Stratos PICO 25/0,5-6-130 | Wilo

Stratos PICO 25/0,5-6-130

Article number: 4244396

Hydraulic data
Maximum operating pressure PN	10 bar
Head max H _max	6.3 m
Flow max Q _max	3.7 m³/h
Minimum suction head at 50 °C m	0.5 m
Minimum suction head at 95 °C m	3 m
Minimum suction head at 110 °C	10 m
Min. fluid temperature T_min	-10 °C
Max. fluid temperature T_max	110 °C
Max. fluid temperature at max. ambient temperature of +25 °C T_max	110 °C
Max. fluid temperature at max. ambient temperature of +40 °C T_max	95 °C
Min. ambient temperature T_min	-10 °C
Max. ambient temperature T_max	40 °C

Motor data
Energy efficiency index (EEI)	≤0.18
Mains connection	1~230 V ±10%, 50/60 Hz
Rated power P₂	30 W
Min. speed n_min	700 1/min
Max. speed n_max	4200 1/min
Power consumption P_{1 min}	3 W
Power consumption P_{1 max}	40 W
Emitted interference	EN 61000-6-3
Interference resistance	EN 61000-6-2
Electromagnetic compatibility	EN 61800-3
Threaded cable connection	1 x PG11
Insulation class	F
Protection class	IPX4D

Materials
Pump housing	Grey cast iron
Impeller	PP-GF40
Shaft	Stainless steel
Bearing	Carbon, metal-impregnated

Installation dimensions
Pipe connection on the discharge side DNd	G 1½
Pipe connection on the suction side DNs	G 1½
Port-to-port length L0	130 mm

Function
Control mode	Δp-v for variable differential pressure Δp-c for constant differential pressure Dynamic Adapt plus Constant speed (n-const.)
Special features of the series	Night set back Mode for pressure-independent control valves (PICV) Key locking function Reset function for electricity meter Reset function to factory setting
Display	Setpoint Actual delivery head Actual volume flow Actual power consumption Energy consumption Actual speed Manually activated restart or pump venting function Warning messages in plain text (display status: yellow) Error messages in plain text (display: red) Control mode Active influences (e.g. STOP)
Pump venting function	Manual

Equipment
Approvals and labels	CE VDE EAC UKCA TR RCM
Display	Graphic colour display (2 inches)
Display information	Comfort Version: LCD display (large) for showing the head, flow volume, actual und cumulated current.
Pump control	Electronic-controlled pump
Quick electrical connection	Wilo Connector
Thermal insulation shell	Yes
Blocking-current proof motor	yes
Particle filter	yes
Key lock	yes
Operating elements	Green button and back button

Connectivity
Access via the Wilo-Assistant app	Via accessory Wilo-Smart Connect Module BT
Analogue signal as standard	0-10 V (via BMS Connect module accessories)
Digital input	Ext. OFF/Ext. MIN/ Ext. MAX (via BMS Connect module accessories)
Digital output	SSM/SBM (via BMS Connect module accessories)
wire data exchange and remote operation	Via accessories Wilo-Smart Connect Module BT

Stratos PICO 25/0,5-6-130

Blocking current-proof motor

Single-phase motor (EM) 2‐pole ‐ 1~230 V, 50 Hz

Product data
Brand	Wilo
Product description	Stratos PICO 25/0,5-6-130
Article number	4244396
EAN number	4062679126081
Colour	Green
Minimum order quantity	1
Date of sales availability	2022-01-01
Previous model article number	4216617
Previous model designation	Stratos PICO 25/1-6-130

Packaging
Packaging type	Cardboard box
Packaging property	Sales packaging
Pieces per pallet	146
Number per layer	20

Dimension, weight
Length with packaging	194 mm
Length L	160 mm
Height with packaging	121 mm
Height H	114 mm
Width with packaging	213 mm
Width W	165 mm
Gross weight, approx. m	2 kg
Net weight, approx. m	1.7 kg

Wilo-Stratos PICO, electronically controlled high-efficiency pump

Glandless circulator with screwed connection, blocking-current proof synchronous motor using ECM technology (up to 90 % energy saving compared to an uncontrolled pump) and built-in electronic power control for continuous differential pressure control.

