Sub TWU 4.08-15-EM-C
| Hydraulic data | |
|---|---|
| Minimum efficiency index (MEI) | ≥0,4 |
| Maximum operating pressure PN | 11 bar |
| Max. sand content | 50 g/m³ |
| Max. immersion depth | 200 m |
| Max. volume flow Qmax | 13,0 m³/h |
| Optimal volume flow Qopt | 7,2 m³/h |
| Max. delivery head Hmax | 100,5 m |
| Optimal delivery head Hopt | 69,63 m |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 30 °C |
| Number of stages | 15 |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Rated power P2 | 2,2 kW |
| Rated speed n | 2869 1/min |
| Rated current IN | 14,8 A |
| Starting current I | 53 A |
| Activation type | Direct On Line (DOL) |
| Power factor cos φ100 | 0,94 |
| Max. switching frequency t | 20 1/h |
| Motor diameter DM | 98 mm |
| Cable | |
|---|---|
| Connection cable length L | 2,5 m |
| Cable cross-section | 4G1,5 mm² |
| Materials | |
|---|---|
| Pump housing | Stainless steel |
| Impeller | PPE |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the discharge side DNd | Rp 2 |
Wilo-Sub TWU 4
| Prices | |
|---|---|
| Price (excl. VAT) | EUR 2,093.- |
| Price group | PG5 |
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Sub TWU 4.08-15-EM-C |
| Article number | 6081622 |
| EAN number | 4048482738680 |
| Colour | Silver |
| Minimum order quantity | 1 |
| Date of sales availability | 2017-03-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 1150 mm |
| Length L | 1070 mm |
| Height with packaging | 200 mm |
| Height H | 98 mm |
| Width with packaging | 200 mm |
| Width W | 98 mm |
| Gross weight, approx. m | 24,5 kg |
| Net weight, approx. m | 22,5 kg |
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket.
For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³.
Scope of delivery:
- Hydraulics + motor completely assembled
- Connection cable approved for drinking water
- Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
- Installation and operating instructions
| Operating Data | |
|---|---|
| Max. delivery head Hmax | 100,5 m |
| Unit | |
|---|---|
| Minimum efficiency index (MEI) | ≥0,4 |
| Pipe connection on the discharge side DNd | Rp 2 |
| Maximum operating pressure p | 40,0 bar |
| Max. sand content | 50 g/m³ |
| Protection class motor | IP68 |
| Max. immersion depth | 200 m |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 30 °C |
| Net weight, approx. m | 22,5 kg |
| Max. diameter Dmax | 98 mm |
| Motor data | |
|---|---|
| Motor design | Submersible motor |
| Mains connection | 1~230 V, 50 Hz |
| Rated power P2 | 2,2 kW |
| Rated speed n | 2869 1/min |
| Rated current IN | 14,8 A |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 20 1/h |
| Motor diameter DM | 98 mm |
| Min. flow rate at the motor m/s | 0,08 m/s |
| Cable | |
|---|---|
| Connection cable length L | 2,5 m |
| Cable cross-section | 4G1,5 mm² |
| Materials | |
|---|---|
| Pump housing | Stainless steel |
| Motor housing | Stainless steel |
| Shaft | Stainless steel |
| Impeller | PPE |
| Ordering information | |
|---|---|
| Net weight, approx. m | 22,5 kg |
| Brand | Wilo |
| Product description | Sub TWU 4.08-15-EM-C |
| Article number | 6081622 |
Installation and operating instructions
Wilo-Sub TWU ..., TWU 4-...-QC, TWU 4-...-P&P
| Article Number | 2019023 |
| Edition | 1103 |
| Number of pages | 384 |
| Language | da, en, et, fi, lv, mk, no, pt, sl, sr |
PDF (2 MB)Wilo-Sub TWU ..., TWU 4-...-QC, TWU 4-...-P&P
| Article Number | 2019023 |
| Edition | 1103 |
| Number of pages | 30 |
| Language | en |
PDF (565 KB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (271 KB)Fittings (8) | ||||
Safety valve for protecting the system against overpressure when water-supply units and pressure boosting systems are utilised. Installation in accordance with EN 806 and local regulations (e.g. in Germany in accordance with DIN 1988). Note Safety valves are delivered with factory settings only. Response pressure: 10 % over factory-set pressure | ||||
Full-stroke safety valve R 1, PN 16 | 2007146 | EUR 802.- | ||
Safety valve for protecting the system against overpressure when water-supply units and pressure boosting systems are utilised. Installation in accordance with EN 806 and local regulations (e.g. in Germany in accordance with DIN 1988). Note Safety valves are delivered with factory settings only. Response pressure: 10 % over factory-set pressure | ||||
Safety valve for protecting the system against overpressure when water-supply units and pressure boosting systems are utilised. Installation in accordance with EN 806 and local regulations (e.g. in Germany in accordance with DIN 1988). Note Safety valves are delivered with factory settings only. Response pressure: 10 % over factory-set pressure | ||||
Pressure gauge for displaying the current pressure in the pipe network. Note Horizontal pressure connection | ||||
Pressure gauge 0 - 16 bar | 2028692 | EUR 46.- | ||
Pressure gauge for displaying the current pressure in the pipe network. Note Horizontal pressure connection | ||||
