Wilo-Initial Drain | Wilo

Wilo-Initial Drain

Wilo-Initial Drain

Вашите преимущества

Лесен монтаж в тесни шахти благодарение на компактната конструкция и ниското тегло
Надеждна експлоатация благодарение на самовключваща се защита на мотора
Лесна работа благодарение на прикрепения поплавъчен превключвател

Препоръчителни сервизни услуги

Конструкция

Submersible pump for fully automatic operation in portable wet well installation.

Течности

For the pumping in domestic areas of wastewater with small amounts of sand and gravel.

Окомплектовка/функция

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Кодово означение на типовете

Example	Wilo-Initial DRAIN 10-7/522/AEF-10M
Initial	Series
Drain	Wastewater pump
10	Nominal flow in m³/h
7	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10 M	Cable length

Технически характеристики

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Материали

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Конструкция

Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Комплект на доставката

Pump
Hose connection Ø 24/32 mm, enclosed
Installation and operating instructions

Инструкции за монтаж и експлоатация