Padus PRO
Submersible pump
The portable submersible pump for reliable and long-term drainage of excavations.
- High reliability in abrasive fluids thanks to rubber-coated hydraulics and an impeller made of Duplex chrome steel
- Easy installation thanks to low weight and flexible discharge connection (vertical/horizontal)
- Active cooling for reliable continuous operation
- Continuous duty in slurping operation thanks to passive cooling
- Easy maintenance thanks to quick access to wearing parts
- Equipped with energy-efficient IE3 motor technology as standard
- Highest operational reliability thanks to integrated protection function
Recommended services
Design
Submersible drainage pumpApplication
Pumping of
- Wastewater
- Process water
Equipment/function
- IE3 motor
- A version with float switch and motor protection plug
- Sheath current cooling
Type key
Example: | Wilo-Padus PRO M08L/T039-540/A |
Padus | Submersible drainage pump |
PRO | Series for construction site use |
M | Open multi-channel impeller |
08 | Nominal diameter of the discharge port: G3 |
L | Low-pressure version |
T | Mains connection version: M = 1~ T = 3~ |
039 | Value/10 = motor power P2 in kW |
5 | Frequency (5 = 50 Hz, 6 = 60 Hz) |
40 | Rated voltage code |
A | Additional electrical equipment: P = with plug A = with float switch and motor protection plug O = bare cable end (on demand) |
Technical data
- Mains connection: 3~400 V, 50 Hz
- IP rating: IP68
- Max. immersion depth: 20 m
- Fluid temperature: 3 … 40 °C
- Cable length: 23 m
- Pressure port: Size B Storz coupling
Materials
- Motor housing: EN-AC-AlSi10Mg
- Cooling shroud: 1.4404
- Pump housing: EN-AC-AlSi10Mg + NBR-70
- Impeller: 1.4470
- Suction strainer: 1.4404
- Shaft: 1.4404
- Seal:
- On motor side: SiC/SiC
- Fluid side: SiC/SiC
- Static gaskets: NBR
Construction
Submersible drainage pump as submersible close-coupled unit for portable wet installation.
Hydraulics
The discharge-side outlet is designed as a vertical threaded connection with a Storz coupling. If necessary, the outlet on the pressure side can be aligned horizontally. Semi-open, multi-channel impellers are used in the process. The inlet has been equipped with a suction strainer. Consequently, coarse elements in the fluid are filtered upstream of the suction port.
Motor
IE3 motors are available in single-phase and three-phase versions. Motors feature thermal motor monitoring. The motor is cooled by the sheath flow cooling. Continuous duty is possible when immersed/non-immersed, also in slurping operation. A sealing chamber protects the motor from fluid ingress.
The connection cable is permanently connected and the cable is 23 m long:
- O-version: Cable with bare ends
- A-version: Cable with float switch and plug
- P-version: Cable with plug
Seal
The sealing on the fluid side and on the motor side is performed by two bidirectional mechanical seals.
Scope of delivery
- Pump with bare cable end
- Pump with float switch and motor protection plug (A version)
- Discharge port with Storz pipe coupling
- Installation and operating instructions
Accessories
- Pressure hose kit with Storz coupling
- Motor protection plug
Filtered by
Datasheet and documentation
Installation and operating instructions
Wilo-Padus PRO
| Article Number | 6084247 |
| Issue date | 2019-10 |
| Edition | 02 |
| Language | en |
Certification booklet
Wilo-Padus PRO
| Article Number | 6053756 |
| Issue date | 2020-06 |
| Edition | 02 |
| Language | language neutral |
Group Statement
Group Statement REACH
| Issue date | 2021-05 |
| References | REACH |
| Certification and inspection body | Self Declaration |
| Issue date | 2026-04-17 |
| Language | language neutral |