Pressure gauge 0 - 10 bar | 2033535 | EUR 22.- | ||
Pressure gauge for displaying the current pressure in the pipe network. Note Horizontal pressure connection | ||||
Pressure gauge 0 - 40 bar | 2502048 | EUR 17.- | ||
Pressure gauge for displaying the current pressure in the pipe network. Note Horizontal pressure connection | ||||
Pressure gauge for displaying the current pressure in the pipe network. Note Horizontal pressure connection | ||||
Installation/setup (2) | ||||
For fastening the Niro wire rope with 3 mm2 cross-section to the support hooks of 3" and 4" pumps. Scope of delivery
| ||||
For lowering a submersible motor pump (3"/4" pumps with lifting eye) into the borehole. Note Maximum weight load: 100 kg Scope of delivery
| ||||
Motor cooling (2) | ||||
Submersible-motor pumps can be equipped with a cooling jacket pipe to achieve the flow velocity necessary for motor cooling. Note In cases of horizontal installation, a cooling jacket must always be provided . Exception: Sprinkler pumps with VdS approval require no cooling jackets Scope of delivery
| ||||
Submersible-motor pumps can be equipped with a cooling jacket pipe to achieve the flow velocity necessary for motor cooling. This is recommended especially if:
Scope of delivery
| ||||
Pressure control (6) | ||||
Pressure reducer for the prevention of pressure damage and for reducing water consumption. In addition, irritating flow noise is minimised due to p = const. control. Version
| ||||
Pressure reducer R ¾ | 2531893 | EUR 110.- | ||
Pressure reducer for the prevention of pressure damage and for reducing water consumption. In addition, irritating flow noise is minimised due to p = const. control. Version
| ||||
Pressure reducer R 1 | 2531894 | EUR 126.- | ||
Pressure reducer for the prevention of pressure damage and for reducing water consumption. In addition, irritating flow noise is minimised due to p = const. control. Version
| ||||
Pressure reducer R 1¼ | 2531895 | EUR 211.- | ||
Pressure reducer for the prevention of pressure damage and for reducing water consumption. In addition, irritating flow noise is minimised due to p = const. control. Version
| ||||
Pressure reducer R 1½ | 2531896 | EUR 350.- | ||
Pressure reducer for the prevention of pressure damage and for reducing water consumption. In addition, irritating flow noise is minimised due to p = const. control. Version
| ||||
Pressure reducer for the prevention of pressure damage and for reducing water consumption. In addition, irritating flow noise is minimised due to p = const. control. Version
| ||||
Pressurised expansion tanks (32) | ||||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 100, PN 16 | 2524214 | EUR 993.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 200, PN 16 | 2524215 | EUR 1,726.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 300, PN 16 | 2524216 | EUR 2,062.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 400, PN 16 | 2524217 | EUR 2,794.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 500, PN 16 | 2524218 | EUR 3,028.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 600, PN 16 | 2524219 | EUR 4,403.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 800, PN 16 | 2524220 | EUR 5,355.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 1000, PN 16 | 2524221 | EUR 6,382.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 1000, PN 16 | 2528376 | EUR 10,552.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 1500, PN 16 | 2525744 | EUR 17,394.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 Duo 2000, PN 16 | 2528430 | EUR 20,870.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment throughflow, complete with throughflow fitting, including shut-off and drain For particularly high volume flow rates Piping with flange connection Built and tested in accordance with DIN 4807 T5, DIN DVGW Reg. no. NW-9481AU2123 and NW-9481AT2535 Approved and maintained in accordance with Pressure Appliances Directive 97/23/EG and further technical regulations Shutoff provided by customer Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 junior 80, PN 10 | 2515528 | EUR 858.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 junior 100, PN 10 | 2515529 | EUR 939.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 junior 200, PN 10 | 2515530 | EUR 1,253.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 junior 300, PN 10 | 2515531 | EUR 1,728.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Diaphragm expansion tank DT5 junior 400, PN 10 | 2524232 | EUR 1,844.- | ||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
Type-tested diaphragm pressure vessels for use in conjunction with drinking water, water-supply or pressure boosting systems. The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice Use of the diaphragm pressure vessels on the supply pressure side must comply with the specifications of the local water-supply companies. | ||||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Type D (33D-PN10) diaphragm expansion tank | 2534897 | EUR 237.- | ||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
