Wilo-Sub TWI 4 | Wilo

Wilo-Sub TWI 4

The reliable and corrosion-resistant multistage 4″ submersible pump.

Wilo-TWI 4

The reliable and corrosion-resistant multistage 4″ submersible pump.

Your advantages

Long service life thanks to corrosion-resistant stainless steel, optionally in V4A quality
ACS certified for drinking water applications
A high degree of flexibility thanks to versions in the 4, 6, 8 and 10-inch area
High range of performance from 1 to 250 m³/h

Eco-friendly features

Durable stainless steel pump material as well as very easy maintenance and repair provide for a long service life
Energy-efficient pump hydraulics

Sub TWI 4, (3~400 V)

Design

Multistage 4" submersible pump in tie strap version for vertical or horizontal installation

Application

Designed for pumping drinking water (in accordance with ACS and RI.SE), rainwater and process water with up to 50 g/m³ sand content from wells and rainwater storage tanks for the following applications:

Irrigation
Sprinkling
Water supply
Pressure boosting
Ground water drainage and lowering

Equipment/function

Integrated non-return valve
Discharge port according to NEMA
Single-phase current motor with capacitor box with thermal motor protection

Typekey

Example:	Wilo-Sub TWI 4.01-09-C
TWI	Series
4	Diameter of the hydraulic unit in inches ["]
01	Rated volume flow [m³/h]
09	Number of hydraulic stages
C	Series generation

Technical data

Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
Submerged operating mode: S1
Fluid temperature: 3 – 30 °C
Minimum flow rate at motor: 0.1 m/s
Max. sand content: 50 g/m³
Max. number of starts: 20/h
Max. immersion depth: 150 m
IP rating: IP68
Discharge port: Rp 1¼ – Rp 2

Materials

Hydraulics housing: 1.4301 (AISI 304)
Impellers: 1.4301 (AISI 304)
Hydraulic shaft: 1.4057 (AISI 431)
Motor housing: 1.4301 (AISI 304)
Motor shaft: 1.4305 (AISI 303)

Construction

Submersible pump for vertical or horizontal installation.

Hydraulics

Tie strap version of the multistage submersible pump with radial or semi-axial impellers, integrated non-return valve, and a standardised 4" NEMA connection. Discharge port with threaded flange and female thread. All parts that come in contact with the fluid are made of corrosion-free materials.

Motor

Single-phase or three-phase current motor for direct starting. Sealed motor with lacquer-insulated, resin-covered winding, water-glycol filling and self-lubricating motor bearings.

Cooling

The motor is cooled by the pumped fluid. Always operate the pump in a submerged state.
Vertical installation is possible with or without cooling jacket.
Horizontal installation must be performed in conjunction with a cooling jacket.

Scope of delivery

Hydraulics + motor completely assembled
1.5 m or 2.5 m connection cable with drinking water approval
AC version including switchbox with capacitor and on/off switch
Installation and operating instructions

Options

Hydraulics in 1.4401 (AISI 316)
Motor in 1.4401 (AISI 316)
Pressure shroud version for the direct installation of the pump in the pipe system (max. inlet pressure: 10 bar)
Custom-made

Accessories

Cooling shroud
Diaphragm expansion tank
Gate valve
Float switch
Pressure switch
Electrode
Switchgear
Alarm switchgear
Casting resin kit
Connection cable

Installation and operating instructions

Wilo-Sub TWI 4..., TWI 4-...-QC

Article Number	6061724
Edition	1110
Number of pages	344
Language	da, en, et, fi, lv, mk, no, pt, sl, sr

PDF (2 MB)

Wilo-Sub TWI 4..., TWI 4-...-QC

Article Number	6061724
Edition	1110
Number of pages	28
Language	en

PDF (516 KB)

Certification booklet

Wilo-Sub TWI 4, Wilo-Sub TWI 6/TWI 06, Wilo-Sub TWI 8/TWI 08, Wilo-Sub TWI 010

Article Number	6080451
Edition	2022-02
Number of pages	24
Language	language neutral

PDF (4 MB)

Group Statement

Group Statement REACH

Edition	2021-05
Number of pages	5
Language	language neutral

PDF (271 KB)

Certificate

Wilo-Sub TWI

Article Number	6080451
Edition	1612
Number of pages	14
Language	language neutral

PDF (388 KB)

RCM

RCM 2223464

Number of pages	1
Language	language neutral

PDF (217 KB)

RCM 2223483

Number of pages	1
Language	language neutral

PDF (197 KB)

Standard Conformity

Standard Conformity 2223468-01

Number of pages	1
Language	language neutral

PDF (223 KB)

Number of results: 84

Mains connection

1~230 V, 50 Hz [39]

3~400 V, 50 Hz [45]

Rated power P₂

0.37 … 3 kW

[84]

