Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-FireSet | Wilo

Wilo-FireSet

用于灵活规划消防设备。

优势
全新
Wilo-FireSet符合EN 12845标准,配有电动机和开关设备

用于灵活规划消防设备。

Wilo-FireSet是一款集成至自动消防喷淋系统的可配置升压设备。模块化部件可在配置消防设备时实现最大的系统灵活性。可针对具体应用进行配置,符合国际和地方标准及准则(NFPA 20、UL、EN 12845、VdS、CNPP等)。所用Wilo水泵十分可靠,采用轴向组合式外壳或“后面拔出”结构。

结构紧凑,搭载通用底架,便于运输和安装。除坚固耐用的水泵外,开关设备和液晶显示屏还能保持运行状态的透明性并实现简单的故障诊断,从而确保高度运行可靠性。



特点/产品优势

  • 升压设备符合国际标准和准则(如NFPA 20、EN 12845),可实现最大的规划灵活性
  • 质量经过UL、VdS或CNPP认证,运行可靠性高
  • 采用模块化结构,可根据具体需求定制配置并且易于维护
  • Wilo水泵坚固耐用,采用轴向组合式外壳或“后面拔出”结构,应用领域广、使用寿命长
  • 开关设备可选配液晶显示屏和直观的菜单导航,便于操作
产品系列说明
SiFire EN

结构

Pressure-boosting system for firefighting.

Consists of 1 pump, depending on the model, with a horizontal baseplate – pump with split housing or in back-pull-out design – with spacer coupling, electric or diesel motor, and a switchgear.

应用

Fully automatic water supply for fire-fighting systems with sprinklers in domestic, commercial and public buildings, hotels, hospitals, shopping centres, office blocks and industrial buildings.

设备/功能

  • 1 pump with a horizontal baseplate – pump with split housing or in back-pull-out design – with an electric or diesel motor.
  • Flexible bolt coupling for the electric motor or universal joint for the diesel motor.
  • 1 switchgear fixed to a robust support structure. Model E for the electric motor and D for the diesel motor.
  • 2 pressure sensors for automatic starting.
  • Solid base frame with a special profile and slinging points (eyelets) for lifting accessories
  • Only in NFPA20 version: Standard-equipped with an air vent valve und pressure gauge installed directly on the main pump housing.
  • Only for the model with a diesel motor:
    • Motor cooling with water/water-heat exchanger.
    • Direct Air cooling optional (not in NFPA20 exection).
    • Fuel tank with level sensor and sufficient volume for 8 hours’ (NFPA20) or 6 hours’ operational autonomy.
    • 2 batterie sets on the baseplate and battery charging device in the switchgear.
  • Accessories on request:
    • Jockey pump
    • Jockey pump controller
    • Flow meter
    • Eccentric cone kit on the suction side
    • Concentric cone kit on the discharge side
    • Vibration damping sleeve for piping
    • Density meter for the battery
    • Spare parts kit for the diesel motor
    • Silencer (30 dBA) for the diesel motor
    • Pressure relief valve (FM approved)
    • Circulation and relief valve (FM approved)

技术数据

Permitted fluid:

  • Non-aggressive, clean water

Application:

  • Mains connection: 3~400 V, 50 Hz (1~230 V, 50 Hz for the switchgear for the diesel pump)
  • Max. fluid temperature: +25 °C (NFPA20: +30 °C)
  • Max. ambient temperature:
    • +4 °C to +40 °C (electic motor), +10 °C to +40 °C (diesel motor)
    • NFPA20: +5 °C to +25 °C (electic motor), +10 °C to +25 °C (diesel motor)
  • Max. operating pressure:
    • 16 – 25 bar, depending on the version
    • NFPA20: 200 – 355 psi
  • Max. height for the installation:
    • Diesel: 91 m
    • Electric: 1000 m
    • NFPA20: Electric: 300 m
  • Flow:
    • up to 750 m³/h
    • NFPA20: Nominal flow from 500 to 3000 gpm (113 to 681 m3/H)
  • Max. delivery head:
    • 128 m
    • NFPA20: 260 psi (179 m)

