Centrum TV1004
Hydraulic data | |
---|---|
Max. operating pressure p | 16 bar |
Pipe connection on the discharge side DNd | R 2½ |
Pipe connection on the suction side DNs | R 2½ |
Number of stages | - |
Number of standby pumps | 0 |
Number of operating pumps | 3 |
Min. fluid temperature Tmin | 3 °C |
Max. fluid temperature Tmax | 50 °C |
Min. ambient temperature Tmin | 5 °C |
Max. ambient temperature Tmax | 40 °C |
Control panel | |
---|---|
Rated voltage U | 230 V |
Mains frequency f | 50 Hz |
Protection class switchgear | IP55 |
Motor data | |
---|---|
Insulation class | F |
Protection class | IP55 |
Rated power P2 | 1.5 kW |
Motor efficiency 50% ηM 50% | 80.9 % |
Motor efficiency 75% ηM 75% | 83.8 % |
Motor efficiency 100% ηM 100% | 84.2 % |
Materials | |
---|---|
Pump housing | Stainless steel |
Impeller | Stainless steel |
Shaft | Stainless steel |
Mechanical seal | Q1BE3GG |
Gasket material | EPDM |
Centrum TV Dimension Drawing
Dimensions H | 1040 mm |
Dimensions H1 | 165 mm |
Dimensions L1 | 300 mm |
Dimensions P | 830 mm |
Dimensions p1 | 550 mm |
Dimensions P3 | 450 mm |
Pipe connection on the suction side DNs | G 1½ |
Pipe connection on the discharge side DNd | G 1½ |
Dimensions HS | 196 mm |
Dimensions LS | 262 mm |
Motor diameter X | 132 mm |
Dimensions H2 | 640 mm |
Dimensions L | 900 mm |
Centrum TV Mains Connection
Centrum TV BMS Connection
Product data | |
---|---|
Brand | Wilo |
Product description | Centrum TV1004 |
Article number | 29993243 |
EAN number | - |
Colour | green/silver |
Minimum order quantity | 1 |
Date of sales availability | 2020-09-01 |
Packaging | |
---|---|
Packaging type | Euro pallet |
Packaging property | Transport packaging |
Pieces per pallet | 1 |
Number per layer | 1 |
Dimension, weight | |
---|---|
Length with packaging | 1000 mm |
Length L | 900 mm |
Height with packaging | 1190 mm |
Height H | 1040 mm |
Width with packaging | 1200 mm |
Width W | 830 mm |
Gross weight, approx. m | 172 kg |
Net weight, approx. m | 157 kg |
Fully packaged pressure booster set consisting of: 1 to 3 Helix V non self-priming horizontal stainless steel high pressure centrifugal pumps. Each pump has a 1/4 turn ball valve on suction and a 1/4 turn ball valve and a non return valve on discharge. The discharge manifold is equipped with an 8L diaphragm pressure vessel with through-flow fitting to DN 4807, pressure gauge, air vent. Low Pressure/Level Cut Out Pressure Switch (15-250mBar), optional on the suction manifold.
The Wilo-ElectronicControl starts the pump in automatic mode when the system pressure falls below the set pressure by more than the set pressure difference. Once the system pressure has reached the set pressure, the Wilo-ElectronicControl stops the pump after a time interval that has been previously set.
The Wilo ElectronicControl protects the pump against
- Dry run
- Excess current
- Excess water temperature
- Frost
- Short-circuit
- Overvoltage
- Undervoltage
All mounted on a galvanised base frame with anti-vibration mounts.
Operating Data | |
---|---|
Number of pumps | 3 |
Fluid temperature T | 3 °C |
Ambient temperature T | 5 °C |
Maximum operating pressure PN | 10 bar |
Maximum inlet pressure p inl | 10 bar |
Control panel | |
---|---|
Mains frequency f | 50 Hz |
Phase | 1 |
Rated voltage U | 230 V |
Protection class switchgear | IP55 |
Motor data | |
---|---|
Rated power P2 | 1.5 kW |
Rated voltage U | 230 V |
Rated current IN | 5.2 A |
Rated speed n | 2900 1/min |
Insulation class | F |
Protection class motor | IP55 |
Materials | |
---|---|
Pump housing | Stainless steel |
Impeller | Stainless steel |
Shaft | Stainless steel |
Shaft seal | Q1BE3GG |
Gasket material | EPDM |
Pipework material | Stainless steel |
Installation dimensions | |
---|---|
Pipe connection on the suction side DNs | R 2½ |
Pipe connection on the discharge side DNd | R 2½ |
Ordering information | |
---|---|
Brand | Wilo |
Product description | Centrum TV1004 |
Net weight, approx. m | 157 kg |
Article number | 29993243 |