Rexa MINI3
Submersible pump
The reliable wastewater and sewage pump for household and groundwater drainage.
- High efficiency and operational reliability thanks to optimised hydraulics
- Easy installation – even in narrow drainage pits – thanks to its lightweight, compact design with integrated condenser and threaded flange
- Reliable use in a variety of drainage applications thanks to the corrosion-free impeller and sealed cable inlet
- Longer maintenance intervals thanks to the high-volume sealing chamber and double seal
- Quick maintenance facilitated by direct access to the sealing chamber and pump housing
Recommended services
Design
Submersible pump for stationary and portable wet installation in intermittent operation.Liquid
For the pumping in domestic areas of:
- Sewage without faeces
- Wastewater (with small amounts of sand and gravel)
Note: Sewage containing faeces can be pumped when the pump is installed in the DrainLift WS 50 pump chamber. The system has been approved in accordance with EN 12050-1.
Equipment/function
- Self-switching thermal motor monitoring
- Single-phase AC motor with integrated capacitor
- Attached float switch (version A)
Type key
Example: | Wilo-Rexa MINI3-V04.11/M06-523/A-5M |
Rexa | Submersible sewage pump |
MINI3 | Series |
V | Vortex impeller |
04 | Nominal diameter discharge connection G 1½ IG |
11 | Max. delivery head in m |
M | Mains connection version:
|
06 | Value/10 = rated power P in kW |
5 | Mains frequency:
|
23 | Rated voltage code |
A | Additional electrical equipment:
|
5M | Connection cable length |
Technical data
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Submerged operating mode: S1
- Non-immersed operating mode: S3 20%
- IP rating: IP68
- Insulation class: F
- Fluid temperature: 3 ... +40 °C (37 ... 104 °F)
Materials
- Hydraulics housing: EN-GJL-200 (ASTM A48 Class 30)
- Impeller: Composite material (PK-GF30)
- Cover plate on suction port: Stainless steel
- Motor housing: 1.4301 (AISI 304)
- Seal:
- On pump side: C/MgSi (BXPFF)
- On the motor side: NBR
- Static: NBR
- Shaft end: 1.4301 (AISI 304)
Construction
Rexa MINI3-V ... -P
Sewage pump with vortex impeller and vertical threaded connection. Hydraulics housing made of grey cast iron, impeller made of plastic. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Detachable connection cable with fitted plug (CEE 7/7).
Rexa MINI3-V ... -A
Sewage pump with vortex impeller and vertical threaded connection. Hydraulics housing made of grey cast iron, impeller made of plastic. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Detachable connection cable with float switch and fitted plug (CEE 7/7).
Rexa MINI3-V ... -O
Sewage pump with vortex impeller and vertical threaded connection. Hydraulics housing made of grey cast iron, impeller made of plastic. Surface-cooled 3~ motor with self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Detachable connection cable with bare cable end, for fixed connection to on-site controls. Pump without float switch and plug!
Scope of delivery
- Pump
- Installation and operating instructions
Filtered by
Datasheet and documentation
Installation and operating instructions
Wilo-Rexa MINI3
| Article Number | 3094116 |
| Issue date | 2026-04-01 |
| Edition | 04 |
| Language | en |
Group Statement
Group Statement REACH
| Issue date | 2021-05 |
| References | REACH |
| Certification and inspection body | Self Declaration |
| Issue date | 2026-04-17 |
| Language | language neutral |