Catalogue creation
My favorites
Wilo-EMUport CORE | Wilo

Wilo-EMUport CORE

Separate and transport solid substances. Clean, safe and reliable.

Your advantages
Wilo-EMUport CORE

Separate and transport solid substances. Clean, safe and reliable.

Coarse solids can clog the sewage transport system especially around buildings and real estate development. The consequence: breakdowns and increased service costs. Wilo’s durable solution: the solids separation system Wilo-EMUport CORE. It provides the best operational reliability for clog-free transport. Moreover, it provides easy maintenance thanks to its hygienic dry well installation and easy access from outside. The complete system including a corrosion-free pump chamber and switching systems is also available for larger Wilo units. Tailored exactly to your requirements.

Your advantages

  • Maximum reliability by separating solids from the sewage: Large solids do not have to pass through the pump – no clogging
  • Economic thanks to a retrofit system for simple renovation of old pumping stations
  • Durable and corrosion-free due to the use of PE and PUR material
  • Easy maintenance, even during operation – thanks to hygienic dry well installation and easy access from outside and individual shut-off
  • Future-proof even with more solid content in the sewage
  • Flexible installation in buildings or in chambers from 1,500 mm diameter
  • Easy to integrate and ready for connection Plug&Pump system
  • Energy savings thanks to efficient submersible sewage pumps, optionally with IE3 motors
Series description
Wilo-EMUport CORE


Standard sewage lifting unit with solids separation system in accordance with DIN EN 12050-1 for installation in a building or in a pump chamber for outdoor installation.


Pumping of sewage containing faeces:

  • In cases where sewage cannot be led to the sewer system via a natural fall
  • For backflow resistant drainage


  • Two solids separation reservoirs that can be shut off individually
  • Level measurement with level sensor
  • Manual backwashing in the collection reservoir
  • Discharge connection with flange connection
  • Transparent cover on the supply box/distributor.
  • Two dry-installed submersible sewage pumps in alternating operation
  • Submersible sewage pumps with moisture monitoring for motor compartment and sealing chamber



Wilo-EMUport CORE 20.2-10/540


Standardised solids separation system


Max. inlet in m³/h


Number of installed pumps


Max. delivery head in m


Mains frequency:

  • 5 = 50 Hz
  • 6 = 60 Hz


Mains voltage:

  • 40 = 3~400 V
  • 38 = 3~380 V

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Max. continuous inlet: 20, 45 or 60 m³/h
  • Max. delivery head: 55 m
  • Positive suction head: 750 mm
  • Inlet connection: DN 200
  • Discharge connection:
    • CORE 20.2: DN 80
    • CORE 45.2/60.2: DN 100
  • Tank volume:
    • CORE 20.2: 40 l
    • CORE 45.2/60.2: 1200 l
  • Useable tank volume:
    • CORE 20.2: 295 l
    • CORE 45.2/60.2: 900 l


  • Collection reservoir: PE
  • Solids separation reservoir: PE
  • Supply box: PUR
  • Pipework: PE
  • Pumps: Grey cast iron
  • Gate valve: Grey cast iron
  • Discharge connection: PUR


Fully submersible and automatically operating sewage lifting unit with solids separation system and two submersible sewage pumps in alternating operation without peak-load operation.

Solids separation system with all-in-one gastight and watertight collection reservoir without constructive welded joints, as well as two separately lockable solids separation reservoirs. The collection reservoir has rounded edges, the tank bottom is bevelled, the deepest point is located directly below the pump. This prevents deposits and the drying of solids at critical points. With pre-filtering in the solids separation reservoirs, the solids are filtered from the fluid and only pre-filtered sewage is directed to the collection reservoir.

Pumping is performed by two high-performance submersible sewage pumps in dry well installation. The pumps are designed as a redundant system and run in alternating operation.

The level control is controlled by a level sensor.

Scope of delivery

Installation-ready sewage lifting unit is completely pre-assembled including Y-piece, level sensor and two pumps.


Installation and operating instructions

Wilo-EMUport CORE

Article Number 6092612
Edition 2022-01
Page format 209.9 x 297.0 mm
Number of pages 32
PDF (6 MB)

General overview

General Overview 2022 - International version

Edition 2022
Page format 209.9 x 297.0 mm
Number of pages 78
PDF (38 MB)

Certification booklet

Wilo-EMUport Core 20.2 / 45.2 / 50.2 / 60.2

Article Number 2546469
Edition 2021-07
Page format 209.9 x 297.0 mm
Number of pages 40
PDF (3 MB)

Certificate REACH

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)