Helix V 411-1/16/E/KS/400-50 | Wilo

Helix V 411-1/16/E/KS/400-50

Article number: 4160530

Product data
Product description	Helix V 411-1/16/E/KS/400-50

Hydraulic data
Minimum efficiency index (MEI)	≥0.7
Maximum inlet pressure p inl	10 bar
Maximum operating pressure PN	16 bar
Discharge port	G 1
Min. fluid temperature T_min	-30 °C
Max. fluid temperature T_max	120 °C
Min. ambient temperature T_min	-15 °C
Max. ambient temperature T_max	50 °C

Motor data
Mains connection	3~400 V, 50 Hz
Voltage tolerance	±10 %
Rated power P₂	1.5 kW
Motor efficiency class	IE3
Activation type	Direct On Line (DOL)
Rated current I_N	3 A
Rated speed n	2900 1/min
Power factor cos φ₁₀₀	0.85
Motor efficiency 50% η_M50%	80.9 %
Motor efficiency 75% η_M75%	83.8 %
Motor efficiency 100% η_M100%	84.2 %
Insulation class	F
Protection class motor	IP55

Materials
Pump housing	Stainless steel
Impeller	Stainless steel
Shaft	Stainless steel
Mechanical seal	BQ1EGG
Gasket material	EPDM
Stage chamber material	Stainless steel

Installation dimensions
Pipe connection on the suction side DNs	G 1
Pipe connection on the discharge side DNd	G 1

Helix V 2/V4, PN 16

Dimensions H	900 mm
Dimensions H1	128 mm
Dimensions L1	102 mm
Dimensions X	132 mm
Dimensions Ø g	193 mm
Pipe connection on the suction side DNs	G 1
Pipe connection on the discharge side DNd	G 1
Motor diameter X	132 mm
Dimensions H2	606 mm

Product data
Brand	Wilo
Product description	Helix V 411-1/16/E/KS/400-50
Article number	4160530
EAN number	4048482200163
Colour	green/silver
Minimum order quantity	1
Date of sales availability	2011-09-01

Packaging
Packaging type	One-way pallet
Packaging property	Transport packaging
Pieces per pallet	1
Number per layer	1

Dimension, weight
Length with packaging	1200 mm
Length L	251 mm
Height with packaging	400 mm
Height H	900 mm
Width with packaging	400 mm
Width W	212 mm
Gross weight, approx. m	44 kg
Net weight, approx. m	38 kg

Highly efficient high-pressure multistage centrifugal pump in vertical design with in-line connections.

The non self-priming high-pressure multistage centrifugal pump has a compact overall design and is particularly efficient and easy to maintain. The pump shaft and the motor shaft of the IEC standard motor are connected by means of a clamp coupling.

A separate lantern roller bearing ensures optimum admission of axial thrusts. Intermediate bearings in the hydraulics and corrosion-resistant shaft due to stainless steel sleeve ensure a long service life. Special, permanently attached lifting eyes enable easy pump installation.

The pump is suitable for water supply, water distribution and pressure boosting, industrial recirculation systems, process water and closed cooling circuits. It can also be used in fire extinguishing systems, washing systems as well as for irrigation.

Special features/product advantages

Efficiency-optimised, laser-welded 2D/3D hydraulics, flow and degassing optimised
Corrosion-resistant impellers, guide vanes and stage housings
Flow and NPSH-optimised pump housing
Maintenance-friendly design with particularly robust coupling guard
Drinking water approval for pumps with parts that come in contact with the fluid made of stainless steel (EPDM version)

Scope of delivery

Wilo-Helix V high-pressure multistage centrifugal pump
Installation and operating instructions
PN16 version with oval flanges: Stainless steel counter flanges with the corresponding screws, nuts and gaskets

Design notes

Motor protection for 3-phase motor is to be provided on request or onsite
Single-phase AC motor equipped with built-in thermal motor protection and capacitor
In its standard position, the terminal box is aligned with the suction flange, but this can be changed if necessary
The Wilo-Helix V is equipped with a user-friendly mechanical seal in a cartridge design and standard gasket for easy maintenance
The spacer coupling (from ≥ 7.5 kW) allows the mechanical seal to be replaced without removing the motor
The flexible lantern design, which is available in two alignments, enables direct access to the mechanical seal
For pump versions PN16, PN25 and Pmax = 30 bar, round counter flanges in cast iron or stainless steel, screws, nuts and gaskets are available as accessories
Bypass sets are available as accessories
The Wilo-Helix V(F) VdS certified version upon request

