Rexa BLOC-V06.22-140DAH132S2
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 2 bar |
| Free ball passage of the hydraulics | 65 mm |
| Hydraulics type | Vortex impeller |
| Max. fluid temperature Tmax | 70 °C |
| Min. fluid temperature Tmin | 3 °C |
| Min. ambient temperature Tmin | -20 °C |
| Max. ambient temperature Tmax | 40 °C |
| Motor data | |
|---|---|
| Motor design | TEFC |
| Mains connection | 3~400 V, 50 Hz |
| Motor efficiency class | IE3 |
| Voltage tolerance | ±10 % |
| Power factor cos φ100 | 0.86 |
| Rated power P2 | 7.5 kW |
| Power consumption P1 max | 8.40 kW |
| Rated current IN | 14.2 A |
| Starting current I | 40 A |
| Number of poles | 2 |
| Rated speed n | 2936 1/min |
| Max. switching frequency t | 10 1/h |
| Activation type | Star-Delta (YΔ) |
| Insulation class | F |
| Protection class | IP55 |
| Equipment/function | |
|---|---|
| Motor protection | 3 PTC-150° |
| Sealing chamber, leakage detection | no |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Shaft seal | Q1Q1VGG |
| Gasket material | FKM |
| Motor housing | Grey cast iron |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | DN 65 |
| Pipe connection on the discharge side DNd | DN 65 |
Wilo-RexaBloc V06.22.../132S
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Rexa BLOC-V06.22-140DAH132S2 |
| Article number | 6098529 |
| EAN number | 4062679392011 |
| Colour | Green |
| Minimum order quantity | 1 |
| Date of sales availability | 2024-09-01 |
| Packaging | |
|---|---|
| Packaging type | Box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 800 mm |
| Length L | 729 mm |
| Height with packaging | 850 mm |
| Height H | 380 mm |
| Width with packaging | 600 mm |
| Width W | 374 mm |
| Gross weight, approx. m | 127 kg |
| Net weight, approx. m | 110 kg |
Sewage pump in block design with fitted standard motor for the stationary dry well installation in continuous operation. For pumping in commercial areas of:
- Untreated sewage
- Sewage containing faeces
- Wastewater
Hydraulic system with axial suction ports, radial discharge ports and bearing brackets as a single unit. The connections are configured as flange connections. Bearing bracket with sealing and leakage chamber for admission of fluid ingress via the seal. Fluid-side and motor-side sealing via a bidirectional mechanical seal. The sealing chamber is filled with medical white oil, the leakage chamber is empty and shut up to the motor. IEC standard motor in B5 design as three-phase motor with motor efficiency class IE3.
| Operating Data |
|---|
| Product data | |
|---|---|
| Hydraulics type | Vortex impeller |
| Free ball passage of the hydraulics | 65 mm |
| Maximum operating pressure PN | 2 bar |
| Fluid temperature T | 3 °C |
| Ambient temperature T | -20 °C |
| Motor data | |
|---|---|
| Motor design | TEFC |
| Motor efficiency class | IE3 |
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Power factor cos φ100 | 0.86 |
| Rated power P2 | 7.5 kW |
| Power consumption P1 max | 8.40 kW |
| Rated current IN | 14.2 A |
| Starting current I | 40 A |
| Activation type | Star-Delta (YΔ) |
| Number of poles | 2 |
| Rated speed n | 2936 1/min |
| Max. switching frequency t | 10 1/h |
| Insulation class | F |
| Protection class | IP55 |
| Equipment/function | |
|---|---|
| Motor protection | 3 PTC-150° |
| Sealing chamber, leakage detection | no |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Shaft seal | Q1Q1VGG |
| Gasket material | FKM |
| Motor housing | Grey cast iron |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | DN 65 |
| Pipe connection on the discharge side DNd | DN 65 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Rexa BLOC-V06.22-140DAH132S2 |
| Net weight, approx. m | 110 kg |
| Article number | 6098529 |
Installation and operating instructions
Wilo-Rexa BLOC
| Article Number | 6078738 |
| Edition | 2022-10 |
| Number of pages | 32 |
| Language | en |
PDF (8 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (327 KB)Level control with float switch (3) | |||
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF" When used in potentially explosive areas an Ex cut-off relay must be provided for the connection! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Level control with level sensor (11) | |||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-1.0 mWC with 30 m cable | 6088841 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-1.0 mWC with 50 m cable | 6088840 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWC with 10 m cable | 6088839 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWC with 30 m cable | 6088837 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Cable clamp for fastening a signal transmitter in the pump chamber. The clamp is fixed in the pump chamber with a hook; the cable of the signal transmitter is clamped and fixed via the intrinsic weight of the signal transmitter. | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Level control with dynamic pressure system (6) | |||
Small compressor for continuous or periodic aeration of the velocity head bell, including non-return valve, 3 m hose and T-connector. | |||
Dynamic pressure bell for recording the hydrostatic pressure for fluids that contain faeces. The pressure transducer measures the level in the pump chamber through changes in pressure in the fluid. These pressure changes are forwarded to the switchgear through a sealed hose and evaluated by measuring elements. Because the dynamic pressure bell is open in the direction of the fluid (open dynamic pressure system), the dynamic pressure bell must be aerated after each drainage pumping sequence. Accordingly, the switchgear must have an adjustable run-on time (OFF according to time). If aeration of the dynamic pressure bell is not ensured, then the dynamic pressure bell must be aerated either continuously or periodically (OFF according to level) using a compressor (bubbling-through system, can be ordered as an option). Use in potentially explosive areas permitted. | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Mains-independent alarm signal (4) | |||
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF" When used in potentially explosive areas an Ex cut-off relay must be provided for the connection! | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Stationary dry well installation DN 65 (4) | |||
Y-piece to combine two discharge lines into a common discharge line for double-pump systems; includes two installation accessory kits. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 400 kg, 5 m | 6063136 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Fittings (2) | |||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Installation/setup (11) | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 400 kg, 5 m | 6063136 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 400 kg, 6 m | 6063137 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 400 kg, 10 m | 6063138 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 800 kg, 3 m | 6063143 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 800 kg, 5 m | 6063144 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 800 kg, 6 m | 6063145 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 800 kg, 10 m | 6063146 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 2000 kg, 10 m | 6063151 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 5000 kg, 10 m | 6063153 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Pipes/pipe joints (1) | |||
