Yonos MAXO-D 50/0,5-9 PN 6/10
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 10 bar |
| Head max H max | 9.6 m |
| Flow max Q max | 28.7 m³/h |
| Minimum suction head at 50 °C m | 5 m |
| Minimum suction head at 95 °C m | 12 m |
| Minimum suction head at 110 °C | 18 m |
| Min. fluid temperature Tmin | -20 °C |
| Max. fluid temperature Tmax | 110 °C |
| Min. ambient temperature Tmin | -20 °C |
| Max. ambient temperature Tmax | 40 °C |
| Motor data | |
|---|---|
| Energy efficiency index (EEI) | ≤0.23 |
| Mains connection | 1~230 V ±10%, 50/60 Hz |
| Min current Imin | 0.17 A |
| Max current Imax | 2.15 A |
| Rated power P2 | 400 W |
| Min. speed nmin | 950 1/min |
| Max. speed nmax | 4100 1/min |
| Power consumption P1 min | 15 W |
| Power consumption P1 max | 490 W |
| Emitted interference | EN 61800-3;2004+A1;2012 /residential area (C1) |
| Interference resistance | EN 61800-3;2004+A1;2012 /industrial environment (C2) |
| Threaded cable connection | 2 x M20x1.5 |
| Insulation class | F |
| Protection class | IPX4D |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | PPS-GF40 |
| Shaft | Stainless steel |
| Bearing | Carbon, metal-impregnated |
| Installation dimensions | |
|---|---|
| Pipe connection on the discharge side DNd | DN 50 |
| Pipe connection on the suction side DNs | DN 50 |
| Port-to-port length L0 | 280 mm |
| Function | |
|---|---|
| Control mode |
|
| Multi pump operation | Main/Standby |
| Display | Setpoint |
| Equipment | |
|---|---|
| Approvals and labels |
|
| Display | LED segment display |
| Display information | Basic Versio n: LED display (small) for showing the set head or speed stage. |
| Pump control | Electronic-controlled pump |
| Quick electrical connection | Wilo plug |
| Connectivity | |
|---|---|
| Digital input | Ext. OFF (via accessories Wilo-Connect module Yonos MAXO) |
| Digital output |
|
Yonos MAXO-D 50-0,5/9
1~230V, 50/60 Hz
| SSM: | Collective fault signal (NC contact in accordance with VDI 3814, load capacity 1 A, 250 V ~) |
Standard: 1~230 V, 50/60 Hz
Option: 3~230 V, 50/60 Hz
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Yonos MAXO-D 50/0,5-9 PN 6/10 |
| Article number | 2120667 |
| EAN number | 4048482274911 |
| Colour | green/black |
| Minimum order quantity | 1 |
| Date of sales availability | 2013-09-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 12 |
| Number per layer | 4 |
| Dimension, weight | |
|---|---|
| Length with packaging | 525 mm |
| Length L | 280 mm |
| Height with packaging | 375 mm |
| Height H | 413 mm |
| Width with packaging | 385 mm |
| Width W | 310 mm |
| Gross weight, approx. m | 28.9 kg |
| Net weight, approx. m | 26.4 kg |
High-efficiency pump Wilo-Yonos MAXO-D, electronically controlled. Glandless twin-head pump, synchronous motor according to ECM technology and integrated power control for continuous differential pressure control. Can be used for all heating, ventilation and air-conditioning applications.
Each pump can be operated in individual operation (main/standby operation). The connection module Yonos MAXO can be used for automatic fault-actuated switchover.