Operating Data

Product data
Min. fluid temperature T_min	-30 °C
Max. fluid temperature T_max	120 °C
Max. ambient temperature T_max	50 °C
Maximum operating pressure PN	16 bar
Maximum inlet pressure p inl	10 bar
Minimum efficiency index (MEI)	≥0.7

Motor data
Mains connection	3~400 V, 50 Hz
Voltage tolerance	±10 %
Rated power P₂	1.5 kW
Motor efficiency class	IE3
Rated current I_N	3 A
Rated speed n	2900 1/min
Power factor cos φ₁₀₀	0.85
Motor efficiency 50% η_M50%	80.9 %
Motor efficiency 75% η_M75%	83.8 %
Motor efficiency 100% η_M100%	84.2 %
Insulation class	F
Protection class	IP55

Materials
Pump housing	Stainless steel
Impeller	Stainless steel
Shaft	Stainless steel
Shaft seal	BQ1EGG
Gasket material	EPDM
Stage chamber material	Stainless steel

Installation dimensions
Pipe connection on the suction side DNs	G 1
Pipe connection on the discharge side DNd	G 1

Ordering information
Brand	Wilo
Product description	Helix V 411-1/16/E/KS/400-50
Net weight, approx. m	38 kg
Article number	4160530

Installation and operating instructions

Wilo-Helix V, .. FIRST V, ..2.0-VE 2-4-6-10-16

Article Number	4143727
Edition	2023-03
Number of pages	24
Language	en

PDF (5 MB)

Wilo-Helix V/ FIRST V 22-36-52

Article Number	4120943
Edition	1603
Number of pages	1
Language	en, mk, uk

ZIP (111 MB)

Wilo-Helix V, FIRST V, 2.0-VE 22-36-52

Article Number	4120943
Edition	02/2022
Number of pages	28
Language	en

PDF (7 MB)

Group Statement

Group Statement REACH

Edition	2021-05
Number of pages	5
Language	language neutral

PDF (327 KB)

In inlet mode (5)
Counter flange (stainless steel)
Counter flange (stainless steel)	Stainless steel counter flange (oval, 2 piece), PN16/DN25	4016168
Counter flange (stainless steel)	Stainless steel threaded flange (female thread), round, for connecting pumps to the system pipework. Scope of delivery 2 counter flanges, screws and nuts
Baseplate
Baseplate	Base plate	4157154
Baseplate	Baseplate for assembly on concrete pillar. Scope of delivery 1 baseplate 4 M12 bolts (including nuts and washers) for pump fastening 4 M10 bolts (including nuts and washers) for pump fastening
Shut-off valve
Shut-off valve	Ball valve Rp 1	2663980
Shut-off valve	Ball valve with lever for easy and safe installation. Certified suitability in accordance with CE for drinking water applications (e.g. in accordance with DIN 1988). Ball valves DVGW-certified up to Rp 2. Scope of delivery Ball valve with lever grip 5
Non-return valve
Non-return valve	Non-return valve RV/S R 1	2660842
Non-return valve	Non-return valve without screwed connections for use in water supply applications, DVGW-certified. Option Screwed connection for non-return valve made of brass (separate accessories)
Screwed connection for non-return valve
Screwed connection for non-return valve	Screwed connection for non-return valve DN 25	2660509
Screwed connection for non-return valve	Kit is comprised of 2 union nuts and 2 threaded nozzles made of brass and 2 seals. For valves with flat-sealing male thread.
Level control with fault signal (4)
Float switch WAO
Float switch WAO	Float switch WAO 65, 10 m cable	2006027
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 20 m cable	2004429
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 30 m cable	2004430
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 5 m cable	503211595
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
Level control without fault signal (4)
Float switch WAO
Float switch WAO	Float switch WAO 65, 10 m cable	2006027
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 20 m cable	2004429
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 30 m cable	2004430
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 5 m cable	503211595
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
Pressure control with fault signal (3)
Wilo-EFC
Wilo-EFC	EFC1.1 3x380-480V 50/60Hz IP55	2193432
	A stand-alone frequency converter for fixed-speed pumps that are operated in variable applications, especially for heating, air conditioning and pressure boosting. Special features/product advantages Compact design with an energy-saving cooling concept for lowering temperature losses Integrated energy-efficient harmonic reduction function in the pump’s partial load range Versatile pumping application scenarios thanks to differing connection options and different control modes Simple commissioning thanks to an intuitive assistant with graphical user interface Options External communication via IF modules (optional): Profibus, DeviceNet, Profinet, Ethernet, Modbus Scope of delivery Stand-alone frequency converter Installation and operating instructions
	EFC1.5 3x380-480V 50/60Hz IP55	2193433
	A stand-alone frequency converter for fixed-speed pumps that are operated in variable applications, especially for heating, air conditioning and pressure boosting. Special features/product advantages Compact design with an energy-saving cooling concept for lowering temperature losses Integrated energy-efficient harmonic reduction function in the pump’s partial load range Versatile pumping application scenarios thanks to differing connection options and different control modes Simple commissioning thanks to an intuitive assistant with graphical user interface Options External communication via IF modules (optional): Profibus, DeviceNet, Profinet, Ethernet, Modbus Scope of delivery Stand-alone frequency converter Installation and operating instructions
Sensor kit
Sensor kit	Sensor kit	2501886
Sensor kit	For mounting an automatic single- or multi-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals for switchgear with a 4 – 20 mA input. Notice Take care to ensure that a non-return valve is placed between pump and kit! Scope of delivery Red brass and/or brass fittings Diaphragm pressure vessel 8 l, PN 16 Stainless steel pressure sensor 4-20 mA Pressure gauge Ball valve Installation and operating instructions