Can be used for all heating and air-conditioning applications (-10 °C to +110 °C).

Control mode can be selected in accordance with the radiator/underfloor heating application.

Control modes:

Permanent, automatic power adjustment to system requirements without setpoint specification Wilo Dynamic Adapt plus (factory setting)
Settings assistant for number of radiators or underfloor heating area
Variable differential pressure (Δp-v)
Constant differential pressure (Δp-c)
Constant speed (n-const.)

Functions:

Automatic night setback
Fault/warning message display including description and error code in plain text
Venting routine for automatic venting of the rotor chamber
Manual restart function for additional deblocking of the pump as required
Key lock
Function for resetting the electricity meter or for resetting the settings to the factory settings
Dry-running detection
Automatic deblocking function and integrated motor protection
Supports hydronic balancing with the Wilo-Assistant app

Display:

Control mode
Setpoint
Volume flow
Delivery head
Speed
Power consumption
Electric consumption
Active influences (e.g. night setback, venting)

Version:

Graphic colour display with operation via one button manual operation level
Slot for Wilo communication modules as an interface for e.g. Bluetooth
Use the Wilo-Assistant app to read and set operating data and –among other things– set up a commissioning protocol through the Bluetooth interface (as an accessory)
Minimal consumption only 3 W
Equipped as standard with a thermal insulation shell
5-year warranty
High efficiency, TÜV tested (the certificate can be seen at www.wilo.com/legal)

Optional accessories:

Wilo-Smart Connect module BT for Bluetooth connection to mobile devices via Wilo-Assistant app
The Wilo-Connect module BMS expands the interface for use in building management systems (BMS)
Wilo-Connect module Modbus RTU expands the interface for use in building management systems

Operating Data
Min. fluid temperature T_min	-10 °C
Max. fluid temperature T_max	110 °C
Min. ambient temperature T_min	-10 °C
Max. ambient temperature T_max	40 °C
Maximum operating pressure PN	10 bar
Minimum suction head at 50 °C m	0.5 m
Minimum suction head at 95 °C m	3 m
Minimum suction head at 110 °C	10 m

Motor data
Energy efficiency index (EEI)	≤0.18
Mains connection	1~230 V ±10%, 50/60 Hz
Rated power P₂	30 W
Min. speed n_min	700 1/min
Max. speed n_max	4200 1/min
Power consumption P_{1 min}	3 W
Power consumption P_{1 max}	40 W
Emitted interference	EN 61000-6-3
Interference resistance	EN 61000-6-2
Electromagnetic compatibility	EN 61800-3
Insulation class	F
Protection class	IPX4D
Threaded cable connection	1 x PG11

Materials
Pump housing	Grey cast iron
Impeller	PP-GF40
Shaft	Stainless steel
Bearing	Carbon, metal-impregnated

Installation dimensions
Pipe connection on the suction side DNs	G 1½
Pipe connection on the discharge side DNd	G 1½
Port-to-port length L0	130 mm

Ordering information
Brand	Wilo
Product description	Stratos PICO 25/0,5-6-130
Net weight, approx. m	1.7 kg
Article number	4244396

Installation and operating instructions

Wilo-Stratos PICO

Article Number	4249388
Edition	2021-12
Number of pages	36
Language	en

PDF (5 MB)

Group Statement

Group Statement REACH

Edition	2021-05
Number of pages	5
Language	language neutral

PDF (327 KB)

