1030 1~ | Wilo

1030 1~

Number of results: 2

Flow

Head / Pump pressure

Product design type	Glandless premium smart-pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Stratos MAXO 30/0,5-6 PN 10	Yonos MAXO 30/0,5-7 PN 10	1030 1~
Article number	2164573	2120642	-
Series	Wilo-Stratos MAXO	Wilo-Yonos MAXO	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length l0	180 mm	180 mm	180 mm
Pump connection	G 2	G 2	-
Pump connection (alternative designation)	RP 1 1/2	RP 1 1/2	-
	DN 30	DN 30	-
Display	Graphic colour display (4.3 inches)	LED segment display	-
Comment	Fits without modifications	Fits without modifications	-
Result summary
Variable criteria
Designation comparison pump	TOP-S 30/7 (3~400/230 V, PN 10)	-	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	-	-
	Dynamic Adapt plus	-	-
	ΔT-const. for constant differential temperature control	-	-
	T-const. for constant temperature control	-	-
	Constant Q for constant volume flow control	-	-
	Multi Flow Adaptation	-	-
	Δ T-const. for constant differential temperature control	-	-
	User-defined PID control	-	-
	Constant speed (n-const.)	-	-
	-	Constant speed (3 speed stages)	-
Special features of the series	Heating/Cooling switching	-	-
	Night set back	-	-
	Heat quantity measurement	-	-
	Cooling quantity measurement	-	-
	Key locking function	-	-
	No-Flow Stop	-	-
	Reset function to factory setting	-	-
	Adjustable volume flow limiter	-	-
	Ability to save and restore configured pump settings (3 restoration points)	-	-
	Fault message and warning message in plain text including suggested remedy	-	-
Multi pump operation	Main/Standby	-	-
	Parallel operation	-	-
	-	Main/Standby (with Connect Module Yonos MAXO)	-
Measurement value logging	Heat and cooling capacity measurement	-	-
Display	Setpoint	Setpoint	-
	Actual delivery head	-	-
	Actual volume flow	-	-
	Actual power consumption	-	-
	Energy consumption	-	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-
	Warning messages in plain text (display status: yellow)	-	-
	Error messages in plain text (display: red)	-	-
	Pump venting (display status: blue)	-	-
	Control mode	-	-
	Active influences (e.g. STOP)	-	-
	-	Fault signals (error codes)	-
Display (can also be selected)	Speed	-	-
	Heating quantity	-	-
	Cooling quantity	-	-
	Operating hours	-	-
	Mains voltage	-	-
	Warning message	-	-
	Error message	-	-
Pump venting function	Yes	-	-
Dry-running detection	yes	-	-
Equipment
Thermal insulation shell	Yes	As accessory	-
Cold water insulation shell	As accessories	-	-
Quick electrical connection	Wilo Connector	Wilo plug	-
Blocking-current proof motor	yes	yes	-
Particle filter	yes	yes	-
Key lock	yes	-	-
Fluid temperature sensor	Integrated	-	-
Connectivity
Analogue signal as standard	0-10 V	-	-
	2-10 V	-	-
	4-20 mA	-	-
	0-20 mA	-	-
	PT1000	-	-
Digital output	SSM	SSM	-
	SBM	-	-
Digital input	Ext. OFF	-	-
	Ext. MIN	-	-
	Ext. MAX	-	-
	MANUAL (BMS-OFF)	-	-
	Key lock	-	-
	Switchover between heating/cooling mode	-	-
	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
Bus communication via additional accessories	BACnet MS/TP	-	-
	LON	-	-
	Modbus RTU	-	-
	CANopen	-	-
	PLR	-	-
	BACnet IP	-	-
	Modbus TCP	-	-
Access via the Wilo-Assistant app	Yes	-	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	-	-
wire data exchange and remote operation	Bluetooth	-	-
Motor data
Phases	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50 Hz
Energy efficiency index (EEI)	≤0.18	≤0.20	-
Min current I_min	0.11 A	0.08 A	-
Max current I_max	0.95 A	1 A	-
Rated power P₂	114 W	85 W	-
Min. speed n_min	750 1/min	1000 1/min	-
Max. speed n_max	3050 1/min	3700 1/min	-
Power consumption P_{1 min}	7 W	5 W	-
Power consumption P_{1 max}	135 W	120 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	-
Protection class	IPX4D	IPX4D	-
Materials
Material	Grey cast iron	Grey cast iron	-
Impeller	PPS-GF40	PPE/PS-GF30	-
Shaft	Stainless steel	Stainless steel	-
Bearing	Carbon-graphite	Carbon-graphite	-
Pipe connection
Inlet connection	G 2	G 2	-
PN connection on suction side	PN 10	PN 10	-
Outlet connection	G 2	G 2	G 2
PN connection on discharge side	PN 10	PN 10	PN 10
Dimension, weight
Length with packaging	400 mm	300 mm	-
Length L	335 mm	203 mm	-
Height with packaging	263 mm	394 mm	-
Height H	180 mm	224 mm	-
Width with packaging	300 mm	200 mm	-
Width W	210 mm	105 mm	-
Gross weight, approx. m	8.3 kg	5.9 kg	-
Net weight, approx. m	7.2 kg	4.6 kg	-
Ordering information
Product description	Stratos MAXO 30/0,5-6 PN 10	Yonos MAXO 30/0,5-7 PN 10	1030 1~
Brand	Wilo	Wilo	Vadstena
EAN number	4048482699424	4048482235899	-
Article number	2164573	2120642	-

Data sheet

Description
Product description	1030 1~
Brand	Vadstena
Port-to-port length l0	180 mm

Motor data
Phases	1
Mains connection	1~230 V, 50 Hz

Pipe connection
Outlet connection	G 2
PN connection on discharge side	PN 10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.

We have answers to your questions

Do our products and services interest you? If so, we are happy to help!

Whether you're creating a new project or adjusting service specifications, designing different types of equipment, advising on the selection of pumps and switchgear, or just helping with hydraulic and control issues.

We can help you! Please contact our service team to make an appointment.

Find the right contact for your question.