Bypass line (1)
Bypass line
Bypass line	Bypass line for Helix and Medana CV1-L series	4230350
Bypass line	The use of bypass lines is always appropriate when the fluid contains large amounts of air or oxygen components or otherwise tends to emit gases. As a result of the recirculation between pump head and pump suction side, an accumulation of air and/or oxygen is permanently discharged in the area of the mechanical shaft seal. Typical areas of application are e.g. pumping condensate or pressure boosting with pumping from atmospherically ventilated break tanks. Scope of delivery The set includes all components required for constructing the complete bypass line.
Fittings (2)
Non-return valve
Non-return valve	Non-return valve RV/S R 1	2660842
Non-return valve	Non-return valve without screwed connections for use in water supply applications, DVGW-certified. Option Screwed connection for non-return valve made of brass (separate accessories)
Shut-off valve
Shut-off valve	Ball valve Rp 1	2663980
Shut-off valve	Ball valve with lever for easy and safe installation. Certified suitability in accordance with CE for drinking water applications (e.g. in accordance with DIN 1988). Ball valves DVGW-certified up to Rp 2. Scope of delivery Ball valve with lever grip 5
Pipe installation (1)
Counter flange (stainless steel)
Counter flange (stainless steel)	Stainless steel counter flange (oval, 2 piece), PN16/DN25	4016168
Counter flange (stainless steel)	Stainless steel threaded flange (female thread), round, for connecting pumps to the system pipework. Scope of delivery 2 counter flanges, screws and nuts
Valves/accessories (1)
Screwed connection for non-return valve
Screwed connection for non-return valve	Screwed connection for non-return valve DN 25	2660509
Screwed connection for non-return valve	Kit is comprised of 2 union nuts and 2 threaded nozzles made of brass and 2 seals. For valves with flat-sealing male thread.
Wall fixation/installation on a base (1)
Baseplate
Baseplate	Base plate	4157154
Baseplate	Baseplate for assembly on concrete pillar. Scope of delivery 1 baseplate 4 M12 bolts (including nuts and washers) for pump fastening 4 M10 bolts (including nuts and washers) for pump fastening

