BM-B 50/215-3/4

Wilo-Comfort Controller for digital, stepless power control of one-pump and multiple-pump systems in heating, air-conditioning and ventilation applications. For conventional pumps with fixed speed.

Completely electronic Comfort-Controller (CC) in the sheet metal enclosure (colour: pebble grey), completely wired. Switchgear suitable for connection to 3/PE 400V/50 Hz three phase nets in accordance with IEC 60038 (other voltages on request), comprised of internal power supply, CPU, backup battery, analogue/digital modules, power pack with fuses, contactors and motor protection devices in addition to frequency converter and sine filter.

Fully graphics-capable touch screen with 3-colour backlight for indicating the operating status operation/ fault/ acknowledged fault, and supporting symbols and plain text for menu navigation in up to 27 languages, with European and Asiatic characters. 3 user levels, display and selection of menu language, passwords, operating parameters, elapsed time indicator (individual and total operating hours), history memory for operating and error messages with time stamp via real time clock, pump status and control variable actual value display, actual pressure display, diagram function, main switch, internal revision switch, Manual-0-Automatic for each pump. Operating mode selection Manual-0-Automatic for each pump via Touch panel, potential-free contacts for collective SBM/SSM run and fault signals (changeover contact) as well as ON/OFF connection for external systems (on-site potential-free NC contact), input 0/4-20 mA for external setpoint adjustment.

Overload protection via TWC, motor protection via motor protection switch, starting from 5.5 kW thermal overload relay.

Digital inputs for alarm signals, e.g. anti-frost protection (on-site potential-free NC contact), PID controller, automatic pump cycling and running time optimisation with multi-pump systems. Automatic, load-sensitive cut-in of 1 to n peak-load pump(s) depending on the following, programmable control variables:

• Pressure - constant, p-c
• Differential pressure - constant, dp-c
• Differential pressure - variable, dp-v
• Temperature setter, n= f(T)
• Speed setter, n=f(analogue In)
• Temperature control, T-c
• Differential pressure - constant, dT
• Differential pressure - variable, dT-v
• Other types of control on request

Three setpoints are selectable by default. Automatic fault-actuated switchover on idle pump(s). Short test run of pump(s) during standstill, pilot pump function. Option for live-zero evaluation for conductivity test (sensor/setpoint input), select from:

• Signal and all drives full load
• Signal and system shut-down
• Signal and one pump at speed adjustable on frequency converter

Extra charge for optional modules (installation in factory or later after technical clarification):

• For connection to BMS systems in accordance with VDI 3814, via analogue/GSM modem, web server
• For connection to bus systems: Profibus, LON-Bus, CAN-Bus, Modbus RTU, Ethernet, others on request.
• for external remote setpoint adjustment (differential pressure level) or manual control mode using 0/2 - 10 V signals.
• Evaluation relay for PTC, individual operation and fault signals.
• Battery-backed power supply unit
• Measurement of electrical parameters, such as voltage, current, effective power, power factor, etc.

Ordering example: Wilo CC-HVAC 6x11.0 FC BM: Switchgear for 6 pumps with P2=11.0 kW, with frequency converter & sine filter (FC=Frequency Converter), designed as switch cabinet floor model.

Scope of delivery

• Switchgear
• Installation and operating instructions
• Wiring diagram

Wilo-Comfort Controller for digital, stepless power control of one-pump and multiple-pump systems in heating, air-conditioning and ventilation applications. For conventional pumps with fixed speed.

Completely electronic Comfort-Controller (CC) in the sheet metal enclosure (colour: pebble grey), completely wired. Switchgear suitable for connection to 3/PE 400V/50 Hz three phase nets in accordance with IEC 60038 (other voltages on request), comprised of internal power supply, CPU, backup battery, analogue/digital modules, power pack with fuses, contactors and motor protection devices in addition to frequency converter and sine filter.

Fully graphics-capable touch screen with 3-colour backlight for indicating the operating status operation/ fault/ acknowledged fault, and supporting symbols and plain text for menu navigation in up to 27 languages, with European and Asiatic characters. 3 user levels, display and selection of menu language, passwords, operating parameters, elapsed time indicator (individual and total operating hours), history memory for operating and error messages with time stamp via real time clock, pump status and control variable actual value display, actual pressure display, diagram function, main switch, internal revision switch, Manual-0-Automatic for each pump. Operating mode selection Manual-0-Automatic for each pump via Touch panel, potential-free contacts for collective SBM/SSM run and fault signals (changeover contact) as well as ON/OFF connection for external systems (on-site potential-free NC contact), input 0/4-20 mA for external setpoint adjustment.

Overload protection via TWC, motor protection via motor protection switch, starting from 5.5 kW thermal overload relay.

Digital inputs for alarm signals, e.g. anti-frost protection (on-site potential-free NC contact), PID controller, automatic pump cycling and running time optimisation with multi-pump systems. Automatic, load-sensitive cut-in of 1 to n peak-load pump(s) depending on the following, programmable control variables:

• Pressure - constant, p-c
• Differential pressure - constant, dp-c
• Differential pressure - variable, dp-v
• Temperature setter, n= f(T)
• Speed setter, n=f(analogue In)
• Temperature control, T-c
• Differential pressure - constant, dT
• Differential pressure - variable, dT-v
• Other types of control on request

Three setpoints are selectable by default. Automatic fault-actuated switchover on idle pump(s). Short test run of pump(s) during standstill, pilot pump function. Option for live-zero evaluation for conductivity test (sensor/setpoint input), select from:

• Signal and all drives full load
• Signal and system shut-down
• Signal and one pump at speed adjustable on frequency converter

Extra charge for optional modules (installation in factory or later after technical clarification):

• For connection to BMS systems in accordance with VDI 3814, via analogue/GSM modem, web server
• For connection to bus systems: Profibus, LON-Bus, CAN-Bus, Modbus RTU, Ethernet, others on request.
• for external remote setpoint adjustment (differential pressure level) or manual control mode using 0/2 - 10 V signals.
• Evaluation relay for PTC, individual operation and fault signals.
• Battery-backed power supply unit
• Measurement of electrical parameters, such as voltage, current, effective power, power factor, etc.

Ordering example: Wilo CC-HVAC 6x11.0 FC BM: Switchgear for 6 pumps with P2=11.0 kW, with frequency converter & sine filter (FC=Frequency Converter), designed as switch cabinet floor model.

Scope of delivery

• Switchgear
• Installation and operating instructions
• Wiring diagram

Dualband-Rundstrahlantenne mit FME-Buchse zur Montage am Schaltschrank. Zubehör für die Schaltgeräte Control SC.../SCe.../CC.../CCe... in Verbindung mit GSM/GPRS-Modul.

Additional module for equipping the Wilo-CC/CCe-HVAC system switchgear series for outputting individual operation and fault signals via potential-free relay contacts (changeover contacts) such as:

• Operation pumps 1-2
• Operation frequency converter
• Malfunction pump 1-2
• Malfunction frequency converter
• Frost message (version HVAC)
• Low water (water supply)

in conjunction with the base module GLT and the connection cable signalling modules.

