End of production 2025

DrainLift SANI-S.11M/1

Name: DrainLift SANI-S.11M/1
Brand: Wilo
SKU: 2549900

Lifting unit

Article number: 2549900

Series DrainLift SANI-S

	Sewage lifting unit; Single-pump system	Existing pump



Description
Product description	DrainLift SANI-S.11/M523/1-EF	DrainLift SANI-S.11M/1
Article number	6098869	2549900
Series	DrainLift SANI-S	DrainLift SANI-S
Mains connection	1~230 V ±10%, 50 Hz	1~230 V ±10%, 50 Hz

Data sheet

Hydraulic data
Maximum operating pressure PN	1 bar
Max. permissible pressure in the pressure pipe P	1.5 bar
Min. fluid temperature T_min	3 °C
Max. fluid temperature T_max	40 °C
Min. ambient temperature T_min	3 °C
Max. ambient temperature T_max	40 °C
Max. fluid temperature, for short periods up to 5 min. T	65 °C
Sound-pressure level	70
Gross volume of the tank V	47 l
Switching volume V	25 l
Useable volume at 180 mm inlet height V	25 l
Useable volume at 250 mm inlet height V	32 l
Macerator	no
Free ball passage of the hydraulics	44 mm

Motor data
Mains connection	1~230 V, 50 Hz
Rated current I_N	5.4 A
Protection class	IP68
Phase	1
Rated speed n	2829 1/min
Number of poles	2
Activation type	Direct On Line (DOL)
Max. switching frequency t	60 rph
Power consumption P1(Q=max.) of selected impeller * number of pumps P1	1070 W
Operating mode per pump	S3-10%
Insulation class	F
Motor protection	Bimetall

Cable
Connection cable length L	4 m
Cable type	H07RN-F
Cable cross-section	3G1
Mains plug	CEE 7/7 (Schuko)

Materials
Tank	PE
Pump housing	PP-GF30
Impeller	PP-GF30
Shaft	Stainless steel
Gasket material	NBR
Motor housing	Stainless steel

Installation dimensions
Diagonal dimension Diagonal axis	630 mm
Pipe connection, suction side	DN/OD 40 (HT pipe) DN/OD 50 (HT pipe) DN/OD 63 (HT pipe) DN/OD 75 (HT pipe) DN/OD 90 (HT pipe) DN/OD 110 (HT pipe) DN/OD 160 (HT pipe)
Pipe connection, discharge side	DN 80
Connection venting	DN/OD 50 (HT pipe)
Connection for drainage pipe	DN/OD 50 (HT pipe)

Ordering information

Product data
Brand	Wilo
Product description	DrainLift SANI-S.11M/1
Article number	2549900
EAN number	4062679006543
Colour	green/black
Minimum order quantity	1
Date of sales availability	2020-07-06
Successor model article number	6098869
Successor model designation	DrainLift SANI-S.11/M523/1-EF

Packaging
Packaging type	Cardboard box
Packaging property	Transport packaging
Pieces per pallet	1
Number per layer	1

Dimension, weight
Length with packaging	510 mm
Length L	490 mm
Height with packaging	600 mm
Height H	511 mm
Width with packaging	510 mm
Width W	490 mm
Gross weight, approx. m	35.5 kg
Net weight, approx. m	27 kg

Compact, ready for connection, and fully submersible single-pump lifting unit for pumping sewage containing faeces.

Fluid

For the collection and pumping of these fluids in commercial areas:

Sewage with faeces

Sewage pumping according to 12050

The lifting unit follows DIN EN 12050-1.

Construction

Gas- and watertight collection tank:

Sloped floor at an angle
Inspection opening with transparent cover
Freely selectable inlets in the shown areas
Level measurement with a level sensor 4 ... 20 mA

Sewage pump:

Mounted directly on the collection tank
Surface-cooled (air) motor with thermal motor monitoring
Discharge port with non-return valve including inspection opening attached

Pre-wired "Control MS-L" switchgear for automatic operation:

Collective fault signal with potential-free contact
Integrated and mains-independent alarm
Adjustable follow-up time

Scope of delivery

Lifting unit with switchgear and connection cable with plug
Flange connector from DN 80, PN 10 to DN/OD 110
Flexible collar DN/OD 110 for discharge connection
HT double socket DN/OD 50 for ventilation connection
HT double socket DN/OD 50 for drain connection
Inlet set with hole saw 124 mm (5 in) and seal for HT pipe DN/OD 110
Floor fixation set
Noise insulation mat
9 V rechargeable battery
Installation and operating instructions

Operating data

Approved field of application
Fluid temperature T	3 °C
Max. fluid temperature, for short periods up to 5 min. T	65 °C
Ambient temperature T	3 °C
Maximum operating pressure PN	1 bar
Max. permissible pressure in the pressure pipe P	1.5 bar

Product data
Gross volume of the tank V	47 l
Useable volume at 180 mm inlet height V	25 l
Useable volume at 250 mm inlet height V	32 l
Sound-pressure level	70
Operating mode (non-immersed)	S3-10%
Height H	511 mm
Length L	490 mm
Width W	490 mm
Diagonal dimension Diagonal axis	630 mm
Free ball passage of the hydraulics	44 mm

Motor data
Mains connection	1~230 V, 50 Hz
Voltage tolerance	±10 %
Rated power P₂	0.75 kW
Rated speed n	2829 1/min
Rated current I_N	5.4 A
Insulation class	F
Protection class motor	IP68
Activation type	Direct On Line (DOL)
Max. switching frequency t	60 rph
Motor protection	Bimetall

Cable
Connection cable length L	4 m
Cable type	H07RN-F
Cable cross-section	3G1
Mains plug	CEE 7/7 (Schuko)

Materials
Tank	PE
Pump housing	PP-GF30
Impeller	PP-GF30
Shaft	Stainless steel
Gasket material	NBR
Motor housing	Stainless steel

Installation dimensions
Pipe connection, suction side	DN/OD 40 (HT pipe) DN/OD 50 (HT pipe) DN/OD 63 (HT pipe) DN/OD 75 (HT pipe) DN/OD 90 (HT pipe) DN/OD 110 (HT pipe) DN/OD 160 (HT pipe)
Pipe connection, discharge side	DN 80
Connection venting	DN/OD 50 (HT pipe)

Ordering information
Brand	Wilo
Product description	DrainLift SANI-S.11M/1
Net weight, approx. m	27 kg
Article number	2549900

DrainLift SANI-S.11M/1

Lifting unit

Data sheet

Pump curves

Dimensions and dimensions drawings

DrainLift SANI-S

DrainLift SANI-S – Inlet surfaces

Ordering information

Filtered by

Filtered by