Pump control (2)
Wilo-EFC
Wilo-EFC	EFC1.1 3x380-480V 50/60Hz IP55	2193432
	A stand-alone frequency converter for fixed-speed pumps that are operated in variable applications, especially for heating, air conditioning and pressure boosting. Special features/product advantages Compact design with an energy-saving cooling concept for lowering temperature losses Integrated energy-efficient harmonic reduction function in the pump’s partial load range Versatile pumping application scenarios thanks to differing connection options and different control modes Simple commissioning thanks to an intuitive assistant with graphical user interface Options External communication via IF modules (optional): Profibus, DeviceNet, Profinet, Ethernet, Modbus Scope of delivery Stand-alone frequency converter Installation and operating instructions
	EFC1.5 3x380-480V 50/60Hz IP55	2193433
	A stand-alone frequency converter for fixed-speed pumps that are operated in variable applications, especially for heating, air conditioning and pressure boosting. Special features/product advantages Compact design with an energy-saving cooling concept for lowering temperature losses Integrated energy-efficient harmonic reduction function in the pump’s partial load range Versatile pumping application scenarios thanks to differing connection options and different control modes Simple commissioning thanks to an intuitive assistant with graphical user interface Options External communication via IF modules (optional): Profibus, DeviceNet, Profinet, Ethernet, Modbus Scope of delivery Stand-alone frequency converter Installation and operating instructions
Pump control/accessories (5)
Low-water cut-out switchgear kit for domestic water systems
Low-water cut-out switchgear kit for domestic water systems	low-water cut-out switchgear kit WMS G 1¼	4204510
	The kit detects low water using pressure measurement and is adjusted to the increase in pressure and pressure maintenance of non-potable water. The kit is used exclusively for single-phase products. For horizontal pumps, the connection is established for 1" or 1"1/4 using a reduction nipple M/M 1"1/4-1". For vertical pumps, the oval shape 1"1/4 connection is possible using an oval counter flange with an O-ring. The switch-on and switch-off pressure for needs-based operation and pressure range of the pump is configured on the reverse pressure switch. The pressure measurement is carried out using a single-phase low pressure switch. If the pressure decreases and reaches 0.1 bar, the pump is stopped. The pump starts again when the pressure rises and reaches 0.5 bar. These starting and stopping pressure values are factory settings and can be changed. You can use the pressure gauge to define the values. Scope of delivery The kit is supplied with the following, unmounted components: Single-phase low-pressure switch T-connector 1/4’’ M/F/F Pressure gauge 0-6 bar M/M reduction nipple 3/8’’ – 1/4’’ T-connector 1’’1/4 – 3/8’’ – 1’’1/4 Reduction nipple M/M 1’’1/4 – 1’’ M/M nipple 1’’1/4 Oval counter flange 1’’1/4 O-ring
	low-water cut-out switchgear kit WMS G2	4204512
	The kit detects low water using pressure measurement and is adjusted to the increase in pressure and pressure maintenance of non-potable water. The kit is used exclusively for single-phase products. For horizontal pumps, the connection is established for 1"1/2 or 2" using a reduction nipple M/M 2"-1"1/2. For vertical pumps, the oval shape 2" connection is possible using an oval counter flange with an O-ring. The switch-on and switch-off pressure for needs-based operation and pressure range of the pump is configured on the reverse pressure switch. The pressure measurement is carried out using a single-phase low pressure switch. If the pressure decreases and reaches 0.1 bar, the pump is stopped. The pump starts again when the pressure rises and reaches 0.5 bar. These starting and stopping pressure values are factory settings and can be changed. You can use the pressure gauge to define the values. Scope of delivery Single-phase low-pressure switch T-connector 1/4’’ M/F/F Pressure gauge 0-6 bar M/M reduction nipple 1/2’’ – 1/4’’ T-connector 2’’– 1/2’’ – 2’’ Reduction nipple M/M 2’’ – 1’’1/2 M/M nipple 2’’ Oval counter flange 2’’ O-ring
Output filter EFC (150-500 m cable length)
Output filter EFC (150-500 m cable length)	4.1 A sin IP54 Wilo-EFC filter	6084560
	Output filter for Wilo-EFC
	4.5 A sin IP00 Wilo-EFC filter	6084575
	Output filter for Wilo-EFC
	4.5 A sin IP20 Wilo-EFC filter	6084901
	Output filter for Wilo-EFC
Pressure control (6)
Pressure sensor for systems
Pressure sensor for systems	Pressure sensor, 0 - 6 bar	2550660
	Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery Pressure sensor (factory-calibrated) Plug
	Pressure sensor, 0 - 10 bar	2550661
	Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery Pressure sensor (factory-calibrated) Plug
	Pressure sensor, 0 - 16 bar	2550662
	Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery Pressure sensor (factory-calibrated) Plug
	Pressure sensor, 0 - 25 bar	2550663
	Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery Pressure sensor (factory-calibrated) Plug
	Pressure sensor, 0 - 40 bar	2550664
	Signal transmitter for differential pressure-sensitive infinitely variable speed control. Note Take care to ensure that a non-return valve is placed between pump and sensor. Further maintenance valves and a diaphragm pressure vessel are required for error-free functioning. Scope of delivery Pressure sensor (factory-calibrated) Plug
Sensor kit
Sensor kit	Sensor kit	2501886
Sensor kit	For mounting an automatic single- or multi-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals for switchgear with a 4 – 20 mA input. Notice Take care to ensure that a non-return valve is placed between pump and kit! Scope of delivery Red brass and/or brass fittings Diaphragm pressure vessel 8 l, PN 16 Stainless steel pressure sensor 4-20 mA Pressure gauge Ball valve Installation and operating instructions
Level control (10)
Float switch WA
Float switch WA	Float switch WA65 with 5 m cable	503211390
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 10 m cable	503211893
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 20 m cable	2004431
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 30 m cable	2004432
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA KR1 S with 5 m cable	6082806
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA KR1 S with 10 m cable	6082807
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
Float switch WAO
Float switch WAO	Float switch WAO 65, 5 m cable	503211595
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 10 m cable	2006027
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 20 m cable	2004429
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
	Float switch WAO 65, 30 m cable	2004430
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON
Motor protection (2)
PTC thermistor tripping unit
PTC thermistor tripping unit	PTC thermistor tripping unit	509275993
PTC thermistor tripping unit	PTC thermistor triggering relay for switch cabinet installation (1 device per motor required). The thermistor overload relays monitor motors which are equipped with PTC thermistor temperature sensors. The temperature sensors are installed in the windings of the motors and measure the heating up of the motor directly. This enables direct monitoring and evaluation of various operating conditions. A collective fault signal (SSM) is possible with corresponding wiring in the switch cabinet.
Surcharge for thermistor sensor (high-pressure centrifugal pumps)
Surcharge for thermistor sensor (high-pressure centrifugal pumps)	Surcharge for thermistor sensor (high-pressure centrifugal pumps)	HDK_KLF
	-