Version: Relay module with operating status LED's, secured on 35 mm DIN rail

Scope of delivery

• 1 signalling module
• 2 support bases
• 2 spacers
• 1 DIN rail
• 2 M4x10 screws

Connection cable for connecting up to 4 control modules with the GLT base module. Can be used in conjunction with switchgears of the CC/CCe-HVAC system. The number of connection cables required for control modules/signalling modules per CC(CCe switchgear is always 1.

Signal transmitter for wall fixation for differential pressure-sensitive infinitely variable speed control. With 5 m connection cable to the connection to the switchgear; greater distances should be extended on-site:

• Up to 25 m: 3 x 0.75 mm², shielded.
• Up to 250 m: 3 x 1.5 mm², shielded.

Scope of delivery

• With built-in line shock throttle
• 2 self-cutting screw union connections DIN 3862 Ød = 6 mm
• 5 m connection cable to the switchgear (3 x 0.75 mm²)
• 2 self-cutting screw union connections R 1/8 x Ød = 6 mm
• Copper helix required on-site

Signal transmitter for wall fixation for differential pressure-sensitive infinitely variable speed control. With 5 m connection cable to the connection to the switchgear; greater distances should be extended on-site:

• Up to 25 m: 3 x 0.75 mm², shielded.
• Up to 250 m: 3 x 1.5 mm², shielded.

Scope of delivery

• With built-in line shock throttle
• 2 self-cutting screw union connections DIN 3862 Ød = 6 mm
• 5 m connection cable to the switchgear (3 x 0.75 mm²)
• 2 self-cutting screw union connections R 1/8 x Ød = 6 mm
• Copper helix required on-site

Wilo-Comfort Controller for digital, stepless power control of one-pump and multiple-pump systems in heating, air-conditioning and ventilation applications. For conventional pumps with fixed speed.

Completely electronic Comfort-Controller (CC) in the sheet metal enclosure (colour: pebble grey), completely wired. Switchgear suitable for connection to 3/PE 400V/50 Hz three phase nets in accordance with IEC 60038 (other voltages on request), comprised of internal power supply, CPU, backup battery, analogue/digital modules, power pack with fuses, contactors and motor protection devices in addition to frequency converter and sine filter.

Fully graphics-capable touch screen with 3-colour backlight for indicating the operating status operation/ fault/ acknowledged fault, and supporting symbols and plain text for menu navigation in up to 27 languages, with European and Asiatic characters. 3 user levels, display and selection of menu language, passwords, operating parameters, elapsed time indicator (individual and total operating hours), history memory for operating and error messages with time stamp via real time clock, pump status and control variable actual value display, actual pressure display, diagram function, main switch, internal revision switch, Manual-0-Automatic for each pump. Operating mode selection Manual-0-Automatic for each pump via Touch panel, potential-free contacts for collective SBM/SSM run and fault signals (changeover contact) as well as ON/OFF connection for external systems (on-site potential-free NC contact), input 0/4-20 mA for external setpoint adjustment.

Overload protection via TWC, motor protection via motor protection switch, starting from 5.5 kW thermal overload relay.

Digital inputs for alarm signals, e.g. anti-frost protection (on-site potential-free NC contact), PID controller, automatic pump cycling and running time optimisation with multi-pump systems. Automatic, load-sensitive cut-in of 1 to n peak-load pump(s) depending on the following, programmable control variables:

• Pressure - constant, p-c
• Differential pressure - constant, dp-c
• Differential pressure - variable, dp-v
• Temperature setter, n= f(T)
• Speed setter, n=f(analogue In)
• Temperature control, T-c
• Differential pressure - constant, dT
• Differential pressure - variable, dT-v
• Other types of control on request

Three setpoints are selectable by default. Automatic fault-actuated switchover on idle pump(s). Short test run of pump(s) during standstill, pilot pump function. Option for live-zero evaluation for conductivity test (sensor/setpoint input), select from:

• Signal and all drives full load
• Signal and system shut-down
• Signal and one pump at speed adjustable on frequency converter

Extra charge for optional modules (installation in factory or later after technical clarification):

• For connection to BMS systems in accordance with VDI 3814, via analogue/GSM modem, web server
• For connection to bus systems: Profibus, LON-Bus, CAN-Bus, Modbus RTU, Ethernet, others on request.
• for external remote setpoint adjustment (differential pressure level) or manual control mode using 0/2 - 10 V signals.
• Evaluation relay for PTC, individual operation and fault signals.
• Battery-backed power supply unit
• Measurement of electrical parameters, such as voltage, current, effective power, power factor, etc.

Ordering example: Wilo CC-HVAC 6x11.0 FC BM: Switchgear for 6 pumps with P2=11.0 kW, with frequency converter & sine filter (FC=Frequency Converter), designed as switch cabinet floor model.

Scope of delivery

• Switchgear
• Installation and operating instructions
• Wiring diagram

Wilo-Comfort Controller for digital, stepless power control of one-pump and multiple-pump systems in heating, air-conditioning and ventilation applications. For conventional pumps with fixed speed.

Completely electronic Comfort-Controller (CC) in the sheet metal enclosure (colour: pebble grey), completely wired. Switchgear suitable for connection to 3/PE 400V/50 Hz three phase nets in accordance with IEC 60038 (other voltages on request), comprised of internal power supply, CPU, backup battery, analogue/digital modules, power pack with fuses, contactors and motor protection devices in addition to frequency converter and sine filter.

Fully graphics-capable touch screen with 3-colour backlight for indicating the operating status operation/ fault/ acknowledged fault, and supporting symbols and plain text for menu navigation in up to 27 languages, with European and Asiatic characters. 3 user levels, display and selection of menu language, passwords, operating parameters, elapsed time indicator (individual and total operating hours), history memory for operating and error messages with time stamp via real time clock, pump status and control variable actual value display, actual pressure display, diagram function, main switch, internal revision switch, Manual-0-Automatic for each pump. Operating mode selection Manual-0-Automatic for each pump via Touch panel, potential-free contacts for collective SBM/SSM run and fault signals (changeover contact) as well as ON/OFF connection for external systems (on-site potential-free NC contact), input 0/4-20 mA for external setpoint adjustment.

Overload protection via TWC, motor protection via motor protection switch, starting from 5.5 kW thermal overload relay.

Digital inputs for alarm signals, e.g. anti-frost protection (on-site potential-free NC contact), PID controller, automatic pump cycling and running time optimisation with multi-pump systems. Automatic, load-sensitive cut-in of 1 to n peak-load pump(s) depending on the following, programmable control variables:

• Pressure - constant, p-c
• Differential pressure - constant, dp-c
• Differential pressure - variable, dp-v
• Temperature setter, n= f(T)
• Speed setter, n=f(analogue In)
• Temperature control, T-c
• Differential pressure - constant, dT
• Differential pressure - variable, dT-v
• Other types of control on request

Three setpoints are selectable by default. Automatic fault-actuated switchover on idle pump(s). Short test run of pump(s) during standstill, pilot pump function. Option for live-zero evaluation for conductivity test (sensor/setpoint input), select from:

• Signal and all drives full load
• Signal and system shut-down
• Signal and one pump at speed adjustable on frequency converter

Extra charge for optional modules (installation in factory or later after technical clarification):

• For connection to BMS systems in accordance with VDI 3814, via analogue/GSM modem, web server
• For connection to bus systems: Profibus, LON-Bus, CAN-Bus, Modbus RTU, Ethernet, others on request.
• for external remote setpoint adjustment (differential pressure level) or manual control mode using 0/2 - 10 V signals.
• Evaluation relay for PTC, individual operation and fault signals.
• Battery-backed power supply unit
• Measurement of electrical parameters, such as voltage, current, effective power, power factor, etc.

