SCP

Design

Application

• Pumping heating water in accordance with VDI  2035, water/glycol mixtures, cooling/cold water and domestic hot water
• Applications in municipal water supply, irrigation, building services, general industry, power stations, etc.

Type key

Technical data

• Fluid temperature (mechanical seal) [°C]：
  • -20 ~ 90 ° C Standard，
  • 90 ~ 120° C: High-temperature Type，
  • >120° C on request
• Max.operating pressure [bar] ：10/16/25
• Mains connection：3~380V(±10%)-50Hz
• IP rating：IP55
• Insulation class: F
• Energy efficiency class: CL 2
• Number of motor poles/speed[rpm]：6 poles/980、4 poles/1480、2 poles/2900

Materials

• Pump housing: EN-GJL-250
• Impeller: G-CuSn10
• Shaft: X12Cr13

Construction

• Centrifugal axially split case pump, available in single-stage and two-stage design.
• Delivered as complete unit (pump with coupling, coupling guard, motor and baseplate) or without motor or only pump hydraulics
• Shaft sealing with mechanical seal or stuffing box packing
• 2-, 4- and 6-pole motors; IE3-standard to 375 kW (IE4, IE2 on request)
• Cast baseplate: SCP 200 and higher with welded steel frame (depending on the motor power and dimensions)

Scope of delivery

• Pump
• Installation and operating instructions

Options

• Other motor versions on request
• Higher volume flow up to 17 000 m³/h as special version
• Special motor (6000V, 10 000 V etc.)
• Special materials
  • Impeller: Bronze, grey cast iron, stainless steel
  • Housing: grey cast iron, spheroidal cast iron
• Cyclone separator (for flushing the sealing system)