NO VALUE | ||||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Diaphragm pressure vessel type DE (25DE-PN10) | 2515518 | EUR 172.- | ||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Diaphragm pressure vessel type DE (33DE-PN10) | 2515519 | EUR 305.- | ||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Diaphragm pressure vessel type DE (60DE) | 2515523 | EUR 628.- | ||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Diaphragm pressure vessel type DE (80DE) | 2515524 | EUR 725.- | ||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Diaphragm pressure vessel type DE (100DE) | 2515525 | EUR 1,233.- | ||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Diaphragm pressure vessel type DE (200DE) | 2511823 | EUR 1,322.- | ||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Diaphragm pressure vessel type DE (300DE) | 2515526 | EUR 1,383.- | ||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
The vessels are for the purpose of avoiding pressure surges in the system and reduce the switching frequency of the pumps/system. Equipment
Notice These expansion tanks are not in conformity with DIN 4807/T5 and, for that reason, not authorised for utilisation in drinking water systems in Germany! | ||||
Wall fixation/installation on a base (1) | ||||
Wall bracket incl. installation accessories for secure fixation of the Wilo-HiControl and Wilo-HiControl EK pressure and flow controllers, as well as Wilo-Fluidcontrol and Wilo-Fluidcontrol EK. Scope of delivery Fixation set comprising
| ||||
Pump control (2) | ||||
Microprocessor-controlled switchgear for level-dependent control of a submersible pump with digital signal transmitters. Individual parameters are entered via a four-digit, seven-segment display and a control knob. Functions
Equipment
Inputs
Outputs
*Note: Power supply must be provided by the customer! Configuration
| ||||
Microprocessor-controlled switchgear for level-dependent control of a submersible pump with digital signal transmitters. Individual parameters are entered via a four-digit, seven-segment display and a control knob. Functions
Equipment
Inputs
Outputs
*Note: Power supply must be provided by the customer! Configuration
| ||||
Pressure control (7) | ||||
Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery
| ||||
Pressure sensor, 0 - 10 bar | 2550661 | EUR 429.- | ||
Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery
| ||||
Pressure sensor, 0 - 16 bar | 2550662 | EUR 447.- | ||
Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery
| ||||
Pressure sensor, 0 - 25 bar | 2550663 | EUR 356.- | ||
Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery
| ||||
Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery
| ||||
In the shunt on the kit attached to the pipework on the pressure side for mounting an automatic pressure-dependent single-pump system in combination with an ER-1 switchgear that can evaluate the signal of the pressure switch. The diaphragm pressure vessel placed on top is for buffering leakages. Note The required connection cable is to be provided onsite. Scope of delivery
| ||||
For mounting an automatic single- or multi-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals for switchgear with a 4 – 20 mA input. Notice Take care to ensure that a non-return valve is placed between pump and kit! Scope of delivery
| ||||
Break tank/accessories (1) | ||||
The level indicator makes it possible to display the cistern level when using rainwater. The integrated level sensor records the percentage cistern volume up to a level of 5 m. Separate unit without communication with the AF400 Scope of delivery
| ||||
Cable (60) | ||||
Flexible copper cable for the freely selectable extension of the cable attached to the pump motor. Suitable for use in drinking water. Scope of delivery
| ||||
Earth cable, 1 x 25 mm² | 4075939 | EUR 2.- | ||
Flexible copper cable for the freely selectable extension of the cable attached to the pump motor. Suitable for use in drinking water. Scope of delivery
| ||||
Round cable, 2-core, with bare cable ends for extension of the signal cable located on the pump. The flexible PVC pipe is colour-coded, shielded and available in lengths measured in intervals of 1 m each. | ||||
NO VALUE1 | ||||
Quick connection motor cable for replacement of the standard cable with free cable ends of Wilo submersible pumps TWU 4-…-C; TWI 4-…-C, and TWI 6-…-C (with 4" motor). The kit enables a simple and rapid retroactive extension with quick-connect cables (available separately). Scope of delivery
Note: This cable is not intended for use with QC pumps. | ||||
Motor cable kit QC 4 x 1.5 mm², 2.5 m | 4096207 | EUR 69.- | ||