Ordering example: Wilo CC-HVAC 6x11.0 FC BM: Switchgear for 6 pumps with P2=11.0 kW, with frequency converter & sine filter (FC=Frequency Converter), designed as switch cabinet floor model.

Scope of delivery

• Switchgear
• Installation and operating instructions
• Wiring diagram

Dualband-Rundstrahlantenne mit FME-Buchse zur Montage am Schaltschrank. Zubehör für die Schaltgeräte Control SC.../SCe.../CC.../CCe... in Verbindung mit GSM/GPRS-Modul.

Additional module for equipping the Wilo-CC/CCe-HVAC system switchgear series for outputting individual operation and fault signals via potential-free relay contacts (changeover contacts) such as:

• Operation pumps 1-2
• Operation frequency converter
• Malfunction pump 1-2
• Malfunction frequency converter
• Frost message (version HVAC)
• Low water (water supply)

in conjunction with the base module GLT and the connection cable signalling modules.

Version: Relay module with operating status LED's, secured on 35 mm DIN rail

Scope of delivery

• 1 signalling module
• 2 support bases
• 2 spacers
• 1 DIN rail
• 2 M4x10 screws

Additional module for equipping the Wilo-CC/CCe-HVAC system switchgear series when using the temperature-dependent control modes. An address modules is also supplied for complying with hardware-side addressing.

Version: Module to be arranged on a 35 mm DIN rail with four channels in order to detect temperature sensors which have to be provided by the customer (PT100/PT1000) in 2 or 3-wire technology.

• Feed temperature (TV)
• Return temperature (TR)
• Process temperature (TP)
• Outside temperature (TA)

Connection cable for connecting up to 4 control modules with the GLT base module. Can be used in conjunction with switchgears of the CC/CCe-HVAC system. The number of connection cables required for control modules/signalling modules per CC(CCe switchgear is always 1.

Wilo-Smart Controller for digital, stepless power control of one-pump and multi-pump systems in heating, air-conditioning and ventilation applications.

SC-FC version: For the control of conventional fixed speed pumps via contactors (cascade connection), but control of a pump via frequency converters as a base-load pump, control of the peak-load pumps in cascade connection.

Hardware

Fully electronic Wilo-Smart Controller (SC) in steel sheeting enclosure (colour: pebble grey), comprised of internal power supply, microprocessor with "Soft-SPS", analogue and digital inputs and outputs, LCD display (backlit) for displaying operating data, control parameters, operating states of the pumps, error messages and history memory. LEDs for display of system status (operation/fault), setting of operating parameters and acknowledgement of fault signals via "Red Knob Technology", lockable main switch, potential-free contacts for SBM/SSM collective operation and collective fault signals, contacts for external On/Off and 2nd setpoint, conductivity test of the sensor cable. Fuse protection of the pump motors and frequency converter: By motor protection switch in the direct starting version; by fusible cut-out in the star-delta-starting version in combination with thermal triggers. Contactors for switching on the pumps; star-delta-starting models include thermal triggering and a time relay for the star-delta combination. Frequency converter with sine filter for infinitely variable control of the base-load pump. Actual value output via analogue signal 0-10 V for external measurement/display option, 10 V corresponds to the sensor end value, input 0/4-20 mA for external setpoint adjustment. Automatic, load-sensitive cut-in from 1 to n peak-load pump(s) depending on the control variables

• Pressure - constant, p-c
• Differential pressure - constant, dp-c
• Differential pressure - variable, dp-v
• Temperature setter, n = f(Tx)
• Speed setter, n=f(analogue In)
• Differential pressure - constant, dT

Software functions

Fully automatic control for 1 to n pumps with frequency-controlled base-load pump by means of setpoint/actual value comparison, 4-20 mA sensor signal (conductivity test) for control variable actual values, menu navigation with symbols and menu numbers.

2 parameter sets can be selected: Easy Menu (setpoint & control mode) or expert Menu (operation and control parameters)

Can be selected by Customer Service with or without standby pump, automatic switching of an operating pump to the reserve pump in the event of a fault, operating mode of the pumps can be selected freely (manual, off, automatic), elapsed time indicator for each pump and system, switching cycle counter for each pump and system.

Monitoring of Max. and Min. values of the system with adjustable delay times and limits, external On/Off via contact for deactivation of the Automatic mode of the system, error memory of the last 16 faults, setpoint switching of 2nd setpoint can be activated by contact, SBM and SSM logic reversal possible, parameters pre-set at the factory for simple commissioning.

Automatic, configurable pump cycling

• Standard setting: Impulse - The base-load pump is cycled at each new demand, regardless of operating hours
• Alternative: Pump cycling dependent on operating hours, cycling of the base-load pump after the specified operating hours

Automatic pump trial run (pump kick)

• Can be activated
• Time between two pump trial runs is freely programmable

Standards followed

• Electrical Equipment of Machines EN 60204-1
• Low-voltage switchgear combinations EN 61439-1 and 61439-2
• EMC - Immunity for Industrial Environments EN 61000-6-2
• EMC emitted interference for domestic accommodation, trade and commercial premises and small companies EN 61000-6-3 (for SC-FC only to 7.5 kW, over this EN 61000-6-4 emitted interference industrial premises)

Extra charge for optional modules for connection to BMS and bus systems (installation at the factory or subsequently after technical clarification):

• H-0-A (manual-zero-automatic) switch: Preselection of the operating mode of each pump and manual operation in the event of a controller fault "Manual" (emergency/test mode available at mains power, motor protection available), "O" (pump switched off – cannot be switched on using the controller) and "Auto" (pump enabled for automatic mode via the controller).
• Evaluation relay for PTC
• Individual running and fault signals
• Converter 0/2-10 volts into 0/4…20 mA
• Soft starter for peak-load pumps
• Connection to BMS systems in accordance with VDI 3814
• Bus systems: BACnet, LON, Modbus RTU

Scope of delivery

• Switchgear
• Installation and operating instructions
• Wiring diagram

Wilo-Smart Controller for digital, stepless power control of one-pump and multi-pump systems in heating, air-conditioning and ventilation applications.

SC-FC version: For the control of conventional fixed speed pumps via contactors (cascade connection), but control of a pump via frequency converters as a base-load pump, control of the peak-load pumps in cascade connection.