Pumps with bronze impellers:

  • Main/standby pump with a horizontally split housing or in back-pull-out design

Electric motor:

  • IEC34 UL (NFPA20) or IEC IE3/IE4 standard motors
  • Max. power: 315 kW
  • 2980 or 1480 rpm
  • IP rating: IP55

Diesel motor:

  • Direct injection or supercharged diesel motor with water cooling
  • Max. power: 336 kW
  • Forced lubrication with gear pump and oil filter
  • Heating device (optional)

Other:

  • Nominal connection diameters on the discharge side DN 32 to DN 200
  • Nominal connection diameters on the suction side DN 50 to DN 200
  • For NFPA20:
    • Nominal connection diameters on the discharge side 5 to12 inch
    • Nominal connection diameters on the suction side 5 to 12 inch
  • IP rating for the switchgear: IP54

材料

For the axial split case pump:

  • Impeller made of bronze CuSn10
  • Pump housing made of cast iron GG 30
  • Shaft made of stainless steel AISI 410
  • Shaft sleve made of stainless steel AISI 410
  • Wear rings made of bronze

For the norm pump in back-pull-out design:

  • Impeller made of bronze CuSn10 or CuAl10Fe5Ni5
  • Neck ring made of stainless steel AISI316L/1.4409
  • Pump housing made of cast iron EN-GJL-250
  • Shaft made of stainless steel AISI420/1.4021

For the jockey pump:

  • Impeller made of stainless steel AISI 304/1.4301
  • pump housing of stainless steel AISI 304/1.4301
  • Shaft made of stainless steel AISI 304/1.4301
  • O-ring-sealings of EPDM

类型

  • Base frame: Produced from epoxy-coated or optional galvanised steel profiles with brackets for the switchgear. Slinging points (eyelets) for lifting accessories pre-assembled. Special baseplate for the pump driven by the diesel motor, designed to intake large quantities of concrete (option for NFPA20 exection only), significantly reducing vibration transfer and increasing the product’s reliability and service life.
  • Pumps: 1 pump with horizontal baseplate with an electric or diesel motor. Pump with split housing or axial discharge for easy access to the inner pump components without having to dismantle the motor or piping
  • Tank: Fuel tank made from epoxy-coated steel with a strong support structure. Fully equipped with a fuel gauge, drain plugs and air vent valves.
  • Sensors and display: The pressure sensors are located next to the switchgear or mounted on the wet column and activate the pump start via the controller. The pressure gauge on the suction and pressure side (ø 63 mm) is located on the pump’s split housing (only NFPA 20 execution).
  • Control device/controller: The pump kit is standard-equipped with a switchgear for the electric or diesel motor.

出厂状态

  • Factory-set mounted pressure-boosting system (consisting of a pump, drive, coupling, base frame and switchgear), ready for connection and tested for function and impermeability
  • Automatic air vent valve (only NFPA 20 execution).
  • Pressure gauge on the suction side and on the discharge side (only NFPA 20 execution).
  • Installation and operating instructions for pressure-boosting system.
  • Installation and operating instructions for pumps
  • Installation and operating instructions for switchgear
  • Optional accessories.
文档

安装及操作说明书

Wilo-FireSet FRN Electro

物品编号 3388058
版本 2025-02
页数 28
语言 en
PDF (3 MB)

Wilo-FireSet FRN Diesel

物品编号 3388059
版本 2025-02
页数 32
语言 en
PDF (4 MB)

Wilo-Control Fire D VdS

物品编号 4248043
版本 2024-03
页数 36
语言 en
PDF (7 MB)

Wilo-Control Fire E VdS

物品编号 4248040
版本 2024-03
页数 28
语言 en
PDF (8 MB)

Group Statement

REACH 指令

版本 2021-05
页数 5
语言 对所有语言保持不变
PDF (271 KB)