Initial Drain
Submersible pump
- Easy installation in narrow shafts due to its compact design and low weight
- Motor monitoring ensures reliable operation
- Attached float switch for easy operation
Wilo-Initial Drain
Recommended services
Wilo-Initial Drain
Design
Submersible pump for transportable wet installation in intermittent operation.Liquid
For the pumping in domestic areas (household) of the fluids listed:
- Wastewater (with small amounts of sand and gravel)
Equipment/function
- Integrated operating capacitor
- Self-switching thermal motor monitoring
- Float switch
- Shockproof plug
Type key
Example: | Wilo-Initial DRAIN 10-7/523/AEF-10M |
Initial DRAIN | Submersible drainage pump |
10 | Max. volume flow in m³/h |
7 | Max. delivery head in m |
5 | Mains frequency:
|
23 | Code for rated voltage:
|
A | Connection cable with float and plug |
EF | Plug type
|
10M | Length of connection cable |
Technical data
- Mains connection: 1~230 V, 50 Hz; 1~220 V, 50 Hz; 1~220 V, 60 Hz
- Submerged operating mode: S1
- Non-immersed operating mode: S3 25%
- IP rating: IP68
- Insulation class: F (155 °C/311 °F)
- Fluid temperature: 3 ... 35 °C (37 ... 95 °F)
Materials
- Hydraulics housing: PP
- Impeller: PA6-GF30
- Motor housing: 1.0038 (steel)
- Sealing:
- Hydraulics/motor: NBR
- Static: NBR
- Shaft end: 1.4005 (AISI 416)
Construction
Submersible pump with a vortex impeller and a vertical discharge port with threaded connection (male thread). Pump housing and impeller made of composite material. Surface-cooled single-phase AC motor (operating capacitor integrated) with self-switching thermal motor monitoring and a rotary shaft seal. Motor housing made of steel. Connection cable with a float switch and a shockproof plug.Scope of delivery
- Pump
- Elbow with threaded flange (pre-mounted)
- Hose nozzle
- Installation and operating instructions