Hardware

Fully electronic Wilo-Smart Controller (SC) in steel sheeting enclosure (colour: pebble grey), comprised of internal power supply, microprocessor with "Soft-SPS", analogue and digital inputs and outputs, LCD display (backlit) for displaying operating data, control parameters, operating states of the pumps, error messages and history memory. LEDs for display of system status (operation/fault), setting of operating parameters and acknowledgement of fault signals via "Red Knob Technology", lockable main switch, potential-free contacts for SBM/SSM collective operation and collective fault signals, contacts for external On/Off and 2nd setpoint, conductivity test of the sensor cable. Fuse protection of the pump motors and frequency converter: By motor protection switch in the direct starting version; by fusible cut-out in the star-delta-starting version in combination with thermal triggers. Contactors for switching on the pumps; star-delta-starting models include thermal triggering and a time relay for the star-delta combination. Frequency converter with sine filter for infinitely variable control of the base-load pump. Actual value output via analogue signal 0-10 V for external measurement/display option, 10 V corresponds to the sensor end value, input 0/4-20 mA for external setpoint adjustment. Automatic, load-sensitive cut-in from 1 to n peak-load pump(s) depending on the control variables

• Pressure - constant, p-c
• Differential pressure - constant, dp-c
• Differential pressure - variable, dp-v
• Temperature setter, n = f(Tx)
• Speed setter, n=f(analogue In)
• Differential pressure - constant, dT

Software functions

Fully automatic control for 1 to n pumps with frequency-controlled base-load pump by means of setpoint/actual value comparison, 4-20 mA sensor signal (conductivity test) for control variable actual values, menu navigation with symbols and menu numbers.

2 parameter sets can be selected: Easy Menu (setpoint & control mode) or expert Menu (operation and control parameters)

Can be selected by Customer Service with or without standby pump, automatic switching of an operating pump to the reserve pump in the event of a fault, operating mode of the pumps can be selected freely (manual, off, automatic), elapsed time indicator for each pump and system, switching cycle counter for each pump and system.

Monitoring of Max. and Min. values of the system with adjustable delay times and limits, external On/Off via contact for deactivation of the Automatic mode of the system, error memory of the last 16 faults, setpoint switching of 2nd setpoint can be activated by contact, SBM and SSM logic reversal possible, parameters pre-set at the factory for simple commissioning.

Automatic, configurable pump cycling

• Standard setting: Impulse - The base-load pump is cycled at each new demand, regardless of operating hours
• Alternative: Pump cycling dependent on operating hours, cycling of the base-load pump after the specified operating hours

Automatic pump trial run (pump kick)

• Can be activated
• Time between two pump trial runs is freely programmable

Standards followed

• Electrical Equipment of Machines EN 60204-1
• Low-voltage switchgear combinations EN 61439-1 and 61439-2
• EMC - Immunity for Industrial Environments EN 61000-6-2
• EMC emitted interference for domestic accommodation, trade and commercial premises and small companies EN 61000-6-3 (for SC-FC only to 7.5 kW, over this EN 61000-6-4 emitted interference industrial premises)

Extra charge for optional modules for connection to BMS and bus systems (installation at the factory or subsequently after technical clarification):

• H-0-A (manual-zero-automatic) switch: Preselection of the operating mode of each pump and manual operation in the event of a controller fault "Manual" (emergency/test mode available at mains power, motor protection available), "O" (pump switched off – cannot be switched on using the controller) and "Auto" (pump enabled for automatic mode via the controller).
• Evaluation relay for PTC
• Individual running and fault signals
• Converter 0/2-10 volts into 0/4…20 mA
• Soft starter for peak-load pumps
• Connection to BMS systems in accordance with VDI 3814
• Bus systems: BACnet, LON, Modbus RTU

Scope of delivery

• Switchgear
• Installation and operating instructions
• Wiring diagram

난방, 공조 및 환기 애플리케이션에서 싱글 및 멀티 펌프 시스템의 디지털 무단 출력 제어를 위한 Wilo-Smart Controller.

SC 버전: 컨택터를 통한 기존의 고정 속도 펌프 제어용(종속 연결).

하드웨어

강판 하우징(색상: 페블 그레이)의 완전 전자식 Wilo-Smart Controller(SC). 내부 전력 공급, "Soft PLC"가 있는 마이크로프로세서, 아날로그 및 디지털 입력 및 출력단자, 작동 데이터 표시용 LCD 디스플레이(백라이트), 제어반 파라미터, 펌프 작동 상태, 에러 메시지 및 히스토리 기록으로 구성됨. 시스템 상태(운전/고장) 표시용 LED, 작동 파라미터 설정 및 "녹색 버튼 기술"을 통한 고장 신호 확인, 차단 가능한 주 스위치, 통합 운전 및 통합 고장 신호(SBM/SSM)용 자유 전압 접점, 외부 On/Off 및 2개의 규정값용 접점, 센서 구간의 전기전도도 검사. 펌프 모터의 퓨즈 보호: 직접 기동 버전에서는 모터 보호 스위치를 통해, 스타 델타 기동 버전에서는 차단기를 열 트리거와 조합하여 보호. 펌프를 켜기 위한 컨택터, 스타 델타 기동 버전에서는 열 트리거 및 스타 델타 조합용 시간 릴레이 포함. 외부 측정/표시 옵션을 위한 아날로그 신호 0-10V 이용 실제값 출력(10V는 센서 최종값에 해당함). 외부 설정값 조정용 입력단자 0/4-20mA, 제어 변수에 따라 1~n개의 피크 부하 펌프가 부하 감응에 의해 자동으로 켜짐

• 압력 - 일정, p-c
• 차압 - 일정, dp-c
• 온도 레귤레이터, n=f(Tx)
• 온도차 - 일정, dT

소프트웨어 기능

목표값/실제값 비교를 통한 1~n개 펌프의 전자동 제어, 제어 변수 실제값용 4-20mA 센서 신호(전기전도도 검사), 아이콘 및 메뉴 번호를 이용한 메뉴 네비게이션.

파라미터 세트 2개 선택 가능: Easy 메뉴(설정값 & 제어 유형) 또는 Expert 메뉴(운전 및 제어반 파라미터).

고객 서비스를 통해 예비 펌프 포함 또는 미포함 선택 가능, 작동 펌프 고장 시 예비 펌프로 자동 변환, 펌프 작동 모드 자유롭게 선택 가능(수동, 정지, 자동), 각 펌프 및 시스템당 경과 시간 표시기, 각 펌프 및 시스템당 스위칭 사이클 카운터.

지연 시간 및 한계를 설정할 수 있는 시스템의 최대 및 최소값 모니터링, 시스템 자동 모드 비활성화용 접점을 통한 외부 On/Off, 마지막 16개의 고장에 대한 고장 메모리, 접점을 통해 2개의 설정값 전환 활성화 가능, SBM 및 SSM 로직 전환 가능, 간단한 작동 시작을 위해 공장에서 사전 설정된 파라미터.

