Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-DrainLift SANI-L | Wilo

Wilo-DrainLift SANI-L

The compact double pump lifting unit for apartment blocks and commercial buildings.

Your advantages
Wilo-DrainLift SANI-L

The compact double pump lifting unit for apartment blocks and commercial buildings.

With its large pump volume as well as the selectable continuous duty and intermittent periodic duty motor operating modes, the Wilo-DrainLift SANI-L compact double faeces lifting unit is the ideal solution for quiet operation in multi-residential buildings and commercial buildings with uncontrolled sewage intake. With a free ball passage of 44 mm or 65 mm, freely selectable inlets and the optional version for particularly aggressive fluids, it can be used flexibly and is easy to install. The spring-loaded non-return valve minimises the noise level at the end of each pumping cycle. Maintenance is made particularly easy by the user-friendly construction.


Your advantages

  • Compact design and low weight make installation and transport easy
  • A double-pump system, large switching volume, thermal motor protection and a mains-independent alarm ensure high operational reliability
  • Corrosion-free design with engineering plastics and stainless steel guarantees high reliability
  • Freely selectable connections for maximum installation flexibility
  • Universal use thanks to several variants with two free ball passage sizes (44/65 mm), operating mode for continuous operation or intermittent periodic duty and the version for aggressive fluids
  • A transparent tank cover and a cleaning opening in the non-return valve enable easy maintenance and cleaning
  • Spring-loaded non-return valve with a low noise level at the end of a pumping cycle for quiet operation
Series description
Wilo-DrainLift SANI-L

Design

Compact, ready for connection, and fully submersible double pump lifting unit for pumping sewage containing faeces.

Application

Pumping of sewage containing faeces:

  • In cases where sewage cannot be discharged directly into the sewer system via a natural downward slope
  • For backflow resistant drainage in cases where the discharge point is below the backflow level

Equipment/function

  • Switchgear with mains-independent alarm and collective fault signal
  • Ready-to-plug
  • Tank with inspection opening and transparent cover
  • Analogue level measurement (4 … 20 mA)
  • Non-return valve with inspection opening
  • Thermal motor monitoring with bimetallic sensor

Typekey

Example:

DrainLift SANI-L.17T/4C

DrainLift

Product family

SANI

Sewage lifting unit

L

Size

17

Max. delivery head

T

Mains connection:

  • M = 1~
  • T = 3~

4

Motor and switchgear version:

  • 1 = operating mode: S3, switchgear: Control MS-L
  • 4 = operating mode: S1, switchgear: Control EC-L

C

Version for aggressive fluids

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Operating mode: S3 10% or S1
  • Fluid temperature: 3 ... 40 °C (37 ... 104 °F), max. 65 °C (149 °F) for 5 min
  • Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F)
  • Tank volume: 122 l (32 US.liq.gal.)
  • Max. usable volume in the tank according to the inlet height*: 60 l/16 US.liq.gal. (180 mm*)/76 l/20 US.liq.gal. (250 mm*)/91 l/24 US.liq.gal. (315 mm*)
  • Discharge port: DN 80, PN 10
  • Inlet connection: DN 100/150 (110/160 mm)
  • Ventilation connection: DN 65 (75 mm)
  • Protection class of switchgear: IP54
  • Protection class of lifting unit: IP68 (2 mWG/7 d)
  • Noise level: 70 dB(A)

Materials

  • Motor housing: 1.4404 (AISI 316L)
  • Hydraulics: PP-GF30
  • Impeller: PP-GF30 or 1.4408 (AISI 316)
  • Tank: PE
  • Non-return valve: PPS

Construction

Gas- and watertight collection tank with sloped floor at an angle and an inspection opening with transparent cover.Freely selectable inlets within the marked areas.Level measurement performed with an analogue output signal 4 ... 20 mA.Discharge port attached with a non-return valve including an inspection opening.

Surface-cooled (air) or self-cooling (sheath flow cooling) motor with thermal motor monitoring.

Pre-installed switchgears for automatic operation:

Wilo-Control MS-L

  • Collective fault signal with potential-free contact
  • Integrated and mains-independent alarm
  • Adjustable follow-up time
  • 1.5 m connection cable with attached plug

Wilo-Control EC-L

  • Operation via display and icon-based, alphanumeric menu
  • Collective fault signal with potential-free contact
  • Individual fault signal with potential-free contact
  • ModBus interface
  • Integrated and mains-independent alarm
  • Adjustable follow-up time
  • 1.5 m connection cable with attached plug

Scope of delivery

  • Lifting unit with switchgear and connection cable with plug
  • Flange connector DN 80 (90 mm)/DN 100 (110 mm)
  • Collar DN 100 (110 mm) for discharge connection
  • HT double socket DN 65 (75 mm) for ventilation connection
  • HT double socket DN 40 (50 mm) for drain connection
  • Inlet set with hole saw 124 mm (5 in) and seal DN 100 (110 mm)
  • Floor fixation set
  • Noise insulation mat
  • 9 V rechargeable battery
  • Installation and operating instructions

Options

  • Version for aggressive fluids with ModBus connection
  • Version for S1 operation (continuous duty) and with ModBus connection
Documents

Installation and operating instructions

Wilo-DrainLift SANI-L

Article Number 2552854
Edition 2023-06
Number of pages 32
PDF (6 MB)

Wilo-Control MS-L

Article Number 2552612
Edition 2023-08
Number of pages 40
PDF (7 MB)

Wilo-Control EC-L

Article Number 2543252
Edition 2022-09
Number of pages 64
PDF (8 MB)

General overview

General Overview 2024 - International version

Edition 2022
Number of pages 74
PDF (33 MB)

Certification booklet

Wilo-DrainLift SANI

Article Number 6088777
Edition 2020-06
Number of pages 40
PDF (2 MB)