Pipe installation (3)
Screwed connections/adapters
Screwed connections/adapters	Screwed connection Rp 1 x G 1½, 72 Set	112047298
	Screwed connections for circulation pumps with threaded connection. Malleable cast iron screwed connections, inserts with female threads for connection to steel pipes (DIN 2440) with Whitworth pipe threads according to DIN 10226-1. Scope of delivery 1 set of malleable cast iron screwed connections consisting of: 2 union nuts 2 inserts 2 flat gaskets
	Screwed connection Rp 1 x G 1½, 1 Set	4092741
	Screwed connections for circulation pumps with threaded connection. Malleable cast iron screwed connections, inserts with female threads for connection to steel pipes (DIN 2440) with Whitworth pipe threads according to DIN 10226-1. Scope of delivery 1 set of malleable cast iron screwed connections consisting of: 2 union nuts 2 inserts 2 flat gaskets
	Adapter G 1½/G 2	4105914
	Adapter (threaded rings) G 1 ½ to G 2 for circulation pumps with screwed connection for pipe connection DN 25 to pipe connection DN 30. Scope of delivery 1 set consisting of: 2 threaded rings 2 flat gaskets
Pipe installation, adapter fitting (9)
Flanged rings RF
Flanged rings RF	Flanged ring RF 7, PN6	110628790
	The Wilo-RF flanged rings are used for compensation of the port-to-port length in case of a pump replacement. They are provided for length compensation of screw-end pumps to a flange connection. Version as oval flange (DN 25, hole circle Ø 80 mm). Scope of delivery 1 flange ring RF 2 seals Screws/nuts (number and size based on flange version)
	Flanged ring RF 9, PN6	110679395
	The Wilo-RF flanged rings are used for compensation of the port-to-port length in case of a pump replacement. They are provided for length compensation of screw-end pumps to a flange connection. Version as round flange. Scope of delivery 1 flange ring RF 2 seals Screws/nuts (number and size based on flange version)
	Flanged ring RF 13, PN6	110679498
	The Wilo-RF flanged rings are used for compensation of the port-to-port length in case of a pump replacement. They are provided for length compensation of screw-end pumps to a flange connection. Version as round flange. Scope of delivery 1 flange ring RF 2 seals Screws/nuts (number and size based on flange version)
	Flanged ring RF 10, PN6	110851499
	The Wilo-RF flanged rings are used for compensation of the port-to-port length in case of a pump replacement. They are provided for length compensation of screw-end pumps to a flange connection. Version as round flange. Scope of delivery 1 flange ring RF 2 seals Screws/nuts (number and size based on flange version)
Threaded adapter R
Threaded adapter R	Threaded adapter R 2, GG	110626790
	The Wilo-R threaded adaptors are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of threaded pipe adaptors. Scope of delivery 1 threaded adapter R 2 gaskets
	Threaded adapter R 6, GG	110678493
	The Wilo-R threaded adaptors are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of threaded pipe adaptors. Scope of delivery 1 threaded adapter R 2 gaskets
	Threaded adapter R 1, GG	110786891
	The Wilo-R threaded adaptors are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of threaded pipe adaptors. Scope of delivery 1 threaded adapter R 2 gaskets
	Threaded adapter R 7, GG	110787094
	The Wilo-R threaded adaptors are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of threaded pipe adaptors. Scope of delivery 1 threaded adapter R 2 gaskets
	Threaded adapter R 24, GG	110880596
	The Wilo-R threaded adaptors are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of threaded pipe adaptors. Scope of delivery 1 threaded adapter R 2 gaskets
Thermal insulation (1)
Thermal insulation shell
Thermal insulation shell	Thermal insulation shell	4206066
Thermal insulation shell	Appropriate thermal insulation shell for on-site thermal insulation of the pump housing for heating applications. Suitable for screwed-version single pumps with an installation length of 130 mm and 180 mm. Reduces the heat losses of the pump by up to 85 % Ensures an even temperature distribution at the pump Reduces the overall energy consumption of the heating system and saves energy costs. Groundwater neutral, propellant-free, formaldehyde-free and 100 % recyclable. Processing notes With on-site thermal insulation, the pump housing can only be isolated up to the separating gap to the motor (not the motor), the condensate drainage outlets must not be covered! Scope of delivery Two-piece thermal insulation shell

