Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Centrum DV608 | Wilo
  1. Products
  2. Products
  3. Wilo-Centrum
  4. Centrum DV608

Centrum DV608

Article number : 29993236
Technical data
Hydraulic data
Max. operating pressure p 25 bar
Pipe connection on the discharge side DNd R 2
Pipe connection on the suction side DNs R 2
Number of stages -
Number of standby pumps 0
Number of operating pumps 2
Min. fluid temperature Tmin 3 °C
Max. fluid temperature Tmax 50 °C
Min. ambient temperature Tmin 5 °C
Max. ambient temperature Tmax 40 °C
Control panel
Rated voltage U 230 V
Mains frequency f 50 Hz
Protection class switchgear IP55
Motor data
Insulation class F
Protection class IP55
Rated power P2 1,5 kW
Motor efficiency 50% ηM 50% 80,9 %
Motor efficiency 75% ηM 75% 83,8 %
Motor efficiency 100% ηM 100% 84,2 %
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Mechanical seal U3BE3GG
Gasket material EPDM

Centrum DV Dimension Drawing

Dimensions H 980 mm
Dimensions H1 140 mm
Dimensions L1 300 mm
Dimensions P 830 mm
Dimensions p1 520 mm
Dimensions P3 300 mm
Pipe connection on the suction side DNs DN 32
Pipe connection on the discharge side DNd DN 32
Dimensions HS 196 mm
Dimensions LS 262 mm
Motor diameter X 132 mm
Dimensions H2 590 mm
Dimensions L 600 mm

Centrum DV Mains Connection

Centrum DV BMS Connection

Product data
Brand Wilo
Product description Centrum DV608
Article number 29993236
EAN number -
Colour green/silver
Minimum order quantity 1
Date of sales availability 2020-09-01
Packaging
Packaging type Euro pallet
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 800 mm
Length L 600 mm
Height with packaging 1130 mm
Height H 980 mm
Width with packaging 1200 mm
Width W 830 mm
Gross weight, approx. m 119 kg
Net weight, approx. m 104 kg
Tender text

Fully packaged pressure booster set consisting of: 1 to 3 Helix V non self-priming horizontal stainless steel high pressure centrifugal pumps. Each pump has a 1/4 turn ball valve on suction and a 1/4 turn ball valve and a non return valve on discharge. The discharge manifold is equipped with an 8L diaphragm pressure vessel with through-flow fitting to DN 4807, pressure gauge, air vent. Low Pressure/Level Cut Out Pressure Switch (15-250mBar), optional on the suction manifold.

The Wilo-ElectronicControl starts the pump in automatic mode when the system pressure falls below the set pressure by more than the set pressure difference. Once the system pressure has reached the set pressure, the Wilo-ElectronicControl stops the pump after a time interval that has been previously set.

The Wilo ElectronicControl protects the pump against

- Dry run

- Excess current

- Excess water temperature

- Frost

- Short-circuit

- Overvoltage

- Undervoltage

All mounted on a galvanised base frame with anti-vibration mounts.

Operating Data
Number of pumps 2
Fluid temperature T 3 °C
Ambient temperature T 5 °C
Maximum operating pressure PN 10 bar
Maximum inlet pressure p inl 10 bar
Control panel
Mains frequency f 50 Hz
Phase 1
Rated voltage U 230 V
Protection class switchgear IP55
Motor data
Rated power P2 1,5 kW
Rated voltage U 230 V
Rated current IN 5,2 A
Rated speed n 2900 1/min
Insulation class F
Protection class motor IP55
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Shaft seal U3BE3GG
Gasket material EPDM
Pipework material Stainless steel
Installation dimensions
Pipe connection on the suction side DNs R 2
Pipe connection on the discharge side DNd R 2
Ordering information
Brand Wilo
Product description Centrum DV608
Net weight, approx. m 104 kg
Article number 29993236
Documents

Installation and operating instructions

Centrum...V

Article Number CD_TE062
Edition 2020-11
Number of pages 16
Language en
PDF (2 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (271 KB)