CS 2-60-2 | Wilo

CS 2-60-2

Number of results: 2

Flow

Head / Pump pressure

Product design type	Glandless high-efficiency pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Stratos PICO 25/0,5-6	Yonos PICO 25/1-6	CS 2-60-2
Article number	4244395	4215515	-
Series	Wilo-Stratos PICO	Wilo-Yonos PICO	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length l0	180 mm	180 mm	180 mm
Pump connection	G 1½	G 1½	-
Pump connection (alternative designation)	RP 1	RP 1	-
	DN 25	DN 25	-
Display	Graphic colour display (2 inches)	LED segment display	-
Comment	Fits without modifications	Fits without modifications	-
Result summary
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Dynamic Adapt plus	-	-
	Constant speed (n-const.)	-	-
	-	Constant speed (3 speed stages)	-
Special features of the series	Night set back	-	-
	Mode for pressure-independent control valves (PICV)	-	-
	Key locking function	-	-
	Reset function for electricity meter	-	-
	Reset function to factory setting	-	-
Display	Setpoint	Setpoint	-
	Actual delivery head	-	-
	Actual volume flow	Actual volume flow	-
	Actual power consumption	Actual power consumption	-
	Energy consumption	-	-
	Actual speed	-	-
	Manually activated restart or pump venting function	Manually activated restart or pump venting function	-
	Warning messages in plain text (display status: yellow)	-	-
	Error messages in plain text (display: red)	-	-
	Control mode	-	-
	Active influences (e.g. STOP)	-	-
	-	Fault signals (error codes)	-
Pump venting function	Manual	Manual	-
Dry-running detection	yes	-	-
Equipment
Thermal insulation shell	Yes	As accessory	-
Quick electrical connection	Wilo Connector	Wilo Connector	-
Blocking-current proof motor	yes	yes	-
Particle filter	yes	yes	-
Key lock	yes	-	-
Operating elements	Green button and back button	Green button	-
Connectivity
Analogue signal as standard	0-10 V (via BMS Connect module accessories)	-	-
Digital output	SSM/SBM (via BMS Connect module accessories)	-	-
Digital input	Ext. OFF/Ext. MIN/ Ext. MAX (via BMS Connect module accessories)	-	-
Access via the Wilo-Assistant app	Via accessory Wilo-Smart Connect Module BT	-	-
wire data exchange and remote operation	Via accessories Wilo-Smart Connect Module BT	-	-
Motor data
Phases	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	-
Energy efficiency index (EEI)	≤0.18	≤0.20	-
Rated power P₂	30 W	30 W	-
Min. speed n_min	700 1/min	700 1/min	-
Max. speed n_max	4200 1/min	4200 1/min	-
Power consumption P_{1 min}	3 W	4 W	-
Power consumption P_{1 max}	40 W	40 W	-
Emitted interference	EN 61000-6-3	EN 61000-6-3	-
Interference resistance	EN 61000-6-2	EN 61000-6-2	-
Electromagnetic compatibility	EN 61800-3	EN 61800-3	-
Insulation class	F	F	-
Protection class	IPX4D	IPX4D	-
Materials
Material	Grey cast iron	Grey cast iron	-
Impeller	PP-GF40	PP-GF40	-
Shaft	Stainless steel	Stainless steel	-
Bearing	Carbon, metal-impregnated	Carbon, metal-impregnated	-
Pipe connection
Inlet connection	G 1½	G 1½	G 1½
PN connection on suction side	PN 10	PN 10	PN 10
Outlet connection	G 1½	G 1½	G 1½
PN connection on discharge side	PN 10	PN 10	PN 10
Dimension, weight
Length with packaging	194 mm	194 mm	-
Length L	180 mm	180 mm	-
Height with packaging	121 mm	105 mm	-
Height H	114 mm	102 mm	-
Width with packaging	213 mm	174 mm	-
Width W	165 mm	131 mm	-
Gross weight, approx. m	2.2 kg	2 kg	-
Net weight, approx. m	1.9 kg	1.8 kg	-
Ordering information
Product description	Stratos PICO 25/0,5-6	Yonos PICO 25/1-6	CS 2-60-2
Brand	Wilo	Wilo	Ruetschi
EAN number	4062679126159	4048482758473	-
Article number	4244395	4215515	-

Data sheet

Description
Product description	CS 2-60-2
Brand	Ruetschi
Port-to-port length l0	180 mm

Motor data
Phases	1

Pipe connection
Inlet connection	G 1½
PN connection on suction side	PN 10
Outlet connection	G 1½
PN connection on discharge side	PN 10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.

We have answers to your questions

Do our products and services interest you? If so, we are happy to help!

Whether you're creating a new project or adjusting service specifications, designing different types of equipment, advising on the selection of pumps and switchgear, or just helping with hydraulic and control issues.

We can help you! Please contact our service team to make an appointment.

Find the right contact for your question.