설정 가능한 자동 펌프 교체

• 기본 설정: 임펄스 – 새로운 요구 사항이 있을 때마다 매번 운전 시간에 관계없이 기본 부하 펌프가 교체됩니다.
• 그 외의 대안: 운전 시간에 따른 펌프 교체, 설정 가능한 운전 시간에 따른 기본 부하 펌프의 주기적 펌프 교체

자동 펌프 시험 운전(주기적 펌프 작동)

• 활성화 가능
• 2회의 펌프 시험 운전 사이 시간 자유롭게 프로그래밍 가능

표준 준수

• 기계의 전기 장비 EN 60204-1
• 저전압 스위치 기어 조합 EN 61439-1 및 -2
• 산업 지역의 전자파 적합성 내성 EN 61000-6-2
• 주거, 상업 지역 및 영세업의 전자파 적합성 장해 EN 61000-6-3(SC-FC에서는 최대 7.5kW까지만, 그 이상은 EN 61000-6-4 산업 지역 전자파 장해)

BMS 및 버스 시스템에 연결하기 위한 모듈 및 옵션 모듈의 추가 비용(출고 시 장착 또는 추후 기술적 확인 후 장착):

• H-0-A(수동-정지-자동) 스위치: 모든 펌프의 작동 모드 사전 선택 및 컨트롤러 장애 시 "수동"(비상/테스트 모드, 모터 보호 기능 있음), "O"(펌프 꺼짐 – 컨트롤을 통해 켤 수 없음) 및 "자동"(컨트롤을 통해 펌프의 자동 모드 승인됨) 수동 운전.
• PTC용 분석 릴레이
• 개별 운전 및 고장 신호
• 0/2-10V에서 0/4-20mA로 변환하는 컨버터
• 피크 부하 펌프용 소프트 시동
• VDI 3814에 따른 BMS 시스템에 연결
• 버스 시스템: BACnet, LON, Modbus RTU

제품 구성

• 스위치 기어
• 설치 및 사용 설명서
• 배선도

난방, 공조 및 환기 애플리케이션에서 싱글 및 멀티 펌프 시스템의 디지털 무단 출력 제어를 위한 Wilo-Smart Controller.

SC 버전: 컨택터를 통한 기존의 고정 속도 펌프 제어용(종속 연결).

하드웨어

강판 하우징(색상: 페블 그레이)의 완전 전자식 Wilo-Smart Controller(SC). 내부 전력 공급, "Soft PLC"가 있는 마이크로프로세서, 아날로그 및 디지털 입력 및 출력단자, 작동 데이터 표시용 LCD 디스플레이(백라이트), 제어반 파라미터, 펌프 작동 상태, 에러 메시지 및 히스토리 기록으로 구성됨. 시스템 상태(운전/고장) 표시용 LED, 작동 파라미터 설정 및 "녹색 버튼 기술"을 통한 고장 신호 확인, 차단 가능한 주 스위치, 통합 운전 및 통합 고장 신호(SBM/SSM)용 자유 전압 접점, 외부 On/Off 및 2개의 규정값용 접점, 센서 구간의 전기전도도 검사. 펌프 모터의 퓨즈 보호: 직접 기동 버전에서는 모터 보호 스위치를 통해, 스타 델타 기동 버전에서는 차단기를 열 트리거와 조합하여 보호. 펌프를 켜기 위한 컨택터, 스타 델타 기동 버전에서는 열 트리거 및 스타 델타 조합용 시간 릴레이 포함. 외부 측정/표시 옵션을 위한 아날로그 신호 0-10V 이용 실제값 출력(10V는 센서 최종값에 해당함). 외부 설정값 조정용 입력단자 0/4-20mA, 제어 변수에 따라 1~n개의 피크 부하 펌프가 부하 감응에 의해 자동으로 켜짐

• 압력 - 일정, p-c
• 차압 - 일정, dp-c
• 온도 레귤레이터, n=f(Tx)
• 온도차 - 일정, dT

소프트웨어 기능

목표값/실제값 비교를 통한 1~n개 펌프의 전자동 제어, 제어 변수 실제값용 4-20mA 센서 신호(전기전도도 검사), 아이콘 및 메뉴 번호를 이용한 메뉴 네비게이션.

파라미터 세트 2개 선택 가능: Easy 메뉴(설정값 & 제어 유형) 또는 Expert 메뉴(운전 및 제어반 파라미터).

고객 서비스를 통해 예비 펌프 포함 또는 미포함 선택 가능, 작동 펌프 고장 시 예비 펌프로 자동 변환, 펌프 작동 모드 자유롭게 선택 가능(수동, 정지, 자동), 각 펌프 및 시스템당 경과 시간 표시기, 각 펌프 및 시스템당 스위칭 사이클 카운터.

지연 시간 및 한계를 설정할 수 있는 시스템의 최대 및 최소값 모니터링, 시스템 자동 모드 비활성화용 접점을 통한 외부 On/Off, 마지막 16개의 고장에 대한 고장 메모리, 접점을 통해 2개의 설정값 전환 활성화 가능, SBM 및 SSM 로직 전환 가능, 간단한 작동 시작을 위해 공장에서 사전 설정된 파라미터.

설정 가능한 자동 펌프 교체

• 기본 설정: 임펄스 – 새로운 요구 사항이 있을 때마다 매번 운전 시간에 관계없이 기본 부하 펌프가 교체됩니다.
• 그 외의 대안: 운전 시간에 따른 펌프 교체, 설정 가능한 운전 시간에 따른 기본 부하 펌프의 주기적 펌프 교체

자동 펌프 시험 운전(주기적 펌프 작동)

• 활성화 가능
• 2회의 펌프 시험 운전 사이 시간 자유롭게 프로그래밍 가능

표준 준수

• 기계의 전기 장비 EN 60204-1
• 저전압 스위치 기어 조합 EN 61439-1 및 -2
• 산업 지역의 전자파 적합성 내성 EN 61000-6-2
• 주거, 상업 지역 및 영세업의 전자파 적합성 장해 EN 61000-6-3(SC-FC에서는 최대 7.5kW까지만, 그 이상은 EN 61000-6-4 산업 지역 전자파 장해)

BMS 및 버스 시스템에 연결하기 위한 모듈 및 옵션 모듈의 추가 비용(출고 시 장착 또는 추후 기술적 확인 후 장착):

• H-0-A(수동-정지-자동) 스위치: 모든 펌프의 작동 모드 사전 선택 및 컨트롤러 장애 시 "수동"(비상/테스트 모드, 모터 보호 기능 있음), "O"(펌프 꺼짐 – 컨트롤을 통해 켤 수 없음) 및 "자동"(컨트롤을 통해 펌프의 자동 모드 승인됨) 수동 운전.
• PTC용 분석 릴레이
• 개별 운전 및 고장 신호
• 0/2-10V에서 0/4-20mA로 변환하는 컨버터
• 피크 부하 펌프용 소프트 시동
• VDI 3814에 따른 BMS 시스템에 연결
• 버스 시스템: BACnet, LON, Modbus RTU

제품 구성

• 스위치 기어
• 설치 및 사용 설명서
• 배선도

Dualband-Rundstrahlantenne mit FME-Buchse zur Montage am Schaltschrank. Zubehör für die Schaltgeräte Control SC.../SCe.../CC.../CCe... in Verbindung mit GSM/GPRS-Modul.

