Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-Rexa SOLID-Q | Wilo

Wilo-Rexa SOLID-Q

Wilo-Rexa SOLID-Q with Nexos Intelligence – The intelligent system solution for a smart sewage pump station

Your advantages
Wilo-Rexa SOLID

Wilo-Rexa SOLID-Q with Nexos Intelligence – The intelligent system solution for a smart sewage pump station

Pumping untreated sewage is becoming increasingly demanding due to the growing prevalence of solids and fibrous material which, in turn, leads to increased operating costs. The new Wilo-Rexa SOLID-Q with Nexos Intelligence is characterised by operational reliability, energy efficiency and the highest level of digital networking. The smart combination for cost effectiveness combined with the additional convenience in your day-to-day work.



Your advantages

  • Maximum operational reliability and reduced service costs, especially for pumping untreated sewage, thanks to self-cleaning properties
  • Lower energy costs thanks to high hydraulic efficiency and up to IE5 motor technology in wet and dry well installation (based on IEC TS 60034-30-2)
  • Corrosion protection provided by an optional Ceram coating for a long service life in aggressive media
  • A Digital Data Interface (DDI) with integrated vibration monitoring, data logger, web server and digital rating plate for convenient monitoring and system integration
  • Nexos Intelligence can be integrated for pump and system optimisation

Environmentally friendly properties

  • Highly efficient pump system with IE5 motor technology (based on IEC TS 60034-30-2) with high hydraulic efficiency
  • Corrosion protection provided by an optional Ceram coating for a long service life
  • Nexos Intelligence can be integrated for pump and system optimisation
  • Sustainable and carbon-neutral production and processes in our European factories
Series description
Wilo-Rexa SOLID-Q

Design

Submersible sewage pump with and without active cooling system for pumping untreated sewage for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Application

Pumping of

  • Untreated sewage with faeces and long-fibre components
  • Sewage containing faeces
  • Process water

Equipment/function

  • Surface-cooled motors or self-cooling motors with active cooling system
  • Asynchronous motors up to efficiency class IE3
  • Permanent magnet motors up to efficiency class IE5
  • Longitudinally watertight cable inlet

Typekey

Example.:

Wilo-Rexa SOLID-Q15-98A + FKT 20.2M-4/32GX-P4

Hydraulics:

SOLID-Q15-98A

SOLID

Submersible sewage pump with SOLID hydraulics

15

x10 = nominal discharge port e.g., DN 150

98

Performance indicator

A

Material version

  • A = Standard
  • B = Corrosion protection 1
  • D = Abrasion protection 1

T

SOLID impeller

  • T = closed two-channel impeller
  • G = semi-open single-channel impeller
  • Q = semi-open two-channel impeller

Motor:

FKT 20.2M-4/32GX-P4

FKT

Motor type:

  • T = surface-cooled motor without cooling system
  • FK, FKT, HC = Self-cooling motor with active cooling system

20

Size

2

Distinctive number

M

Shaft design

  • M = standard design
  • L = reinforced version

4

Number of poles

32

x10 = Package length in mm

G

Seal version:

  • G = two separate mechanical seals
  • K = block seal cartridge with two mechanical seals

X

With Ex approval

P4

Engine type

  • E = Asynchronous motors:
  • P = Permanent magnet motor
  • 4 = IE class (based on ISO 60034-30)

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode: S1 (FK, FKT, HC motor) or S2 (T motor, depending on performance)
  • Protection class: IP68
  • Fluid temperature: 3 - 40 °C, higher temperatures on request
  • Free ball passage:
    • T impeller: 78x105…150x150 mm
    • G impeller: 80 or 90 mm
    • Q impeller: 78 mm
  • Max. immersion depth: 20 m

Materials

  • Housing components: EN-GJL-250 or EN-GJS-500-7
  • Impeller: EN-GJL-250 or EN-GJS-500-7
  • Static gaskets: FPM
  • Sealing on pump side: SiC/SiC
  • Sealing on motor side: FPM, carbon/ceramic or SiC/SiC
  • Shaft: Stainless steel 1.4021

Construction

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Portable installation is possible, depending on type.

Hydraulics

The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter is 8 %. The following impeller shapes are currently used:

  • T = closed two-channel impeller
  • G = semi-open single-channel impeller
  • Q = semi-open two-channel impeller

In the SOLID-G and SOLID-Q, the gap between suction port and impeller can be readjusted later. This ensures uniform hydraulic efficiency.

