Wilo-EMU FA

Submersible sewage pump without cooling system for continuous duty for stationary and portable wet installation.

Pumping of

• Sewage containing faeces
• Pre-cleaned sewage without faeces and long-fibre components
• Wastewater

• Heavy-duty version made of grey cast iron
• Dry motors with ex-protection in accordance with ATEX
• Winding temperature monitoring

• Mains connection: 3~400 V, 50 Hz
• Submerged operating mode: S1
• Non-immersed operating mode: S2-15 or S2-30
• Motor monitoring: Winding temperature
• Protection class: IP68
• Insulation class: H
• Fluid temperature: 3 to 40 °C
• Cable length: 10 m
• Free ball passage from 45 mm to 100 mm
• Max. immersion depth: 20 m

• Pump housing: EN-GJL-250
• Impeller: EN-GJL or EN-GJS
• Static gaskets: NBR
• Fluid-side seal: Mechanical seal made of SiC/SiC
• Motor-side seal (depending on type):-Rotary shaft seal made of NBR- Mechanical seal made of SiC/SiC or carbon/ceramic
• Motor housing: EN-GJL-250
• Shaft: Stainless steel 1.4021

Submersible sewage pump as submersible monobloc unit for stationary and portable wet installation.

Hydraulics

The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter content is 8%, depending on the hydraulics and impeller type. The following impeller shapes are currently used:

• Vortex impeller (W)
• Single-channel impeller (E)

Each single-channel hydraulic system is equipped with an impeller wear ring and casing wear ring made of hardened material. These ensure long-term uniform efficiency of the unit and minimize maintenance costs.

Motor

Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty.

All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe.

The cable inlet is longitudinally watertight, the cable length is 10 m and the cable has free ends.

Seal

Fluid-side and motor-side sealing is possible in the following versions depending on the motor type:

• Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side
• Version G: Two independently-acting mechanical seals

Ex-approval

The motors have ex-approvals according to the ATEX directive.

• Submersible sewage pump ready for connection with 10 m connection cable without plug
• Installation and operating instructions

• Suspension unit or pump support foot
• Various pressure outlets and Storz couplings
• Chains
• Fixation sets with anchor bolts
• Switchgear, relays and plugs

Operation with non-immersed motor

Surface-cooled motors (T motors) can be non-immersed only if an operating mode is specified for non-immersed operation! Observe the specifications on the rating plate.

Dry-running protection

The hydraulics housing must always be immersed to prevent air from being drawn in. In the case of fluctuating fluid levels, the system should shut down automatically as soon as the minimum water submersion is reached.

Horizontal installation

Horizontal installation is not possible!

• Mains connection: 3~400 V, 50 Hz
• Submerged operating mode: S1
• Non-immersed operating mode: S2-15 or S2-30
• Motor monitoring: Winding temperature
• Protection class: IP68
• Insulation class: H
• Fluid temperature: 3 to 40 °C
• Cable length: 10 m
• Free ball passage from 45 mm to 100 mm
• Max. immersion depth: 20 m

• Pump housing: EN-GJL-250
• Impeller: EN-GJL or EN-GJS
• Static gaskets: NBR
• Fluid-side seal: Mechanical seal made of SiC/SiC
• Motor-side seal (depending on type):-Rotary shaft seal made of NBR- Mechanical seal made of SiC/SiC or carbon/ceramic
• Motor housing: EN-GJL-250
• Shaft: Stainless steel 1.4021

Submersible sewage pump as submersible monobloc unit for stationary and portable wet installation.

Hydraulics

The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter content is 8%, depending on the hydraulics and impeller type. The following impeller shapes are currently used:

• Vortex impeller (W)
• Single-channel impeller (E)

Each single-channel hydraulic system is equipped with an impeller wear ring and casing wear ring made of hardened material. These ensure long-term uniform efficiency of the unit and minimize maintenance costs.

Motor

Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty.

All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe.

The cable inlet is longitudinally watertight, the cable length is 10 m and the cable has free ends.

Seal

Fluid-side and motor-side sealing is possible in the following versions depending on the motor type:

• Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side
• Version G: Two independently-acting mechanical seals

Ex-approval

The motors have ex-approvals according to the ATEX directive.

• Submersible sewage pump ready for connection with 10 m connection cable without plug
• Installation and operating instructions

• Suspension unit or pump support foot
• Various pressure outlets and Storz couplings
• Chains
• Fixation sets with anchor bolts
• Switchgear, relays and plugs

Operation with non-immersed motor

Surface-cooled motors (T motors) can be non-immersed only if an operating mode is specified for non-immersed operation! Observe the specifications on the rating plate.

Dry-running protection

The hydraulics housing must always be immersed to prevent air from being drawn in. In the case of fluctuating fluid levels, the system should shut down automatically as soon as the minimum water submersion is reached.

Horizontal installation

Horizontal installation is not possible!