Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
P260 | Wilo
Datos técnicos
Datos técnicos
Alimentación eléctrica 1~230 V, 50 Hz
Potencia nominal P2 P2 500 W
Control sin convertidor de frecuencia
Tipo de arranque Directo online (DOL)
Compatibilidad electromagnética EN 61000
Norma de conexión EN 1254
Instalación Instalación en el suelo
Datos de funcionamiento
Presión de entrada máx. 8 bar
Dimensiones
Dimensiones H1 775,0 mm
Dimensiones H2 730,0 mm
Dimensiones H3 225,0 mm
Dimensions H4 545,0 mm
Dimensions H5 590,0 mm
Dimensiones L 455,0 mm

Pressurisation Unit Wiring Diagram

Datos del producto
Marca Wilo
Denominación del producto P260
Referencia 2819496
Número EAN 5013608000629
Color verde/plata/gris
Cantidad mínima de pedido 1
Disponibilidad en el mercado 2012-06-01
Embalaje
Tipo de embalaje Europalé
Propiedades del embalaje Embalaje de transporte
Número por palé 4
Número por capa 4
Medidas y pesos
Longitud con embalaje 1000 mm
Longitud L 455 mm
Altura con embalaje 925 mm
Altura H 775 mm
Ancho con embalaje 800 mm
Ancho W 350 mm
Peso bruto aproximado m 50 kg
Peso neto aproximado m 35 kg
Texto de especificación

The Wilo Comfort twin pump pressurisation units (duty / standby) are designed for use on heating or chilled water systems up to and including 3.5, 6.0 and 8.0 bar cold fill pressures.

The unit is fitted with an 18 litre polypropylene break tank c/w type AB air gap to BS13077:2008 and water regulations 1999, Wras approved equilibrium ball float valve to BS1212 and a low water float switch and strainers for pump protection.

Each pump is fitted with a non return valve and quick release couplings for ease of maintenance. The pressure transducer monitors the system pressure and feeds a 0-10v signal to the comfort controller.

Comfort Controller is complete with the following features:

  • User friendly interface that has a 2 line LCD backlight display
  • Healthy / fail LED
  • Password protection
  • System Fill for initial fill of system
  • Pump check routine, that runs both pumps for 2 seconds if inactive for 7-90 days
  • Pump trip and fail alarms
  • System leak alarm
  • Excessive starts alarm
  • Alarm log
  • Hours Run
  • Automatic duty rotation
  • Connectivity: BACnet = RS485 interface, BACnet MS/TP protocol

2 wire BACnet

Volt Free Contacts are supplied with terminals for common, normally open and normally closed.

(5A, 230V)

Pump no.1 trip, Pump no. 1 run, Pump no.2 trip, Pump no. 2 run, High Pressure, Low Pressure, Excess starts, Low water and Boiler Interlock (NC only)

(10A, 230V)

To be selected from Power fail, Common alarm, Common pressure alarm

Standards Applied:

Low Voltage and Machinery Directive 2006/42/EC, EMC Directive EMC 2004/108/EC, BSEN809, BS7074-1 to 3, BS13077:2008 and water regulations 1999.

Datos técnicos
Alimentación eléctrica 1~230 V, 50 Hz
Control sin convertidor de frecuencia
Datos de funcionamiento
Presión de entrada máx. 8 bar
Información de pedidos
Ancho W 350 mm
Documentos

Group Statement

Reglamento REACH

Edición 2021-05
Número de páginas 5
Idioma lengua neutra
PDF (271 KB)