Motor

Submersible motors with passive and active cooling are used for the drive:

  • T motors (surface-cooled motors) have passive cooling. They emit their heat directly into the surrounding fluid via the housing parts. For this reason, these motors can operated immersed in continuous duty (S1), depending on performance, and non-immersed in short-time duty (S2).
  • FK, FKT and HC motors are self-cooling and have an active cooling system. The waste heat is guided via the coolant (white oil or water-glycol mixture) to an integrated heat exchanger, and this releases the waste heat to the conveyed medium. As a result, these motors are suitable for continuous duty (S1) either in immersed or non-immersed state.

All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can be monitored with an optionally sealing chamber electrode. All filling fluids used are potentially biodegradable and environmentally safe.

In addition, depending on performance, high-efficiency motors are also available:

    • Asynchronous motors with efficiency class of IE3*
    • Permanent magnet motors with an efficiency class of IE4/5*

* (IE3/4 = based on IEC 60034-30, IE5 = based on IEC TS 60034-30-2)

The cable inlet on the motors is longitudinally watertight, cable lengths can be individually configured.

Seal

Fluid-side and motor-side sealing is possible in the following versions depending on the motor type:

  • Version G: Two independently-acting mechanical seals
  • Version K: Block seal cartridge with two independently acting mechanical seals

Scope of delivery

  • Submersible sewage pump
  • Connection cable with bare cable end
  • Fitted accessories
  • Operating and maintenance manual

Options

  • Special voltages
  • Monitoring devices for
    • Winding monitoring with PTC thermistor sensor or Pt100
    • Sealing chamber
    • Motor/terminal room
    • Storage temperature
  • Ceram coating C0 to C3 for abrasive and corrosive fluids
  • Ex-rated according to ATEX or FM
  • Nexos Intelligence:
    • Reduced downtime and service call-outs thanks to automatic detection and elimination of clogging
    • Lower energy costs due to the integrated automatic control for the optimal operating mode of the specific system
    • Convenient control and networking with the communication network via the integrated web server and Ethernet interface with standard network protocols in the pump
    • Increased operational reliability in the event of a fault thanks to the redundancy design of the integrated pump control
    • System solution with application-specific adaptable digital functions and digital interfaces

Accessories

  • Chains
  • Suspension unit or pump support foot
  • Fixation sets with anchor bolts
  • Switchgear, relays and plugs

Commissioning

Operation in wet well installation with non-immersed motor:

The surfacing of self-cooling motors (FK, FKT, HC motors) is permitted.

Surface-cooled motors (T motors) can be non-immersed for short periods (S2 operation) depending on the power! The maximum running time with non-immersed motor depends on the medium and ambient temperatures. The exact specifications concerning the operating mode and time (e.g. S2-15) can be found on the rating plate of the respective pump.

Dry-running protection system:

The hydraulics housing must always be immersed. In the case of fluctuating fluid levels, the system should shut down automatically once the minimum water submersion is reached. Please refer to the dimension drawings for this.

Horizontal installation:

Horizontal installation is not possible with these units!

Documents

Installation and operating instructions

Wilo Motor T 17.3, 20.2: EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6086016
Edition 2019-10
Number of pages 104
Language en, zh
PDF (4 MB)

Wilo Motor T 17.3, 20.2: EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6086012
Edition 2019-10
Number of pages 56
Language en
PDF (3 MB)

Wilo Motor FKT 20.2, 27.1, 27.2: EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6088784
Edition 2019-10
Number of pages 108
Language en, zh
PDF (4 MB)

Wilo Motor FKT 20.2, 27.1, 27.2: EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6086014
Edition 2019-10
Number of pages 60
Language en
PDF (3 MB)

Wilo DDI-I

Article Number 6086017
Edition 2023-06
Number of pages 108
Language en
PDF (8 MB)

Commissioning protocol Wilo DDI

Article Number 6088797
Edition 2021-01
Number of pages 2
Language language neutral
PDF (949 KB)

Certification booklet

Wilo T motor + EMU FA, Wilo T motor + Rexa SUPRA, Wilo T motor + Rexa SOLID

Article Number 6072704
Edition 2021-07
Number of pages 116
Language language neutral
PDF (10 MB)

Wilo FKT motor + EMU FA, Wilo FKT motor + Rexa SUPRA, Wilo FKT motor + Rexa SOLID

Article Number 6074691
Edition 2021-07
Number of pages 96
Language language neutral
PDF (9 MB)

Brochure

Wilo-Rexa SOLID-Q - The intelligent system solution for a smart sewage pump station

Number of pages 16
Language en
PDF (15 MB)

Product information Wilo-EFC. Powerful, flexible, cost-efficient.

Number of pages 8
Language en
PDF (8 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (279 KB)