Wilo-SiBoost Smart Helix VE

Series description

Special features/product advantages

  • Sturdy system with stainless steel high-pressure multistage centrifugal pumps of the Helix VE series with integrated frequency converter
  • Over-proportionally wide control range from 25 Hz up to a maximum of 60 Hz
  • Pressure-loss optimised entire system
  • Integrated dry-run detection with automatic deactivation via the motor control electronics
  • Maximum degree of control using the SCe control device with LCD display, simple navigation and adjustment using rotary knob

Design type

Highly efficient water-supply unit ready for connection (non self-priming) with 2 to 4 vertically arranged stainless steel high-pressure multistage centrifugal pumps in glanded version of the Helix VE series switched in parallel, every pump is equipped with an integrated air-cooled frequency converter, incl. Smart Controller SCe

Application

  • Fully automatic water supply and pressure boosting in inlet mode, either from the public water supply network or from a tank, for domestic, commercial, industrial and municipal applications (e.g. residential, office, administration buildings, hotels, hospitals, trades, industry, water supply companies).
  • Pumping of drinking water and process water, cooling water, fire water (apart from fire-extinguishing systems in accordance with DIN 14462 and with the approval of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fibre constituents.

Equipment/function

  • 2-4 pumps per system of the Helix VE 2 to Helix VE 52 series, with IE4-equivalent standard motor and variable auto control with integrated frequency converter for each pump
  • Automatic pump control via Smart Controller SCe
  • Parts that come in contact with the fluid are corrosion-resistant
  • Base frame made of galvanised steel, with height-adjustable vibration absorbers for insulation against structure-borne noise
  • Shut-off device on the suction and pressure sides of each pump
  • Non-return valve on the pressure side of each pump
  • Diaphragm pressure vessel 8 l, PN 16, pressure side
  • Pressure sensor, pressure side
  • Pressure gauge, pressure side
  • Optional low-water cut-out switchgear and pressure gauge, suction side

Scope of delivery

  • Factory-mounted, ready-for-connection pressure-boosting system checked for functionality and impermeability
  • Packaging
  • Installation and operating instructions

Type key

Example:

Wilo-SiBoost Smart 4 Helix VE 2204-ES

SiBoost

System for pressure boosting in the commercial area

Smart

Control device Smart Controller SCe for pumps with frequency converter

4

Number of pumps

Helix VE

Pump series

22

Nominal volume flow [m3/h] of the single pump

04

Number of single pump stages

ES

Stainless-steel design of series 22.., 36.., 52..

Technical data

  • Mains connection 3~400 V ±10 %, 50 Hz; 3~380/440 V ±10 %, 60 Hz
  • Max. fluid temperature +50 °C (+70 °C optional)
  • Max. ambient temperature of 40 °C
  • Operating pressure 16 bar (25 bar optional)
  • Inlet pressure 10 bar
  • Nominal connection diameters on discharge side R 1½ - DN 200
  • Nominal connection diameters on inlet side R 1½" - DN 200
  • Speed range 1500 – 3770 rpm
  • Protection class: IP54 (SCe control device)
  • Fuse protection A on mains side, AC 3 according to motor power and EVU regulations
  • Approved fluids (other fluids on request): Note regarding fluids: Approved fluids are generally waters which do not attack the materials used, neither chemically nor mechanically, and do not contain any abrasive or long-fibre constituents. System in accordance with DIN 1988 (EN 806)
    • Drinking water and hot water
    • Cooling water
    • Firefighting water

Materials

Helix VE 2 to Helix VE 16

  • Impellers, guide vanes, stage housing made of stainless steel 1.4307
  • Pump housing of stainless steel 1.4301
  • Shaft of stainless steel 1.4057
  • 1.4404 shaft protection sleeve
  • O-Ring gaskets made of EPDM (FKM gasket on request)
  • Pipework made of 1.4301 stainless steel

Helix VE 22 to Helix VE 52

  • Impellers, guide vanes, stage housing made of stainless steel 1.4307
  • Pump housing made of 1.4308 stainless steel or cataphoretically coated EN-GJL 250 grey cast iron
  • Shaft of stainless steel 1.4057
  • 1.4404 shaft protection sleeve
  • O-Ring gaskets made of EPDM (FKM gasket on request)
  • Pipework made of 1.4301 stainless steel

Description/construction

  • Base frame: galvanised steel, with height-adjustable vibration absorbers for comprehensive insulation against structure-borne noise as well as integrated lifting devices; other versions on request
  • Pipework: Complete pipework made of stainless steel, suitable for the connection of all conventional piping materials; the pipework is dimensioned according to the overall hydraulic performance of the pressure boosting system
  • Pumps: 2 to 4 pumps are used from the series Helix VE 2 to Helix VE 52, switched in parallel. The air-cooled frequency converters mounted on the pump motor enable infinitely variable control between 25 Hz and a maximum of 60 Hz for all pumps of this series. All parts that come in contact with the fluid are made of stainless steel for the Helix VE 2 to Helix VE 16 series or of stainless steel/grey cast iron with cataphoretic coating for the Helix VE 22 to Helix VE 52 series; other versions on request. KTW/WRAS/ACS approval for all parts that come in contact with the fluid
  • Valves: Each pump is fitted on the suction and pressure side with a standard shut-off device with DVGW approval mark and on the pressure side with a DVGW/KTW-approved non-return valve.
  • Diaphragm pressure vessel: 8 l/PN 16 arranged on the discharge side with a diaphragm made of butyl rubber, with DVGW/KTW approval, completely safe in accordance with food safety laws; for testing and inspection purposes, with a ball valve with drain and throughflow fitting with DVGW/KTW approval in accordance with DIN 4807
  • Pressure sensor: 4 to 20 mA, located on the discharge side for controlling the central Comfort Controller SC
  • Pressure indication: pressure gauge (ø 63 mm) arranged on the discharge side; additional digital indication of the discharge pressure in the alphanumeric LC display of the Smart Controller SC
  • Control device/controller: The system is equipped with a Smart Controller SC as standard

Downloads

REACH Regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (581 kB)

Download

General overview 2018 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 72

PDF (11 MB)

Download

Product

PDF: Wilo-SiBoost Smart Helix VE

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download