Quick connection motor cable for replacement of the standard cable with free cable ends of Wilo submersible pumps TWU 4-…-C; TWI 4-…-C, and TWI 6-…-C (with 4" motor). The kit enables a simple and rapid retroactive extension with quick-connect cables (available separately). Scope of delivery
Note: This cable is not intended for use with QC pumps. | ||||
Quick connection motor cable for replacement of the standard cable with free cable ends of Wilo submersible pumps TWU 4-…-CI; TWI 4-…-CI, and TWI 6-…-CI (with 4" motor). The kit enables a simple and rapid retroactive extension with quick-connect cables (available separately). Scope of delivery
Note: This cable is not intended for use with QC pumps. | ||||
Round cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
motor cable for drinking water 4 x 4 mm² | 6019995 | EUR 29.- | ||
Round cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
motor cable for drinking water 4 x 16 mm² | 6022013 | EUR 64.- | ||
Round cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
motor cable for drinking water 4 x 25 mm² | 6038861 | EUR 117.- | ||
Round cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BB-F 3G1,5 round ACS | 6045113 | EUR 2.- | ||
Round cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BB-F 4G1,5 round ACS | 6045510 | EUR 2.- | ||
Round cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BB-F 4G2,5 round ACS | 6045111 | EUR 5.- | ||
Round cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BB-F 4G4 round | 6007626 | EUR 8.- | ||
Round cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BBH2-F 4G6 flat | 6007614 | EUR 21.- | ||
Flat cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BBH2-F 4G25 flat | 6007547 | EUR 66.- | ||
Flat cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BBH2-F 4G4 flat | 6007618 | EUR 15.- | ||
Flat cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BBH2-F 4G10 flat | 6007624 | EUR 34.- | ||
Flat cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BBH2-F 4G2,5 flat | 6007636 | EUR 8.- | ||
Flat cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
cable S07BBH2-F 4G50 flat | 6020298 | EUR 123.- | ||
Flat cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
Flat cable with bare cable ends for extension of the motor cable located on the pump (max. immersion depth: 200 m). The cable is suitable for drinking water applications and available in lengths measured in intervals of 1 m each. Flexible copper cable in accordance with Class E of ACS 04 ACC Ll 021, NFC 15-100 AD8, BS 6920, IEC 60332-1. | ||||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Cable kit for 4 inch motors AISI 304, 4 x 1.5 mm², 1.5 m | 6091143 | EUR 62.- | ||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Cable kit for 4 inch motors AISI 304, 4 x 1.5 mm², 20 m | 6091144 | EUR 367.- | ||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Cable kit for 4 inch motors AISI 304, 4 x 1.5 mm², 30 m | 6091145 | EUR 493.- | ||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Cable kit for 4 inch motors AISI 304, 4 x 1.5 mm², 40 m | 6091146 | EUR 610.- | ||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Cable kit for 4 inch motors AISI 304, 4 x 1.5 mm², 50 m | 6091147 | EUR 722.- | ||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Cable kit for 4 inch motors AISI 304, 4 x 1.5 mm², 5 m | 6091148 | EUR 210.- | ||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Cable kit for 4 inch motors AISI 304, 4 x 1.5 mm², 10 m | 6091149 | EUR 267.- | ||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Kit for replacing existing connection cable on the motor. Consisting of a flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Notice: This cable is suitable for the TWU 4-…-D; TWI 4-…-D; TWI 6-…-D (with 4" motor) pumps only! | ||||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Motor cable QC 4 x 1,5 mm², 20 m | 4440091 | EUR 485.- | ||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Motor cable QC 4 x 1,5 mm², 30 m | 4087122 | EUR 546.- | ||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Motor cable QC 4 x 1,5 mm², 50 m | 4087129 | EUR 660.- | ||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Motor cable QC 4 x 1,5 mm², 80 m | 4087130 | EUR 812.- | ||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Motor cable QC 4 x 1,5 mm², 100 m | 4087131 | EUR 930.- | ||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Motor cable QC 4 x 2,5 mm², 50 m | 4087132 | EUR 881.- | ||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Motor cable QC 4 x 2,5 mm², 80 m | 4087136 | EUR 1,165.- | ||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Quick connection motor cable for quick and easy cable extension for Wilo submersible pumps in Quick Connect version or in combination with a Quick Connect kit. The Quick Connection motor cable is suitable for pumps with a nominal rated power of up to 7.5 kW maximum. The existing cable coupling enables direct connection to the Quick Connect plug of the QC pump or the QC kit. Scope of delivery
