Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
ISAR MODH1-2CH1-L-405/SCe-T260 | Wilo

ISAR MODH1-2CH1-L-405/SCe-T260

Referencia : 29993829
Datos técnicos
Datos hidráulicos
Presión de entrada p inl 6 bar
Presión máxima de trabajo PN 10 bar
Conexión de tubería del lado de impulsión DNd R 1¼
Conexión de tubería del lado de aspiración DNs R 1¼
Número de bombas 2
Número de etapas -
Número de bombas de reserva 1
Número de bombas de funcionamiento 1
Temperatura mínima del fluido Tmin 3 °C
Temperatura máxima del fluido Tmax 60 °C
Temperatura ambiente mínima Tmin 5 °C
Temperatura ambiente máxima Tmax 40 °C
Datos del motor
Alimentación eléctrica 3~400 V, 50 Hz
Tolerancia de tensión ±10 %
Potencia nominal del motor P2 0,75 kW
Intensidad nominal IN 1,9 A
Velocidad nominal n 2900 1/min
Clase de aislamiento F
Tipo de protección IP55
Rendimiento del motor 50% ηM 50% 75,6 %
Rendimiento del motor 75% ηM 75% 79,6 %
Rendimiento del motor 100% ηM 100% 80,7 %
Materiales
Carcasa de la bomba Acero inoxidable
Rodete Acero inoxidable
Eje Acero inoxidable
Cierre mecánico BQ1E3GG
Material de la junta EPDM
Material de la tubería Acero inoxidable

COR 2MHI.../SCe-EM-T260 Dimensions

Dimensiones H 1540 mm
Dimensiones H1 90 mm
Dimensiones H2 359 mm
Dimensiones L1 250 mm
Dimensiones P 1270 mm
Dimensiones P1 0 mm
Dimensiones HS 400 mm
Dimensiones LS 600 mm
Conexión de tubería del lado de impulsión DNd R 1¼
Conexión de tubería del lado de impulsión DNd PN 10
Conexión de tubería del lado de aspiración DNs R 1¼
Conexión de tubería del lado de aspiración DNs PN 10
Dimensiones L 600 mm
Dimensiones TS 210 mm

3~ 400 V, 50 Hz, 3~ 380-460 V, 60 Hz

Datos del producto
Marca Wilo
Denominación del producto ISAR MODH1-2CH1-L-405/SCe-T260
Referencia 29993829
Número EAN -
Color verde/negro/plata
Cantidad mínima de pedido 1
Disponibilidad en el mercado 2021-07-01
Embalaje
Tipo de embalaje Palé desechable
Propiedades del embalaje Embalaje de transporte
Número por palé 1
Número por capa 1
Medidas y pesos
Longitud con embalaje 1270 mm
Longitud L 1270 mm
Altura con embalaje 1690 mm
Altura H 1540 mm
Ancho con embalaje 800 mm
Ancho W 600 mm
Peso bruto aproximado m 103 kg
Peso neto aproximado m 88 kg
Texto de especificación

Compact pressure boosting system according to DIN 1988 and DIN EN 806, for indirect connection. Consisting of non self-priming, switched in parallel, horizontal stainless steel high-pressure multistage centrifugal pumps. Ready for connection to mains water supply via 260 litre Reg 4 approved fibreglass tank with stainless steel pipework, mounted on a base frame, including control device with all necessary measurement and adjustment equipment.

For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems.

For pumping drinking water, process water, cooling water or other service water, which does not affect the materials used, neither chemically nor mechanically, and does not contain any abrasive or long-fibre constituents. The ISAR booster is fully compliant to The Water Supply (Water Fittings) Regulations 1999 (Regulation 4) and is suitable for safe drinking water applications

Special features/product benefits

  • High operational reliability, thanks to system with one, two or three horizontal multistage CH1-L pumps with stainless steel hydraulics
  • Easy installation and maintenance thanks to special, flexibly adjustable connections to manifolds
  • Easy commissioning and operation with the Smart Controller
  • Drinking water approval (reg 4) for pumps with components made of stainless steel that come into contact with the fluid
  • 260 litre WRAS approved fibreglass tank with a removeable AB air gap lid, 3/4" inlet equilibrium ball valve, overflow and drain connections.

