Wilo-Initial Drain | Wilo

Wilo-Initial Drain

Wilo-Initial Drain

Vaše výhody

Snadná instalace v úzkých šachtách díky kompaktní konstrukci a nízké hmotnosti
Spolehlivý provoz díky automatickému hlídání motoru
Jednoduchý provoz díky namontovanému plovákovému spínači

Doporučené služby

Konstrukční typ

Submersible pump for fully automatic operation in portable wet well installation.

Kapaliny

For the pumping in domestic areas of wastewater with small amounts of sand and gravel.

Vybavení/funkce

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Typový klíč

Example	Wilo-Initial DRAIN 10-7/522/AEF-10M
Initial	Series
Drain	Wastewater pump
10	Nominal flow in m³/h
7	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10 M	Cable length

Technické údaje

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Materiály

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Konstrukce

Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Rozsah dodávky

Pump
Hose connection Ø 24/32 mm, enclosed
Installation and operating instructions

Návod k montáži a obsluze