Product description	Mains connection	Motor diameter Ø	Number of stages	Rated power P₂	Minimum efficiency index (MEI)	Connection	Article number	Price (excl. VAT)
Sub TWI 4.01-09-DM-D	3~400 V, 50 Hz	4 in (")	9	0,37 kW	≥0,4	Rp 1¼	6091300	AUD 1,595.-
Sub TWI 4.01-09-EM-D	1~230 V, 50 Hz	4 in (")	9	0,37 kW	≥0,4	Rp 1¼	6091301	AUD 2,066.-
Sub TWI 4.01-14-DM-D	3~400 V, 50 Hz	4 in (")	14	0,55 kW	≥0,4	Rp 1¼	6091302	AUD 1,763.-
Sub TWI 4.01-14-EM-D	1~230 V, 50 Hz	4 in (")	14	0,55 kW	≥0,4	Rp 1¼	6091303	AUD 2,276.-
Sub TWI 4.01-18-DM-D	3~400 V, 50 Hz	4 in (")	18	0,55 kW	≥0,4	Rp 1¼	6091304	AUD 1,866.-
Sub TWI 4.01-18-EM-D	1~230 V, 50 Hz	4 in (")	18	0,55 kW	≥0,4	Rp 1¼	6091305	AUD 2,361.-
Sub TWI 4.01-21-DM-D	3~400 V, 50 Hz	4 in (")	21	0,75 kW	≥0,4	Rp 1¼	6091306	AUD 2,063.-
Sub TWI 4.01-21-EM-D	1~230 V, 50 Hz	4 in (")	21	0,75 kW	≥0,4	Rp 1¼	6091307	AUD 2,599.-
Sub TWI 4.01-28-DM-D	3~400 V, 50 Hz	4 in (")	28	1,1 kW	≥0,4	Rp 1¼	6091308	AUD 2,412.-
Sub TWI 4.01-28-EM-D	1~230 V, 50 Hz	4 in (")	28	1,1 kW	≥0,4	Rp 1¼	6091309	AUD 3,019.-
Sub TWI 4.01-36-DM-D	3~400 V, 50 Hz	4 in (")	36	1,1 kW	≥0,4	Rp 1¼	6091310	AUD 2,791.-
Sub TWI 4.01-36-EM-D	1~230 V, 50 Hz	4 in (")	36	1,1 kW	≥0,4	Rp 1¼	6091311	AUD 3,378.-
Sub TWI 4.01-42-DM-D	3~400 V, 50 Hz	4 in (")	42	1,5 kW	≥0,4	Rp 1¼	6091312	AUD 3,212.-
Sub TWI 4.01-42-EM-D	1~230 V, 50 Hz	4 in (")	42	1,5 kW	≥0,4	Rp 1¼	6091313	AUD 3,942.-
Sub TWI 4.02-09-DM-D	3~400 V, 50 Hz	4 in (")	9	0,55 kW	≥0,7	Rp 1¼	6091314	AUD 1,602.-
Sub TWI 4.02-09-EM-D	1~230 V, 50 Hz	4 in (")	9	0,55 kW	≥0,4	Rp 1¼	6091315	AUD 2,115.-
Sub TWI 4.02-13-DM-D	3~400 V, 50 Hz	4 in (")	13	0,75 kW	≥0,7	Rp 1¼	6091316	AUD 1,783.-
Sub TWI 4.02-13-EM-D	1~230 V, 50 Hz	4 in (")	13	0,75 kW	≥0,7	Rp 1¼	6091317	AUD 2,334.-
Sub TWI 4.02-18-DM-D	3~400 V, 50 Hz	4 in (")	18	1,1 kW	≥0,7	Rp 1¼	6091318	AUD 2,081.-
Sub TWI 4.02-18-EM-D	1~230 V, 50 Hz	4 in (")	18	1,1 kW	≥0,7	Rp 1¼	6091319	AUD 2,673.-
Sub TWI 4.02-23-DM-D	3~400 V, 50 Hz	4 in (")	23	1,1 kW	≥0,7	Rp 1¼	6091320	AUD 2,207.-
Sub TWI 4.02-23-EM-D	1~230 V, 50 Hz	4 in (")	23	1,1 kW	≥0,7	Rp 1¼	6091321	AUD 2,838.-
Sub TWI 4.02-28-DM-D	3~400 V, 50 Hz	4 in (")	28	1,5 kW	≥0,7	Rp 1¼	6091322	AUD 2,513.-
Sub TWI 4.02-28-EM-D	1~230 V, 50 Hz	4 in (")	28	1,5 kW	≥0,7	Rp 1¼	6091323	AUD 3,294.-
Sub TWI 4.02-33-DM-D	3~400 V, 50 Hz	4 in (")	33	1,5 kW	≥0,7	Rp 1¼	6091324	AUD 2,780.-
Sub TWI 4.02-33-EM-D	1~230 V, 50 Hz	4 in (")	33	1,5 kW	≥0,7	Rp 1¼	6091325	AUD 3,499.-
Sub TWI 4.02-40-DM-D	3~400 V, 50 Hz	4 in (")	40	2,2 kW	≥0,7	Rp 1¼	6091326	AUD 3,326.-
Sub TWI 4.02-40-EM-D	1~230 V, 50 Hz	4 in (")	40	2,2 kW	≥0,7	Rp 1¼	6091327	AUD 4,131.-
Sub TWI 4.02-48-DM-D	3~400 V, 50 Hz	4 in (")	48	2,2 kW	≥0,7	Rp 1¼	6091328	AUD 3,695.-