Additional module for equipping the Wilo-CC/CCe-HVAC system switchgear series for outputting individual operation and fault signals via potential-free relay contacts (changeover contacts) such as:

• Operation pumps 1-2
• Operation frequency converter
• Malfunction pump 1-2
• Malfunction frequency converter
• Frost message (version HVAC)
• Low water (water supply)

in conjunction with the base module GLT and the connection cable signalling modules.

Version: Relay module with operating status LED's, secured on 35 mm DIN rail

Scope of delivery

• 1 signalling module
• 2 support bases
• 2 spacers
• 1 DIN rail
• 2 M4x10 screws

Signal transmitter for wall fixation for differential pressure-sensitive infinitely variable speed control. With 5 m connection cable to the connection to the switchgear; greater distances should be extended on-site:

• Up to 25 m: 3 x 0.75 mm², shielded.
• Up to 250 m: 3 x 1.5 mm², shielded.

Scope of delivery

• With built-in line shock throttle
• 2 self-cutting screw union connections DIN 3862 Ød = 6 mm
• 5 m connection cable to the switchgear (3 x 0.75 mm²)
• 2 self-cutting screw union connections R 1/8 x Ød = 6 mm
• Copper helix required on-site

Signal transmitter for wall fixation for differential pressure-sensitive infinitely variable speed control. With 5 m connection cable to the connection to the switchgear; greater distances should be extended on-site:

• Up to 25 m: 3 x 0.75 mm², shielded.
• Up to 250 m: 3 x 1.5 mm², shielded.

Scope of delivery

• With built-in line shock throttle
• 2 self-cutting screw union connections DIN 3862 Ød = 6 mm
• 5 m connection cable to the switchgear (3 x 0.75 mm²)
• 2 self-cutting screw union connections R 1/8 x Ød = 6 mm
• Copper helix required on-site

Wilo-Smart Controller for digital, stepless power control of one-pump and multi-pump systems in heating, air-conditioning and ventilation applications.

SC-FC version: For the control of conventional fixed speed pumps via contactors (cascade connection), but control of a pump via frequency converters as a base-load pump, control of the peak-load pumps in cascade connection.

Hardware

Fully electronic Wilo-Smart Controller (SC) in steel sheeting enclosure (colour: pebble grey), comprised of internal power supply, microprocessor with "Soft-SPS", analogue and digital inputs and outputs, LCD display (backlit) for displaying operating data, control parameters, operating states of the pumps, error messages and history memory. LEDs for display of system status (operation/fault), setting of operating parameters and acknowledgement of fault signals via "Red Knob Technology", lockable main switch, potential-free contacts for SBM/SSM collective operation and collective fault signals, contacts for external On/Off and 2nd setpoint, conductivity test of the sensor cable. Fuse protection of the pump motors and frequency converter: By motor protection switch in the direct starting version; by fusible cut-out in the star-delta-starting version in combination with thermal triggers. Contactors for switching on the pumps; star-delta-starting models include thermal triggering and a time relay for the star-delta combination. Frequency converter with sine filter for infinitely variable control of the base-load pump. Actual value output via analogue signal 0-10 V for external measurement/display option, 10 V corresponds to the sensor end value, input 0/4-20 mA for external setpoint adjustment. Automatic, load-sensitive cut-in from 1 to n peak-load pump(s) depending on the control variables

• Pressure - constant, p-c
• Differential pressure - constant, dp-c
• Differential pressure - variable, dp-v
• Temperature setter, n = f(Tx)
• Speed setter, n=f(analogue In)
• Differential pressure - constant, dT

Software functions

Fully automatic control for 1 to n pumps with frequency-controlled base-load pump by means of setpoint/actual value comparison, 4-20 mA sensor signal (conductivity test) for control variable actual values, menu navigation with symbols and menu numbers.

2 parameter sets can be selected: Easy Menu (setpoint & control mode) or expert Menu (operation and control parameters)

Can be selected by Customer Service with or without standby pump, automatic switching of an operating pump to the reserve pump in the event of a fault, operating mode of the pumps can be selected freely (manual, off, automatic), elapsed time indicator for each pump and system, switching cycle counter for each pump and system.

Monitoring of Max. and Min. values of the system with adjustable delay times and limits, external On/Off via contact for deactivation of the Automatic mode of the system, error memory of the last 16 faults, setpoint switching of 2nd setpoint can be activated by contact, SBM and SSM logic reversal possible, parameters pre-set at the factory for simple commissioning.

Automatic, configurable pump cycling

• Standard setting: Impulse - The base-load pump is cycled at each new demand, regardless of operating hours
• Alternative: Pump cycling dependent on operating hours, cycling of the base-load pump after the specified operating hours

Automatic pump trial run (pump kick)

• Can be activated
• Time between two pump trial runs is freely programmable

Standards followed

• Electrical Equipment of Machines EN 60204-1
• Low-voltage switchgear combinations EN 61439-1 and 61439-2
• EMC - Immunity for Industrial Environments EN 61000-6-2
• EMC emitted interference for domestic accommodation, trade and commercial premises and small companies EN 61000-6-3 (for SC-FC only to 7.5 kW, over this EN 61000-6-4 emitted interference industrial premises)

Extra charge for optional modules for connection to BMS and bus systems (installation at the factory or subsequently after technical clarification):

• H-0-A (manual-zero-automatic) switch: Preselection of the operating mode of each pump and manual operation in the event of a controller fault "Manual" (emergency/test mode available at mains power, motor protection available), "O" (pump switched off – cannot be switched on using the controller) and "Auto" (pump enabled for automatic mode via the controller).
• Evaluation relay for PTC
• Individual running and fault signals
• Converter 0/2-10 volts into 0/4…20 mA
• Soft starter for peak-load pumps
• Connection to BMS systems in accordance with VDI 3814
• Bus systems: BACnet, LON, Modbus RTU

Scope of delivery

• Switchgear
• Installation and operating instructions
• Wiring diagram

Wilo-Smart Controller for digital, stepless power control of one-pump and multi-pump systems in heating, air-conditioning and ventilation applications.

SC-FC version: For the control of conventional fixed speed pumps via contactors (cascade connection), but control of a pump via frequency converters as a base-load pump, control of the peak-load pumps in cascade connection.

