cable gland, M16 x 1.5
  • 2x gaskets for threaded connection
  • Installation and operating instructions

Optional accessories:

  • CIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANopen
  • PT 1000 (B) pipe contact sensor (for domestic hot water)
  • PT 1000 (AA) sensor for installation in immersion well
  • Differential pressure sensor
  • Smart Gateway
  • Wilo fluid temperature sensor (can be retrofitted for recording and displaying the fluid temperature, heat and cooling quantity and using the temperature-controlled control modes T-const., dT-const.)
Operating Data
Min. fluid temperature Tmin -10 °C
Max. fluid temperature Tmax 90 °C
Min. ambient temperature Tmin -10 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 10 bar
Minimum suction head at 50 °C m 7 m
Minimum suction head at 95 °C m 15 m
Minimum suction head at 110 °C 23 m
Motor data
Energy efficiency index (EEI) ≤0.17
Emitted interference EN 61800-3;2004+A1;2012 /residential area (C1)
Interference resistance EN 61800-3;2004+A1;2012 /industrial environment (C2)
Mains connection 1~230 V, 50/60 Hz
Power consumption P1 max 950 W
Min. speed nmin 500 1/min
Max. speed nmax 3000 1/min
Protection class motor IPX4D
Threaded cable connection 5 x M16x1.5
Materials
Pump housing Grey cast iron
Impeller PPS-GF40
Shaft Stainless steel
Bearing Carbon, antimony-impregnated
Installation dimensions
Pipe connection on the suction side DNs DN 65
Pipe connection on the discharge side DNd DN 65
Port-to-port length L0 340 mm
Ordering information
Brand Wilo
Product description Stratos MAXO-D 65/0,5-12 PN6/10-R7
Net weight, approx. m 61.3 kg
Article number 2217984
Documents

Installation and operating instructions

Wilo-Stratos MAXO-R7

Article Number 2217836
Edition 2021-11
Page format 148.2 x 209.9 mm
Number of pages 168
PDF (737 KB)

Wilo-Stratos MAXO/-D/-Z

Article Number 2226401
Edition 2023-02
Page format 148.2 x 209.9 mm
Number of pages 272
PDF (6 MB)

Certification booklet

Stratos MAXO, Stratos MAXO-D, Stratos MAXO-Z, Stratos , Stratos-D, Stratos-Z, Stratos-ZD, Yonos MAXO,Yonos MAXO-D, Yonos MAXO-Z, Yonos ECO BMS, Yonos PARA HF, Stratos PARA, Stratos PARA-Z, TOP-Z, TOP-S Transportsysteme

Article Number 2209011
Edition 2022-11
Page format 209.9 x 297.0 mm
Number of pages 72
PDF (28 MB)

Certificate

Lithium Battery Test Summary / UN38.3

Page format 209.9 x 297.0 mm
Number of pages 1
PDF (179 KB)

BIM/CAD
Accessory

Continuous, infinitely variable control, differential pressure-sensitive CCe-HVAC system (25)

Continuous, infinitely variable control, temperature-dependent CCe-HVAC system (19)

Continuous, infinitely variable control, differential pressure-sensitive SCe-HVAC system (21)

Continuous, infinitely variable control, temperature-dependent SCe-HVAC system (13)

Pipe installation (2)

Pipe installation, adapter fitting (13)

Wall fixation/installation on a base (1)

Maintenance/replacement mechanical accessories (1)

Pump control/accessories (29)

Pump control/Smart control system (3)

Pump control/interface module (7)

Differential pressure detection (7)

Plug (1)