| ||||
Heat shrink cable sleeve for sealing a connection of two open cable ends. Scope of delivery
| ||||
heat-shrink connections 4 x 10 mm² and 16 mm² | 4029678 | EUR 110.- | ||
Heat shrink cable sleeve for sealing a connection of two open cable ends. Scope of delivery
| ||||
Heat shrink cable sleeve for sealing a connection of two open cable ends. Scope of delivery
| ||||
Kit for the safe connection of two open cable ends under water. Scope of delivery
| ||||
Sealing kit 4 x 10 to 4 x 25 mm² | 4065699 | EUR 160.- | ||
Kit for the safe connection of two open cable ends under water. Scope of delivery
| ||||
Sealing kit 3 x 1.5 to 4 x 1.5 mm² | 6001126 | EUR 62.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3 x 2.5 to 7 x 2.5 mm² | 6001128 | EUR 75.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3 x 4 - 4 x 4 mm² | 6001129 | EUR 72.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3x16 to 4G16 | 6000785 | EUR 126.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 7x1,5 | 6001127 | EUR 76.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3x6 | 6001130 | EUR 70.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 4G6 to 7x4 | 6001131 | EUR 144.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3x10 to 4G10 | 6001132 | EUR 126.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3x25 to 4G25 | 6001133 | EUR 126.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3x35 | 6001134 | EUR 118.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 4G35 | 6001135 | EUR 462.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3x50 to 4G50 round | 6001136 | EUR 496.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3x70 to 4G70 round | 6001137 | EUR 496.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit 3x95, 4G95, 4G50 flat | 6001138 | EUR 561.- | ||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Sealing kit for the water pressure-tight connection of power supply cables for submersible pumps. Scope of delivery
Processing notes The sealing mixture of resin and hardener must be processed at an ambient temperature of at least 20 °C. The hardening time is
The finished cable connection must harden completely before it is used under water! | ||||
Level control (21) | ||||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA65 with 10 m cable | 503211893 | EUR 205.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA65 with 20 m cable | 2004431 | EUR 306.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA65 with 30 m cable | 2004432 | EUR 414.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA KR1 S with 5 m cable | 6082806 | EUR 161.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | ||||
Float switch WAO 65, 10 m cable | 2006027 | EUR 205.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | ||||
Float switch WAO 65, 20 m cable | 2004429 | EUR 306.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | ||||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | ||||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 4 m | 2516278 | EUR 66.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 5 m | 500937990 | EUR 81.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 10 m | 2501937 | EUR 113.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 20 m | 2516283 | EUR 144.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 25 m | 2000601 | EUR 193.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 30 m | 2514045 | EUR 184.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 35 m | 2516284 | EUR 200.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 40 m | 2516285 | EUR 215.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Submersible electrode, 50 m | 2500315 | EUR 241.- | ||
Signal transmitter with connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. The H07 cable is approved for drinking water applications. | ||||
Signal transmitter without connection cable for protection against low water level for borehole pumps. To be connected to a switchgear with a triggering relay. Notice: The connection cable must be provided and connected by the customer! | ||||
Level control/accessories (1) | ||||
Connection cable for connecting a submersible electrode [only for Art. 64873]. Note Depending on the submersible electrode, a suitable connection material is required. | ||||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
More suitable services | |||
 Extended Warranty | Extended Warranty borehole/submersible pump TWU/TWI 3"-5" | 2219597 | |
In combination of a new pump or system Wilo offers an extended warranty of up to five years in combination with commissioning and maintenance by the Wilo Service. Extended warranty includes:
| |||
 Commissioning | Commissioning borehole/submersible pump TWU/TWI 3"-5" | 2219397 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||
 Maintenance | Maintenance COMFORTborehole/submersible pump TWU/TWI 3"-5" | 2219499 | |
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||