Standard-equipped with:
- Preselectable control modes for optimum load adjustment: Δp-c (constant differential pressure), Δp-v (variable differential pressure)
- 3 speed stages (n = constant)
- LED for setting the setpoint and displaying error messages
- Electrical connection with the Wilo plug
- Fault lamp and contact for collective fault signal
For flange-end pumps - flange versions:
- Standard version for DN 32 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges
- Standard version for DN 80/DN 100 pumps: PN 6 flange (designed for PN 16 according to EN 1092-2) for PN 6 counter flange
| Operating Data | |
|---|---|
| Min. fluid temperature Tmin | -20 °C |
| Max. fluid temperature Tmax | 110 °C |
| Min. ambient temperature Tmin | -20 °C |
| Max. ambient temperature Tmax | 40 °C |
| Maximum operating pressure PN | 10 bar |
| Minimum suction head at 50 °C m | 5 m |
| Minimum suction head at 95 °C m | 12 m |
| Minimum suction head at 110 °C | 18 m |
| Motor data | |
|---|---|
| Energy efficiency index (EEI) | ≤0.23 |
| Mains connection | 1~230 V ±10%, 50/60 Hz |
| Min current Imin | 0.17 A |
| Max current Imax | 2.15 A |
| Rated power P2 | 400 W |
| Min. speed nmin | 950 1/min |
| Max. speed nmax | 4100 1/min |
| Power consumption P1 min | 15 W |
| Power consumption P1 max | 490 W |
| Emitted interference | EN 61800-3;2004+A1;2012 /residential area (C1) |
| Interference resistance | EN 61800-3;2004+A1;2012 /industrial environment (C2) |
| Insulation class | F |
| Protection class | IPX4D |
| Threaded cable connection | 2 x M20x1.5 |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | PPS-GF40 |
| Shaft | Stainless steel |
| Bearing | Carbon, metal-impregnated |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | DN 50 |
| Pipe connection on the discharge side DNd | DN 50 |
| Port-to-port length L0 | 280 mm |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Yonos MAXO-D 50/0,5-9 PN 6/10 |
| Net weight, approx. m | 26.4 kg |
| Article number | 2120667 |
Installation and operating instructions
Wilo-Yonos MAXO/-D/-Z
| Article Number | 2226411 |
| Edition | 2023-12 |
| Number of pages | 428 |
| Language | da, de, el, en, es, fi, fr, it, nl, no, pt, sv, tr |
PDF (9 MB)Wilo-Yonos MAXO/-D/-Z
| Article Number | 2226410 |
| Edition | 2023-12 |
| Number of pages | 36 |
| Language | en |
PDF (7 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (327 KB)3D_DWG
Yonos MAXO-D 50/0,5-9 PN6/10
| Language | language neutral |
DWG (1 MB)3D_STEP
Yonos MAXO-D 50/0,5-9 PN6/10
| Language | language neutral |
STP (2 MB)2D_DWG_TOP
Yonos MAXO-D 50/0,5-9 PN6/10
| Language | language neutral |
DWG (16 KB)2D_DWG_FRONT
Yonos MAXO-D 50/0,5-9 PN6/10
| Language | language neutral |
DWG (24 KB)2D_DWG_RIGHT
Yonos MAXO-D 50/0,5-9 PN6/10
| Language | language neutral |
DWG (22 KB)Pipe installation (2) | |||
Two steel weld neck flanges in accordance with DIN-EN 1092-1 type 11 with a neck for welding to pipes as well as gaskets and screws/nuts for the flange connections. Depending on the configuration of the operating pressure of an installation, the appropriate counter flange must be selected for the operating pressure. Scope of delivery
| |||
Two steel weld neck flanges in accordance with DIN-EN 1092-1 type 11 with a neck for welding to pipes as well as gaskets and screws/nuts for the flange connections. Depending on the configuration of the operating pressure of an installation, the appropriate counter flange must be selected for the operating pressure. Scope of delivery
| |||
Pipe installation, adapter fitting (9) | |||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of flange connections. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
Intermediate flange pieces F 3, DN 50x20mm, PN 10/16 | 110623190 | ||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of flange connections. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
Intermediate flange pieces F 5, DN 50x35mm, PN 6 | 110623293 | ||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of flange connections. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
Intermediate flange pieces F 5, DN 50x35mm, PN 10/16 | 110623396 | ||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of flange connections. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
Intermediate flange pieces F 4, DN 50x30mm, PN 6 | 110681292 | ||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of flange connections. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
Intermediate flange pieces F 4, DN 50x30mm, PN 10/16 | 110681395 | ||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of flange connections. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
Intermediate flange pieces F 40, DN 50x160mm, PN 10/16 | 2101156 | ||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of stainless steel and are provided for length compensation of flange connections also in domestic hot water circulation systems. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
Intermediate flange pieces F 2, DN 50x10mm, PN 6 | 110787690 | ||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of flange connections. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of grey cast iron and are provided for length compensation of flange connections. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| |||
Maintenance/replacement mechanical accessories (1) | |||
Flange cover for sealing the pump hydraulics after removal of the motor head. Scope of delivery
Note Use the 4 screws of the motor head fixation for blind flange installation. | |||
Pump control/interface module (1) | ||||
Connect module Yonos MAXO | ||||
Connect module Yonos MAXO | Wilo-Connect module Yonos MAXO | 2210108 | ||
The Wilo-Connect module Yonos MAXO is a retrofittable plug-in module for Wilo-Yonos MAXO/Yonos MAXO-D/Yonos MAXO-Z pumps. The Wilo-Connect module Yonos MAXO is installed on the electronic module of the pump at the position of the Wilo plug. Utilisation of the Wilo-Connect moduleYonos MAXO dispenses with external contactors and other switchgears as well as the associated installation workload. The load of customer-side switchgears (relays) due to high starting currents is reduced to a minimum by the Connect module Yonos MAXO. Equipment/function
Mains terminals Terminal cross-section: max. 2.5 mm2 Signal terminals Max. switching capacity: 250 V/1 A Terminal cross-section: max. 1.5 mm2 Control terminal Ext. Off Contact rating: 24 V DC, 10 mA Terminal cross-section: min. 0.75 mm2, max. 1.5 mm2 Scope of delivery Wilo-Connect module Yonos MAXO 2 fastening screws for cover installation 4 threaded cable glands M16 Installation and operating instructions | ||||