Y-piece to combine two discharge lines into a common discharge line for double-pump systems; includes two installation accessory kits. | |||
Pump control (1) | |||
A stand-alone frequency converter for fixed-speed pumps that are operated in variable applications, especially for heating, air conditioning and pressure boosting. Special features/product advantages
Options
Scope of delivery
| |||
Pump control/accessories (4) | |||
Output filter for Wilo-EFC | |||
17 A sin IP00 Wilo-EFC filter | 6084578 | ||
Output filter for Wilo-EFC | |||
Output filter for Wilo-EFC | |||
Output filter for Wilo-EFC | |||
Alarm signal (7) | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Alarm switchgear for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Flash light 24 VDC | 2551612 | ||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Level control (22) | |||
Dynamic pressure bell for recording the hydrostatic pressure for fluids that contain faeces. The pressure transducer measures the level in the pump chamber through changes in pressure in the fluid. These pressure changes are forwarded to the switchgear through a sealed hose and evaluated by measuring elements. Because the dynamic pressure bell is open in the direction of the fluid (open dynamic pressure system), the dynamic pressure bell must be aerated after each drainage pumping sequence. Accordingly, the switchgear must have an adjustable run-on time (OFF according to time). If aeration of the dynamic pressure bell is not ensured, then the dynamic pressure bell must be aerated either continuously or periodically (OFF according to level) using a compressor (bubbling-through system, can be ordered as an option). Use in potentially explosive areas permitted. | |||
Small compressor for continuous or periodic aeration of the velocity head bell, including non-return valve, 3 m hose and T-connector. | |||
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF" When used in potentially explosive areas an Ex cut-off relay must be provided for the connection! | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 10 m cable | 503211893 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 20 m cable | 2004431 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 30 m cable | 2004432 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 5 m cable | 6082806 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 10 m cable | 6082807 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 (PSN-X) with 20 m cable | 6088843 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
Float switch WA65 (PSN-X) with 10 m cable | 6088844 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-10 mWC with 30 m cable | 6088832 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-10 mWC with 20 m cable | 6088833 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWC with 50 m cable | 6088836 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWC with 30 m cable | 6088837 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWC, cable length: 20 m | 6088838 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWC with 10 m cable | 6088839 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-1.0 mWC with 50 m cable | 6088840 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-1.0 mWC with 30 m cable | 6088841 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level control/accessories (2) | |||
Cable clamp for fastening a signal transmitter in the pump chamber. The clamp is fixed in the pump chamber with a hook; the cable of the signal transmitter is clamped and fixed via the intrinsic weight of the signal transmitter. | |||
Small compressor for continuous or periodic aeration of the velocity head bell, including non-return valve, 3 m hose and T-connector. | |||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
 Commissioning | Commissioning Drainage pumps | 2219491 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||
 Wilo-Live Assistant | Wilo-Live Assistant Service | 2216415 | |
The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems! The Wilo-Live Assistant includes:
| |||
 Maintenance | Maintenance BASIC Drainage pumps | 2219540 | |
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance COMFORT Drainage pumps | 2219514 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance PREMIUM Drainage pumps | 2219567 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
More suitable services | |||
 Service packages | Service Package L Drainage pumps | 2219719 | |
The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services. The Wilo-Service package L includes:
Optional add-on services:
| |||
Service Package M Drainage pumps | 2219690 | ||
The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services. The Wilo-Service package M includes:
Optional add-on services:
| |||
Service Package S Drainage pumps | 2219661 | ||
The Wilo service offers predefined service packages in three sizes to make it easier to combine individual services. The Wilo-Service package S includes:
Optional add-on services:
| |||
 Extended Warranty | Extended Warranty Drainage pumps | 2219465 | |
In combination of a new pump or system Wilo offers an extended warranty of up to five years in combination with commissioning and maintenance by the Wilo Service. Extended warranty includes:
| |||
 Supervision | Supervision Drainage pumps | 2219348 | |
Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project. Supervision includes:
| |||
 Installation | Installation Drainage pumps | 2219383 | |
The Wilo service offers installation of our pumps or pumping systems. We offer an end-to-end process from gathering information on site to installing our product in the overall plant. An optimal installation set-up and the interaction of various individual factors lay the foundation for long-term operational safety. Installation includes:
| |||
 System Optimisation | System Optimisation Drainage pumps | 2219278 | |
The Wilo Service offers proactive system optimisation by optimising settings and doing minor adjustments to ensure operational reliability. System Optimisation includes among others:
| |||
 Energy Solutions | Energy Solutions Drainage pumps | 2219313 | |
Wilo Service offers a proactive support to point out possible energy savings. Our service creates an overview of all installed assets to show how the energy consumption of pumps or systems can be reduced. We offer targeted consultancy and analysis, including the involvement of subsidies as well as comprehensive support around the changeover to high-efficiency technologies. Wilo-Energy solution includes:
| |||
 Repair | Repair Drainage pumps | 2219632 | |
Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system. Repair includes:
| |||