Sub TWI 4.02-48-EM-D	1~230 V, 50 Hz	4 in (")	48	2,2 kW	≥0,7	Rp 1¼	6091329	AUD 4,499.-
Sub TWI 4.03-06-DM-D	3~400 V, 50 Hz	4 in (")	6	0,55 kW	≥0,7	Rp 1¼	6091330	AUD 1,516.-
Sub TWI 4.03-06-EM-D	1~230 V, 50 Hz	4 in (")	6	0,55 kW	≥0,7	Rp 1¼	6091331	AUD 2,051.-
Sub TWI 4.03-09-DM-D	3~400 V, 50 Hz	4 in (")	9	0,75 kW	≥0,7	Rp 1¼	6091332	AUD 1,670.-
Sub TWI 4.03-09-EM-D	1~230 V, 50 Hz	4 in (")	9	0,75 kW	≥0,7	Rp 1¼	6091333	AUD 2,242.-
Sub TWI 4.03-12-DM-D	3~400 V, 50 Hz	4 in (")	12	1,1 kW	≥0,7	Rp 1¼	6091334	AUD 1,904.-
Sub TWI 4.03-12-EM-D	1~230 V, 50 Hz	4 in (")	12	1,1 kW	≥0,7	Rp 1¼	6091335	AUD 2,505.-
Sub TWI 4.03-15-DM-D	3~400 V, 50 Hz	4 in (")	15	1,1 kW	≥0,7	Rp 1¼	6091336	AUD 1,985.-
Sub TWI 4.03-15-EM-D	1~230 V, 50 Hz	4 in (")	15	1,1 kW	≥0,7	Rp 1¼	6091337	AUD 1,608.-
Sub TWI 4.03-18-DM-D	3~400 V, 50 Hz	4 in (")	18	1,5 kW	≥0,7	Rp 1¼	6091338	AUD 2,239.-
Sub TWI 4.03-18-EM-D	1~230 V, 50 Hz	4 in (")	18	1,5 kW	≥0,7	Rp 1¼	6091339	AUD 2,950.-
Sub TWI 4.03-22-DM-D	3~400 V, 50 Hz	4 in (")	22	1,5 kW	≥0,7	Rp 1¼	6091340	AUD 2,342.-
Sub TWI 4.03-22-EM-D	1~230 V, 50 Hz	4 in (")	22	1,5 kW	≥0,7	Rp 1¼	6091341	AUD 3,082.-
Sub TWI 4.03-25-DM-D	3~400 V, 50 Hz	4 in (")	25	2,2 kW	≥0,7	Rp 1¼	6091342	AUD 2,765.-
Sub TWI 4.03-25-EM-D	1~230 V, 50 Hz	4 in (")	25	2,2 kW	≥0,7	Rp 1¼	6091343	AUD 3,572.-
Sub TWI 4.03-29-DM-D	3~400 V, 50 Hz	4 in (")	29	2,2 kW	≥0,7	Rp 1¼	6091344	AUD 2,892.-
Sub TWI 4.03-29-EM-D	1~230 V, 50 Hz	4 in (")	29	2,2 kW	≥0,7	Rp 1¼	6091345	AUD 3,678.-
Sub TWI 4.03-33-DM-D	3~400 V, 50 Hz	4 in (")	33	2,2 kW	≥0,7	Rp 1¼	6091346	AUD 3,089.-
Sub TWI 4.03-33-EM-D	1~230 V, 50 Hz	4 in (")	33	2,2 kW	≥0,7	Rp 1¼	6091347	AUD 3,875.-
Sub TWI 4.03-39-DM-D	3~400 V, 50 Hz	4 in (")	39	3 kW	≥0,7	Rp 1¼	6091348	AUD 3,737.-
Sub TWI 4.03-45-DM-D	3~400 V, 50 Hz	4 in (")	45	3 kW	≥0,7	Rp 1¼	6091349	AUD 3,949.-

Wilo-Sub TWI 4

The reliable and corrosion-resistant multistage 4″ submersible pump.

The reliable and corrosion-resistant multistage 4″ submersible pump.

Your advantages

Eco-friendly features

Design

Application

Equipment/function

Typekey

Technical data

Materials

Construction

Scope of delivery

Options

Accessories

Typekey

Technical data

Materials

Construction

Scope of delivery

Options

Accessories

Installation and operating instructions

Wilo-Sub TWI 4..., TWI 4-...-QC

Wilo-Sub TWI 4..., TWI 4-...-QC

Certification booklet

Wilo-Sub TWI 4, Wilo-Sub TWI 6/TWI 06, Wilo-Sub TWI 8/TWI 08, Wilo-Sub TWI 010

Group Statement

Group Statement REACH

Certificate

Wilo-Sub TWI

RCM

RCM 2223464

RCM 2223483

Standard Conformity

Standard Conformity 2223468-01

Mains connection

Rated power P2

Rated power P₂