Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Centrum TV1006 | Wilo

Centrum TV1006

Article number: 29993244
Technical data
Hydraulic data
Max. operating pressure p 25 bar
Pipe connection on the discharge side DNd R 2½
Pipe connection on the suction side DNs R 2½
Number of stages -
Number of standby pumps 0
Number of operating pumps 3
Min. fluid temperature Tmin 3 °C
Max. fluid temperature Tmax 50 °C
Min. ambient temperature Tmin 5 °C
Max. ambient temperature Tmax 40 °C
Control panel
Rated voltage U 230 V
Mains frequency f 50 Hz
Protection class switchgear IP55
Motor data
Insulation class F
Protection class IP55
Rated power P2 2.2 kW
Motor efficiency 50% ηM 50% 84.8 %
Motor efficiency 75% ηM 75% 86.2 %
Motor efficiency 100% ηM 100% 85.9 %
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Mechanical seal U3BE3GG
Gasket material EPDM

Centrum TV Dimension Drawing

Dimensions H 1040 mm
Dimensions H1 165 mm
Dimensions L1 300 mm
Dimensions P 830 mm
Dimensions p1 550 mm
Dimensions P3 450 mm
Pipe connection on the suction side DNs DN 40
Pipe connection on the discharge side DNd DN 40
Dimensions HS 196 mm
Dimensions LS 262 mm
Motor diameter X 132 mm
Dimensions H2 640 mm
Dimensions L 900 mm

Centrum TV Mains Connection


Centrum TV BMS Connection

Product data
Brand Wilo
Product description Centrum TV1006
Article number 29993244
EAN number -
Colour green/silver
Minimum order quantity 1
Date of sales availability 2020-09-01
Packaging
Packaging type Euro pallet
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 1000 mm
Length L 900 mm
Height with packaging 1190 mm
Height H 1040 mm
Width with packaging 1200 mm
Width W 830 mm
Gross weight, approx. m 181 kg
Net weight, approx. m 166 kg
Tender text

Fully packaged pressure booster set consisting of: 1 to 3 Helix V non self-priming horizontal stainless steel high pressure centrifugal pumps. Each pump has a 1/4 turn ball valve on suction and a 1/4 turn ball valve and a non return valve on discharge. The discharge manifold is equipped with an 8L diaphragm pressure vessel with through-flow fitting to DN 4807, pressure gauge, air vent. Low Pressure/Level Cut Out Pressure Switch (15-250mBar), optional on the suction manifold.

The Wilo-ElectronicControl starts the pump in automatic mode when the system pressure falls below the set pressure by more than the set pressure difference. Once the system pressure has reached the set pressure, the Wilo-ElectronicControl stops the pump after a time interval that has been previously set.

The Wilo ElectronicControl protects the pump against

- Dry run

- Excess current

- Excess water temperature

- Frost

- Short-circuit

- Overvoltage

- Undervoltage

All mounted on a galvanised base frame with anti-vibration mounts.

Operating Data
Number of pumps 3
Fluid temperature T 3 °C
Ambient temperature T 5 °C
Maximum operating pressure PN 10 bar
Maximum inlet pressure p inl 10 bar
Control panel
Mains frequency f 50 Hz
Phase 1
Rated voltage U 230 V
Protection class switchgear IP55
Motor data
Rated power P2 2.2 kW
Rated voltage U 230 V
Rated current IN 7.4 A
Rated speed n 2900 1/min
Insulation class F
Protection class motor IP55
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Shaft seal U3BE3GG
Gasket material EPDM
Pipework material Stainless steel
Installation dimensions
Pipe connection on the suction side DNs R 2½
Pipe connection on the discharge side DNd R 2½
Ordering information
Brand Wilo
Product description Centrum TV1006
Net weight, approx. m 166 kg
Article number 29993244
Documents

Installation and operating instructions

Centrum...V

Article Number CD_TE062
Edition 2020-11
Number of pages 16
Language en
PDF (2 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (327 KB)