Pump control (1)
Timer switch SK 601N
Timer switch SK 601N	Switchgear SK 601N	2120443
Timer switch SK 601N	Timer switchgear for wall fixation for the automatic, time-dependent activation/deactivation of Wilo single pumps with single-phase or three-phase motor. Switching function Automatic time-dependent activation/deactivation via 24-hour time switch at adjustable times (every ¼ hour) Parallel control of several pumps up to max. switching capacity possible. Time switch Battery backup: 100 hours/rechargeable Ni-MH battery (button cell, type V80H). Clock precision: ±1 s per day Direct connection for single-phase current (1~) for pumps without thermal winding contacts (WSK). For pumps for three-phase current (3~) or single-phase current (1~) with WSK, only together with SK 602N/ SK 622N or contactor. Scope of delivery Switchgear SK 601N 2 threaded cable connections M16 Installation and operating instructions
Pump control/interface module (3)
Connect module
Connect module	Wilo-Connect module BMS	4257834
	Retrofittable plug-in module Wilo-Connect Module BMS for pumps with Wilo-Connectivity Interface (e.g. Stratos PICO) to expand the interface for building management systems (BMS). The module is mounted to the electronic module via the Wilo-Connectivity interface of the pump (below the lockable module cover). Equipment/function Run signal display Analogue input 0–10 V for setpoint specification Signal display via relay output as changeover contact SSM collective fault signal as potential-free NC contact SBM collective run signal as potential-free NO contact Control input with configurable functions: Overriding OFF (external OFF), MIN (external MIN), MAX (external MAX) 2 PG screwed connections, with rotatable vertical or horizontal alignment Scope of delivery BMS Wilo-Connect module 2x M 20 threaded cable glands pre-assembled in vertical alignment Installation and operating instructions
	Wilo-Connect module Modbus RTU	4263625
	Retrofittable plug-in module Wilo-Connect Module Modbus RTU for pumps with Wilo-Connectivity Interface (e.g. Stratos PICO) to expand the interface for building management systems (BMS). The module is mounted to the electronic module via the Wilo-Connectivity interface of the pump (below the lockable module cover). Equipment/function Serial, digital interface for connection to building automation for the transfer of data points as: Control commands to the pump Messages from the pump Process values RS485 interface with Modbus RTU protocol Download more information at: http://www.wilo.de/automation (German) http://www.wilo.com/automation (English) Scope of delivery Modbus RTU Wilo-Connect module 2x M 20 threaded cable glands pre-assembled in vertical alignment Installation and operating instructions
Wilo-Smart Connect module BT
Wilo-Smart Connect module BT	Wilo-Smart Connect module BT	4239241
Wilo-Smart Connect module BT	Smart Connect plug-in module for adding Wilo-Smart Connect functions to the pump. Functions Bluetooth connection to Wilo-Assistant App Monitoring of pump operation Display of process values and signals Operating and setting of pump functions Scope of delivery Wilo-Smart Connect module BT Installation and operating instructions Fixation material
Plug (2)
Angle plug
Angle plug	Angle plug	4150229
Angle plug	As a substitute for the Wilo-Connector for the electrical connection of a high-efficiency pump (1~230V) in installation situations where space is restricted. The angle plug, angled to the left, has a permanently attached (cast) 2 m connection cable with free cable ends for downstream mains connection.
Connector
Connector	Wilo-Connector	4200870
Connector	For the electrical connection of high-efficiency pumps with Wilo-Connector connection. The Wilo-Connector is pre-assembledwith a 2 m connection cable 3 x 0.75 mm^² with a shockproof plug for downstream mains connection. Scope of delivery Wilo-Connector with 2 m connection cable (3 x 0.75 mm^²) and shockproof plug