Equipment/function

  • 2 CH1-L pumps per system
  • Components that come in contact with the fluid are corrosion-resistant
  • Electrogalvanized base frame with height-adjustable vibration absorbers for insulation against structure-borne noise
  • Stop valve on every pump on the suction and discharge sides
  • Non-return valve, pressure side
  • Pressure sensor, on the discharge side
  • Low level float switch installed inside the tank.
  • Pressure gauge, discharge side
  • Diaphragm pressure vessel (8 l/PN 10)
  • SCe comfort control device, maximum degree of control performance with symbol-based LCD display, simple navigation with clear menu and Green Button Technology for setting parameters for controlling the electronic pumps with frequency converters
  • Ready for integration into building automation with the SCe switchgear via standard Modbus RTU

Operation / display

  • LC display (backlit) for display of the operating data, controller parameters, operating statuses of the pumps, error messages and history memory
  • Menu navigation with symbols and menu numbers
  • LEDs for display of the system status (operation/fault)
  • Factory-preset parameters for easy commissioning/start
  • Setting of operating parameters and acknowledgement of fault messages using Green Button Technology
  • Lockable main switch
  • Operation with/without standby pump selectable by customer service
  • Elapsed time indicator for each pump and for entire system
  • Switching cycle counter for each pump and for entire system
  • Fault memory for the last 16 faults

Monitoring

  • Actual value of the system is output via a 0 – 10 volt analogue signal for external measurement/display applications, 10 volts correspond to the final sensor value
  • 4 – 20 mA sensor signal (conductivity test of the sensor cable) for control variable actual value
  • The pump mains power feed is protected via the circuit breaker
  • Automatic switchover to standby pump in the event of an operating pump fault
  • Monitoring of maximum and minimum system values with adjustable time delays and limits
  • Zero-flow test for switching off the system when no water is being drawn off (adjustable parameters)
  • Pipe filling function for filling empty pipes (initial filling of the consumer network)
  • Protection against low water level via contact, e.g. for float switch or pressure switch
  • Automatic shutdown of pumps if fault occurs or operation at preset emergency operation speed

Interfaces

  • Potential-free contacts for SBM/SSM collective operation and collective fault signals
  • Logic reversal can be applied to SBM and SSM
  • Contacts for external on/off, low water and second setpoint
  • External on/off via contact for deactivation of the system's automatic mode
Datos de funcionamiento
Altura máxima de impulsión Hmax 48,8 m
Número de bombas 2
Temperatura del fluido T 3 °C
temperatura ambiente T 5 °C
Presión máxima de trabajo PN 10 bar
Presión de entrada p inl 6 bar
Control
Frecuencia de la red f 50 Hz
Fase 1
Tensión asignada U 220-230 V
Tipo de protección del cuadro IP54
Datos del motor
Potencia nominal del motor P2 0,75 kW
Tensión asignada U 230 V
Intensidad nominal IN 3,4 A
Velocidad nominal n 2900 1/min
Tipo de arranque Convertidor de frecuencia (FC)
Rendimiento del motor 50% ηM 50% 75,6 %
Rendimiento del motor 75% ηM 75% 79,6 %
Rendimiento del motor 100% ηM 100% 80,7 %
Clase de aislamiento F
Tipo de protección del motor IP55
Materiales
Material del depósito PUR-GFRP
Carcasa de la bomba Acero inoxidable
Rodete Acero inoxidable
Eje Acero inoxidable
Junta del eje BQ1E3GG
Material de la junta EPDM
Material de la tubería Acero inoxidable
Dimensiones de instalación
Conexión de tubería del lado de aspiración DNs R 1¼
Conexión de tubería del lado de impulsión DNd R 1¼
Conexión de rebose Ø50-PN0
Volumen bruto del depósito V 260 l
Información de pedidos
Peso neto aproximado m 88 kg
Marca Wilo
Denominación del producto ISAR MODH1-2CH1-L-405/SCe-T260
Referencia 29993829
Documentos

Group Statement

Reglamento REACH

Edición 2021-05
Número de páginas 5
Idioma lengua neutra
PDF (271 KB)