65-8 | Wilo

65-8

Number of results: 3

Flow

Head / Pump pressure

Product design type	Glandless standard high-efficiency pump	Glandless premium smart-pump	Glanded standard single pump	Existing pump



Description
Product description	Yonos MAXO 50/0,5-9 PN 6/10	Stratos MAXO 50/0,5-9 PN6/10	VeroLine-IPL 40/160-0,37/4	65-8
Article number	2120650	2164588	2089555	-
Series	Wilo-Yonos MAXO	Wilo-Stratos MAXO	Wilo-VeroLine-IPL	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	3~400 V ±10%, 50 Hz	-
Port-to-port length	280 mm	280 mm	320 mm	400 mm
Pump connection	DN 50	DN 50	DN 40	-
Display	LED segment display	Graphic colour display (4.3 inches)	-	-
Comment	Change piping Check electrical connection	Change piping Check electrical connection	Change piping	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-	-
	Constant speed (3 speed stages)	-	-	-
	-	Q limit for limiting the maximum volume flow	-	-
	-	Dynamic Adapt plus	-	-
	-	ΔT-const. for constant differential temperature control	-	-
	-	T-const. for constant temperature control	-	-
	-	Constant Q for constant volume flow control	-	-
	-	Multi Flow Adaptation	-	-
	-	Δ T-const. for constant differential temperature control	-	-
	-	User-defined PID control	-	-
	-	Constant speed (n-const.)	-	-
Special features of the series	-	Heating/Cooling switching	-	-
	-	Night set back	-	-
	-	Heat quantity measurement	-	-
	-	Cooling quantity measurement	-	-
	-	Key locking function	-	-
	-	No-Flow Stop	-	-
	-	Reset function to factory setting	-	-
	-	Adjustable volume flow limiter	-	-
	-	Ability to save and restore configured pump settings (3 restoration points)	-	-
	-	Fault message and warning message in plain text including suggested remedy	-	-
Multi pump operation	Main/Standby (with Connect Module Yonos MAXO)	-	-	-
	-	Main/Standby	-	-
	-	Parallel operation	-	-
Measurement value logging	-	Heat and cooling capacity measurement	-	-
Display	Setpoint	Setpoint	-	-
	Fault signals (error codes)	-	-	-
	-	Actual delivery head	-	-
	-	Actual volume flow	-	-
	-	Actual power consumption	-	-
	-	Energy consumption	-	-
	-	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-
	-	Warning messages in plain text (display status: yellow)	-	-
	-	Error messages in plain text (display: red)	-	-
	-	Pump venting (display status: blue)	-	-
	-	Control mode	-	-
	-	Active influences (e.g. STOP)	-	-
Display (can also be selected)	-	Speed	-	-
	-	Heating quantity	-	-
	-	Cooling quantity	-	-
	-	Operating hours	-	-
	-	Mains voltage	-	-
	-	Warning message	-	-
	-	Error message	-	-
Pump venting function	-	Yes	-	-
Dry-running detection	-	yes	-	-
Equipment
Thermal insulation shell	As accessory	Yes	-	-
Cold water insulation shell	-	As accessories	-	-
Quick electrical connection	Wilo plug	Wilo Connector	-	-
Blocking-current proof motor	yes	yes	-	-
Particle filter	yes	yes	-	-
Key lock	-	yes	-	-
Fluid temperature sensor	-	Integrated	-	-
Connectivity
Analogue signal as standard	-	0-10 V	-	-
	-	2-10 V	-	-
	-	4-20 mA	-	-
	-	0-20 mA	-	-
	-	PT1000	-	-
Digital output	SSM/SBM (via accessories Connect module Yonos MAXO)	-	-	-
	-	SSM	-	-
	-	SBM	-	-
Digital input	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-	-	-
	-	Ext. OFF	-	-
	-	Ext. MIN	-	-
	-	Ext. MAX	-	-
	-	MANUAL (BMS-OFF)	-	-
	-	Key lock	-	-
	-	Switchover between heating/cooling mode	-	-
Bus communication via additional accessories	-	BACnet MS/TP	-	-
	-	LON	-	-
	-	Modbus RTU	-	-
	-	CANopen	-	-
	-	PLR	-	-
	-	BACnet IP	-	-
	-	Modbus TCP	-	-
Access via the Wilo-Assistant app	-	Yes	-	-
Connection for Wilo-Smart Cloud	-	Via Wilo-Smart Gateway	-	-
wire data exchange and remote operation	-	Bluetooth	-	-
Motor data
Phases	1	1	3	3
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	3~400 V, 50 Hz	3~400 V, 50 Hz
Energy efficiency index (EEI) %%fn=footnote%%	≤0,20	≤0,17	-	-
Min current	0,17 A	0,2 A	-	-
Max current	2,15 A	2,4 A	-	-
Rated power	400 W	456 W	370 W	-
Min. speed	950 1/min	650 1/min	-	-
Max. speed	4100 1/min	3050 1/min	-	-
Power consumption	15 W	10 W	-	-
Power consumption	490 W	550 W	-	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-	-
Insulation class	F	F	F	-
Protection class	IPX4D	IPX4D	IP55	-
Materials
Material	Grey cast iron	Grey cast iron	Grey cast iron	Grey cast iron
Impeller	PPS-GF40	PPS-GF40	PPE/PS-GF30	-
Shaft	Stainless steel	1.4028, DLC-coated	Stainless steel	-
Bearing	Carbon-graphite	Carbon, antimony-impregnated	-	-
Pipe connection
Inlet connection	DN 50	DN 50	DN 40	DN 65
PN connection on suction side	PN 6/10	PN 6/10	PN 10	PN 10
Outlet connection	DN 50	DN 50	DN 40	DN 65
PN connection on discharge side	PN 6/10	PN 6/10	PN 10	PN 10
Dimension, weight
Length with packaging	600 mm	600 mm	600 mm	-
Length	292 mm	420 mm	398 mm	-
Height with packaging	400 mm	394 mm	525 mm	-
Height	334 mm	280 mm	320 mm	-
Width with packaging	394 mm	400 mm	400 mm	-
Width	165 mm	250 mm	234 mm	-
Gross weight, approx.	16,1 kg	22,2 kg	28 kg	-
Net weight, approx.	14,2 kg	18,8 kg	23 kg	43 kg
Ordering information
Product description	Yonos MAXO 50/0,5-9 PN 6/10	Stratos MAXO 50/0,5-9 PN6/10	VeroLine-IPL 40/160-0,37/4	65-8
Brand	Wilo	Wilo	Wilo	Perfecta
EAN number	4048482235967	4048482699653	4016322990956	-
Article number	2120650	2164588	2089555	-

Data sheet

Description
Product description	65-8
Brand	Perfecta
Port-to-port length l0	400 mm
Net weight, approx. m	43 kg

Motor data
Phases	3
Mains connection	3~400 V, 50 Hz

Materials
Material	Grey cast iron

Pipe connection
Inlet connection	DN 65
PN connection on suction side	PN 10
Outlet connection	DN 65
PN connection on discharge side	PN 10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.

We have answers to your questions

Do our products and services interest you? If so, we are happy to help!

Whether you're creating a new project or adjusting service specifications, designing different types of equipment, advising on the selection of pumps and switchgear, or just helping with hydraulic and control issues.

We can help you! Please contact our service team to make an appointment.

Find the right contact for your question.