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Recommended services
Maintenance	Maintenance BASIC Booster Set 1-2 pumps	2160453
	In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections, maintenance and repair carried out by WILO SE’s own customer service. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points: Visual inspection of the pumps/systems Mechanical check Electrical check Inspection of any diaphragm expansion tanks in the system (not filling) Review and, if necessary, adjustment of the system parameters Drawing up a maintenance and repair report WILO SE schedules and organises initial maintenance and repairs. Further customised maintenance and repair services are possible after the first maintenance and repairs are conducted.
	Maintenance COMFORT Booster Set 1-2 pumps	2160468
	In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections, maintenance and repair carried out by WILO SE’s own customer service. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points: Visual inspection of the pumps/systems Mechanical check Electrical check Testing and possible filling of pressure vessels that may be on hand Review and, if necessary, adjustment of the system parameters Drawing up a maintenance and repair report Consumables are included in the price Small repairs are included in the maintenance and repair price No labour and travel expenses are charged for deployments between maintenance and repair intervals (during normal operating hours) WILO SE schedules and organises initial maintenance and repairs. Further customised maintenance and repair services are possible after the first maintenance and repairs are conducted. The quoted price refers to the initial maintenance and repair offered. -NET-
	Maintenance PREMIUM Booster Set 1-2 pumps	2160483
	In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points: Visual inspection of the pumps/systems Mechanical check Electrical check Testing and possible filling of pressure vessels that may be on hand Checking the system parameters Creating a maintenance protocol Consumable materials are included in the contract price Elimination of payroll and travel expenses for deployments between maintenance intervals (during and outside normal service hours) Software updates Wearing parts included Scheduling and organisation are performed by WILO SE. Other individual maintenance offers are possible on request.
Commissioning	Commissioning Booster Set 1-2 pumps	2216414
	For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points: Commissioning of system(s) according to checklist Parameterisation and setting of switchgear Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.) Functional check of fitted system(s) Practice-oriented operation instruction Wilo commissioning protocol The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. -NET-
More suitable services
Wilo-Live Assistant	Wilo-Live Assistant Service	2216415
	The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems! The Wilo-Live Assistant includes: Interactive live support via video chat Direct contact with an expert Just-in-time solution to ensure maximum operational reliability of your pumps and systems
Extended Warranty	Extended Warranty Booster Set 1-2 pumps	2216416
	In combination of a new pump or system Wilo offers an extended warranty of up to five years in combination with commissioning and maintenance by the Wilo Service. Extended warranty includes: Full protection and predictable cost security Regular maintenance work by the Wilo Service
Supervision	Supervision Booster Set 1-2 pumps	2216412
	Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project. Supervision includes: Regular on-site visits ensure the quality of information and advice Technical consultancy, also available on site Status report with recommendations after the visit Comprehensive support from a Wilo expert
Installation	Installation Booster Set 1-2 pumps	2216413
	The Wilo service offers installation of our pumps or pumping systems. We offer an end-to-end process from gathering information on site to installing our product in the overall plant. An optimal installation set-up and the interaction of various individual factors lay the foundation for long-term operational safety. Installation includes: Professional inspection Provision of components/materials from Wilo and third-party suppliers Installation of pipelines and electronics Test runs
System Optimisation	System Optimisation Booster Set 1-2 pump	2216410
	The Wilo Service offers proactive system optimisation by optimising settings and doing minor adjustments to ensure operational reliability. System Optimisation includes among others: Overhaul of pumps/systems to restore full performance Addition of new technologies or functions in older systems to save on capital expenditures (retrofitting)
Energy Solutions	Energy Solutions Booster Set 1-2 pumps	2216411
	Wilo Service offers a proactive support to point out possible energy savings. Our service creates an overview of all installed assets to show how the energy consumption of pumps or systems can be reduced. We offer targeted consultancy and analysis, including the involvement of subsidies as well as comprehensive support around the changeover to high-efficiency technologies. Wilo-Energy solution includes: Detailed assessment of the life cycle costs (LCC analysis) Energy audit including information about energy saving potential Proactive recommendation of replacement options Improving the environmental performance of your system Support in the changeover to Wilo high-efficiency pumps
Repair	Repair Booster Set 1-2 pumps	2216417
	Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system. Repair includes: Verification and elimination of error causes by experienced Wilo experts Non-binding estimate for repairs Electric-hydraulic test run to ensure correct data regarding functionality, quality and performance of the pump or system Coating of various pump or system components for an optimised efficiency factor Use of genuine spare parts only Documentation of the repair in the service report