Hardware

Fully electronic Wilo-Smart Controller (SC) in steel sheeting enclosure (colour: pebble grey), comprised of internal power supply, microprocessor with "Soft-SPS", analogue and digital inputs and outputs, LCD display (backlit) for displaying operating data, control parameters, operating states of the pumps, error messages and history memory. LEDs for display of system status (operation/fault), setting of operating parameters and acknowledgement of fault signals via "Red Knob Technology", lockable main switch, potential-free contacts for SBM/SSM collective operation and collective fault signals, contacts for external On/Off and 2nd setpoint, conductivity test of the sensor cable. Fuse protection of the pump motors and frequency converter: By motor protection switch in the direct starting version; by fusible cut-out in the star-delta-starting version in combination with thermal triggers. Contactors for switching on the pumps; star-delta-starting models include thermal triggering and a time relay for the star-delta combination. Frequency converter with sine filter for infinitely variable control of the base-load pump. Actual value output via analogue signal 0-10 V for external measurement/display option, 10 V corresponds to the sensor end value, input 0/4-20 mA for external setpoint adjustment. Automatic, load-sensitive cut-in from 1 to n peak-load pump(s) depending on the control variables

• Pressure - constant, p-c
• Differential pressure - constant, dp-c
• Differential pressure - variable, dp-v
• Temperature setter, n = f(Tx)
• Speed setter, n=f(analogue In)
• Differential pressure - constant, dT

Software functions

Fully automatic control for 1 to n pumps with frequency-controlled base-load pump by means of setpoint/actual value comparison, 4-20 mA sensor signal (conductivity test) for control variable actual values, menu navigation with symbols and menu numbers.

2 parameter sets can be selected: Easy Menu (setpoint & control mode) or expert Menu (operation and control parameters)

Can be selected by Customer Service with or without standby pump, automatic switching of an operating pump to the reserve pump in the event of a fault, operating mode of the pumps can be selected freely (manual, off, automatic), elapsed time indicator for each pump and system, switching cycle counter for each pump and system.

Monitoring of Max. and Min. values of the system with adjustable delay times and limits, external On/Off via contact for deactivation of the Automatic mode of the system, error memory of the last 16 faults, setpoint switching of 2nd setpoint can be activated by contact, SBM and SSM logic reversal possible, parameters pre-set at the factory for simple commissioning.

Automatic, configurable pump cycling

• Standard setting: Impulse - The base-load pump is cycled at each new demand, regardless of operating hours
• Alternative: Pump cycling dependent on operating hours, cycling of the base-load pump after the specified operating hours

Automatic pump trial run (pump kick)

• Can be activated
• Time between two pump trial runs is freely programmable

Standards followed

• Electrical Equipment of Machines EN 60204-1
• Low-voltage switchgear combinations EN 61439-1 and 61439-2
• EMC - Immunity for Industrial Environments EN 61000-6-2
• EMC emitted interference for domestic accommodation, trade and commercial premises and small companies EN 61000-6-3 (for SC-FC only to 7.5 kW, over this EN 61000-6-4 emitted interference industrial premises)

Extra charge for optional modules for connection to BMS and bus systems (installation at the factory or subsequently after technical clarification):

• H-0-A (manual-zero-automatic) switch: Preselection of the operating mode of each pump and manual operation in the event of a controller fault "Manual" (emergency/test mode available at mains power, motor protection available), "O" (pump switched off – cannot be switched on using the controller) and "Auto" (pump enabled for automatic mode via the controller).
• Evaluation relay for PTC
• Individual running and fault signals
• Converter 0/2-10 volts into 0/4…20 mA
• Soft starter for peak-load pumps
• Connection to BMS systems in accordance with VDI 3814
• Bus systems: BACnet, LON, Modbus RTU

Scope of delivery

• Switchgear
• Installation and operating instructions
• Wiring diagram

난방, 공조 및 환기 애플리케이션에서 싱글 및 멀티 펌프 시스템의 디지털 무단 출력 제어를 위한 Wilo-Smart Controller.

SC 버전: 컨택터를 통한 기존의 고정 속도 펌프 제어용(종속 연결).

하드웨어

강판 하우징(색상: 페블 그레이)의 완전 전자식 Wilo-Smart Controller(SC). 내부 전력 공급, "Soft PLC"가 있는 마이크로프로세서, 아날로그 및 디지털 입력 및 출력단자, 작동 데이터 표시용 LCD 디스플레이(백라이트), 제어반 파라미터, 펌프 작동 상태, 에러 메시지 및 히스토리 기록으로 구성됨. 시스템 상태(운전/고장) 표시용 LED, 작동 파라미터 설정 및 "녹색 버튼 기술"을 통한 고장 신호 확인, 차단 가능한 주 스위치, 통합 운전 및 통합 고장 신호(SBM/SSM)용 자유 전압 접점, 외부 On/Off 및 2개의 규정값용 접점, 센서 구간의 전기전도도 검사. 펌프 모터의 퓨즈 보호: 직접 기동 버전에서는 모터 보호 스위치를 통해, 스타 델타 기동 버전에서는 차단기를 열 트리거와 조합하여 보호. 펌프를 켜기 위한 컨택터, 스타 델타 기동 버전에서는 열 트리거 및 스타 델타 조합용 시간 릴레이 포함. 외부 측정/표시 옵션을 위한 아날로그 신호 0-10V 이용 실제값 출력(10V는 센서 최종값에 해당함). 외부 설정값 조정용 입력단자 0/4-20mA, 제어 변수에 따라 1~n개의 피크 부하 펌프가 부하 감응에 의해 자동으로 켜짐

• 압력 - 일정, p-c
• 차압 - 일정, dp-c
• 온도 레귤레이터, n=f(Tx)
• 온도차 - 일정, dT

소프트웨어 기능

목표값/실제값 비교를 통한 1~n개 펌프의 전자동 제어, 제어 변수 실제값용 4-20mA 센서 신호(전기전도도 검사), 아이콘 및 메뉴 번호를 이용한 메뉴 네비게이션.

파라미터 세트 2개 선택 가능: Easy 메뉴(설정값 & 제어 유형) 또는 Expert 메뉴(운전 및 제어반 파라미터).

고객 서비스를 통해 예비 펌프 포함 또는 미포함 선택 가능, 작동 펌프 고장 시 예비 펌프로 자동 변환, 펌프 작동 모드 자유롭게 선택 가능(수동, 정지, 자동), 각 펌프 및 시스템당 경과 시간 표시기, 각 펌프 및 시스템당 스위칭 사이클 카운터.

지연 시간 및 한계를 설정할 수 있는 시스템의 최대 및 최소값 모니터링, 시스템 자동 모드 비활성화용 접점을 통한 외부 On/Off, 마지막 16개의 고장에 대한 고장 메모리, 접점을 통해 2개의 설정값 전환 활성화 가능, SBM 및 SSM 로직 전환 가능, 간단한 작동 시작을 위해 공장에서 사전 설정된 파라미터.