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Recommended services
Wilo-Live Assistant	Wilo-Live Assistant Service	2216415
	The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems! The Wilo-Live Assistant includes: Interactive live support via video chat Direct contact with an expert Just-in-time solution to ensure maximum operational reliability of your pumps and systems
System Optimisation	System Optimisation Glandless pumps	2219250
	The Wilo Service offers proactive system optimisation by optimising settings and doing minor adjustments to ensure operational reliability. System Optimisation includes among others: Overhaul of pumps/systems to restore full performance Addition of new technologies or functions in older systems to save on capital expenditures (retrofitting)
Energy Solutions	Energy Solutions Glandless pumps	2219285
	Wilo Service offers a proactive support to point out possible energy savings. Our service creates an overview of all installed assets to show how the energy consumption of pumps or systems can be reduced. We offer targeted consultancy and analysis, including the involvement of subsidies as well as comprehensive support around the changeover to high-efficiency technologies. Wilo-Energy solution includes: Detailed assessment of the life cycle costs (LCC analysis) Energy audit including information about energy saving potential Proactive recommendation of replacement options Improving the environmental performance of your system Support in the changeover to Wilo high-efficiency pumps
More suitable services
Extended Warranty	Extended Warranty Glandless pumps	2219589
	In combination of a new pump or system Wilo offers an extended warranty of up to five years in combination with commissioning and maintenance by the Wilo Service. Extended warranty includes: Full protection and predictable cost security Regular maintenance work by the Wilo Service
Supervision	Supervision Glandless pumps	2219320
	Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project. Supervision includes: Regular on-site visits ensure the quality of information and advice Technical consultancy, also available on site Status report with recommendations after the visit Comprehensive support from a Wilo expert
Installation	Installation Glandless pumps	2219355
	The Wilo service offers installation of our pumps or pumping systems. We offer an end-to-end process from gathering information on site to installing our product in the overall plant. An optimal installation set-up and the interaction of various individual factors lay the foundation for long-term operational safety. Installation includes: Professional inspection Provision of components/materials from Wilo and third-party suppliers Installation of pipelines and electronics Test runs
Commissioning	Commissioning Glandless pumps	2219390
	For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points: Commissioning of system(s) according to checklist Parameterisation and setting of switchgear Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.) Functional check of fitted system(s) Practice-oriented operation instruction Wilo commissioning protocol The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included.
Maintenance	Maintenance BASIC Glandless pumps	2219530
	In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points: Visual inspection of the pumps/systems Mechanical check Electrical check Testing pressure vessels that may be on hand Review and, if necessary, adjustment of the system parameters Creating a maintenance protocol Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.
	Maintenance COMFORT Glandless pumps	2219416
	In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points: Visual inspection of the pumps/systems Mechanical check Electrical check Testing and possible filling of pressure vessels that may be on hand Review and, if necessary, adjustment of the system parameters Creating a maintenance protocol Consumable materials are included in the contract price Elimination of payroll and travel expenses for deployments between maintenance intervals (during normal service hours) Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.
	Maintenance PREMIUM Glandless pumps	2219545
	In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points: Visual inspection of the pumps/systems Mechanical check Electrical check Testing and possible filling of pressure vessels that may be on hand Checking the system parameters Creating a maintenance protocol Consumable materials are included in the contract price Elimination of payroll and travel expenses for deployments between maintenance intervals (during and outside normal service hours) Software updates Includes wearing parts Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.
Repair	Repair Glandless pumps	2219609
	Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system. Repair includes: Verification and elimination of error causes by experienced Wilo experts Non-binding estimate for repairs Electric-hydraulic test run to ensure correct data regarding functionality, quality and performance of the pump or system Coating of various pump or system components for an optimised efficiency factor Use of genuine spare parts only Documentation of the repair in the service report

Stratos PICO 25/0,5-6-130

Stratos PICO 25/0,5-6-130

Installation and operating instructions

Wilo-Stratos PICO

Group Statement

Group Statement REACH

Pipe installation (3)

Screwed connections/adapters

Screwed connections/adapters

Pipe installation, adapter fitting (9)

Flanged rings RF

Flanged rings RF

Threaded adapter R

Threaded adapter R

Thermal insulation (1)

Thermal insulation shell

Thermal insulation shell

Pump control (1)

Timer switch SK 601N

Timer switch SK 601N

Pump control/interface module (3)

Connect module

Connect module

Wilo-Smart Connect module BT

Wilo-Smart Connect module BT

Plug (2)

Angle plug

Angle plug

Connector

Connector

Recommended services

Wilo-Live Assistant

System Optimisation

Energy Solutions

More suitable services

Extended Warranty

Supervision

Installation

Commissioning

Maintenance

Repair