Helix V 411-1/16/E/KS/400-50

Helix V 2/V4, PN 16

Installation and operating instructions

Wilo-Helix V, .. FIRST V, ..2.0-VE 2-4-6-10-16

Wilo-Helix V/ FIRST V 22-36-52

Wilo-Helix V, FIRST V, 2.0-VE 22-36-52

Group Statement

Group Statement REACH

In inlet mode (5)

Counter flange (stainless steel)

Counter flange (stainless steel)

Baseplate

Baseplate

Shut-off valve

Shut-off valve

Non-return valve

Non-return valve

Screwed connection for non-return valve

Screwed connection for non-return valve

Level control with fault signal (4)

Float switch WAO

Float switch WAO

Level control without fault signal (4)

Float switch WAO

Float switch WAO

Pressure control with fault signal (3)

Wilo-EFC

Wilo-EFC

Sensor kit

Sensor kit

Bypass line (1)

Bypass line

Bypass line

Fittings (2)

Non-return valve

Non-return valve

Shut-off valve

Shut-off valve

Pipe installation (1)

Counter flange (stainless steel)

Counter flange (stainless steel)

Valves/accessories (1)

Screwed connection for non-return valve

Screwed connection for non-return valve

Wall fixation/installation on a base (1)

Baseplate

Baseplate

Pump control (2)

Wilo-EFC

Wilo-EFC

Pump control/accessories (5)

Low-water cut-out switchgear kit for domestic water systems

Low-water cut-out switchgear kit for domestic water systems

Output filter EFC (150-500 m cable length)

Output filter EFC (150-500 m cable length)

Pressure control (6)

Pressure sensor for systems

Pressure sensor for systems

Sensor kit

Sensor kit

Level control (10)

Float switch WA

Float switch WA

Float switch WAO

Float switch WAO

Motor protection (2)

PTC thermistor tripping unit

PTC thermistor tripping unit

Surcharge for thermistor sensor (high-pressure centrifugal pumps)

Surcharge for thermistor sensor (high-pressure centrifugal pumps)

Recommended services

Maintenance

Commissioning

More suitable services

Wilo-Live Assistant

Extended Warranty

Supervision

Installation

System Optimisation

Energy Solutions