설정 가능한 자동 펌프 교체

• 기본 설정: 임펄스 – 새로운 요구 사항이 있을 때마다 매번 운전 시간에 관계없이 기본 부하 펌프가 교체됩니다.
• 그 외의 대안: 운전 시간에 따른 펌프 교체, 설정 가능한 운전 시간에 따른 기본 부하 펌프의 주기적 펌프 교체

자동 펌프 시험 운전(주기적 펌프 작동)

• 활성화 가능
• 2회의 펌프 시험 운전 사이 시간 자유롭게 프로그래밍 가능

표준 준수

• 기계의 전기 장비 EN 60204-1
• 저전압 스위치 기어 조합 EN 61439-1 및 -2
• 산업 지역의 전자파 적합성 내성 EN 61000-6-2
• 주거, 상업 지역 및 영세업의 전자파 적합성 장해 EN 61000-6-3(SC-FC에서는 최대 7.5kW까지만, 그 이상은 EN 61000-6-4 산업 지역 전자파 장해)

BMS 및 버스 시스템에 연결하기 위한 모듈 및 옵션 모듈의 추가 비용(출고 시 장착 또는 추후 기술적 확인 후 장착):

• H-0-A(수동-정지-자동) 스위치: 모든 펌프의 작동 모드 사전 선택 및 컨트롤러 장애 시 "수동"(비상/테스트 모드, 모터 보호 기능 있음), "O"(펌프 꺼짐 – 컨트롤을 통해 켤 수 없음) 및 "자동"(컨트롤을 통해 펌프의 자동 모드 승인됨) 수동 운전.
• PTC용 분석 릴레이
• 개별 운전 및 고장 신호
• 0/2-10V에서 0/4-20mA로 변환하는 컨버터
• 피크 부하 펌프용 소프트 시동
• VDI 3814에 따른 BMS 시스템에 연결
• 버스 시스템: BACnet, LON, Modbus RTU

제품 구성

• 스위치 기어
• 설치 및 사용 설명서
• 배선도

난방, 공조 및 환기 애플리케이션에서 싱글 및 멀티 펌프 시스템의 디지털 무단 출력 제어를 위한 Wilo-Smart Controller.

SC 버전: 컨택터를 통한 기존의 고정 속도 펌프 제어용(종속 연결).

하드웨어

강판 하우징(색상: 페블 그레이)의 완전 전자식 Wilo-Smart Controller(SC). 내부 전력 공급, "Soft PLC"가 있는 마이크로프로세서, 아날로그 및 디지털 입력 및 출력단자, 작동 데이터 표시용 LCD 디스플레이(백라이트), 제어반 파라미터, 펌프 작동 상태, 에러 메시지 및 히스토리 기록으로 구성됨. 시스템 상태(운전/고장) 표시용 LED, 작동 파라미터 설정 및 "녹색 버튼 기술"을 통한 고장 신호 확인, 차단 가능한 주 스위치, 통합 운전 및 통합 고장 신호(SBM/SSM)용 자유 전압 접점, 외부 On/Off 및 2개의 규정값용 접점, 센서 구간의 전기전도도 검사. 펌프 모터의 퓨즈 보호: 직접 기동 버전에서는 모터 보호 스위치를 통해, 스타 델타 기동 버전에서는 차단기를 열 트리거와 조합하여 보호. 펌프를 켜기 위한 컨택터, 스타 델타 기동 버전에서는 열 트리거 및 스타 델타 조합용 시간 릴레이 포함. 외부 측정/표시 옵션을 위한 아날로그 신호 0-10V 이용 실제값 출력(10V는 센서 최종값에 해당함). 외부 설정값 조정용 입력단자 0/4-20mA, 제어 변수에 따라 1~n개의 피크 부하 펌프가 부하 감응에 의해 자동으로 켜짐

• 압력 - 일정, p-c
• 차압 - 일정, dp-c
• 온도 레귤레이터, n=f(Tx)
• 온도차 - 일정, dT

소프트웨어 기능

목표값/실제값 비교를 통한 1~n개 펌프의 전자동 제어, 제어 변수 실제값용 4-20mA 센서 신호(전기전도도 검사), 아이콘 및 메뉴 번호를 이용한 메뉴 네비게이션.

파라미터 세트 2개 선택 가능: Easy 메뉴(설정값 & 제어 유형) 또는 Expert 메뉴(운전 및 제어반 파라미터).

고객 서비스를 통해 예비 펌프 포함 또는 미포함 선택 가능, 작동 펌프 고장 시 예비 펌프로 자동 변환, 펌프 작동 모드 자유롭게 선택 가능(수동, 정지, 자동), 각 펌프 및 시스템당 경과 시간 표시기, 각 펌프 및 시스템당 스위칭 사이클 카운터.

지연 시간 및 한계를 설정할 수 있는 시스템의 최대 및 최소값 모니터링, 시스템 자동 모드 비활성화용 접점을 통한 외부 On/Off, 마지막 16개의 고장에 대한 고장 메모리, 접점을 통해 2개의 설정값 전환 활성화 가능, SBM 및 SSM 로직 전환 가능, 간단한 작동 시작을 위해 공장에서 사전 설정된 파라미터.

설정 가능한 자동 펌프 교체

• 기본 설정: 임펄스 – 새로운 요구 사항이 있을 때마다 매번 운전 시간에 관계없이 기본 부하 펌프가 교체됩니다.
• 그 외의 대안: 운전 시간에 따른 펌프 교체, 설정 가능한 운전 시간에 따른 기본 부하 펌프의 주기적 펌프 교체

자동 펌프 시험 운전(주기적 펌프 작동)

• 활성화 가능
• 2회의 펌프 시험 운전 사이 시간 자유롭게 프로그래밍 가능

표준 준수

• 기계의 전기 장비 EN 60204-1
• 저전압 스위치 기어 조합 EN 61439-1 및 -2
• 산업 지역의 전자파 적합성 내성 EN 61000-6-2
• 주거, 상업 지역 및 영세업의 전자파 적합성 장해 EN 61000-6-3(SC-FC에서는 최대 7.5kW까지만, 그 이상은 EN 61000-6-4 산업 지역 전자파 장해)

BMS 및 버스 시스템에 연결하기 위한 모듈 및 옵션 모듈의 추가 비용(출고 시 장착 또는 추후 기술적 확인 후 장착):

• H-0-A(수동-정지-자동) 스위치: 모든 펌프의 작동 모드 사전 선택 및 컨트롤러 장애 시 "수동"(비상/테스트 모드, 모터 보호 기능 있음), "O"(펌프 꺼짐 – 컨트롤을 통해 켤 수 없음) 및 "자동"(컨트롤을 통해 펌프의 자동 모드 승인됨) 수동 운전.
• PTC용 분석 릴레이
• 개별 운전 및 고장 신호
• 0/2-10V에서 0/4-20mA로 변환하는 컨버터
• 피크 부하 펌프용 소프트 시동
• VDI 3814에 따른 BMS 시스템에 연결
• 버스 시스템: BACnet, LON, Modbus RTU

제품 구성

• 스위치 기어
• 설치 및 사용 설명서
• 배선도

Dualband-Rundstrahlantenne mit FME-Buchse zur Montage am Schaltschrank. Zubehör für die Schaltgeräte Control SC.../SCe.../CC.../CCe... in Verbindung mit GSM/GPRS-Modul.

Additional module for equipping the Wilo-CC/CCe-HVAC system switchgear series for outputting individual operation and fault signals via potential-free relay contacts (changeover contacts) such as:

• Operation pumps 1-2
• Operation frequency converter
• Malfunction pump 1-2
• Malfunction frequency converter
• Frost message (version HVAC)
• Low water (water supply)

in conjunction with the base module GLT and the connection cable signalling modules.

Version: Relay module with operating status LED's, secured on 35 mm DIN rail

Scope of delivery

• 1 signalling module
• 2 support bases
• 2 spacers
• 1 DIN rail
• 2 M4x10 screws