Data sheet
| Product data | |
|---|---|
| Product description | Helix V 1015-1/25/E/KS/400-50 |
| Hydraulic data | |
|---|---|
| Minimum efficiency index (MEI) | ≥ 0.7 |
| Maximum inlet pressure p inl | 10 bar |
| Maximum operating pressure PN | 25 bar |
| Discharge port | DN 40 |
| Min. fluid temperature Tmin | -30 °C |
| Max. fluid temperature Tmax | 120 °C |
| Min. ambient temperature Tmin | -15 °C |
| Max. ambient temperature Tmax | 50 °C |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 5.5 kW |
| Motor efficiency class | IE3 |
| Rated current IN | 10.5 A |
| Rated speed n | 2900 1/min |
| Power factor cos φ100 | 0.86 |
| Activation type | Direct/Star-Delta |
| Motor efficiency 50% ηM 50% | 87.1 % |
| Motor efficiency 75% ηM 75% | 89 % |
| Motor efficiency 100% ηM 100% | 89.2 % |
| Insulation class | F |
| Protection class motor | IP55 |
| Materials | |
|---|---|
| Pump housing | 1.4301 |
| Impeller | 1.4301 |
| Shaft | Stainless steel |
| Mechanical seal | BQ1EGG |
| Gasket material | EPDM |
| Stage chamber material | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection, suction side DNs | DN 40 |
| Pipe connection, discharge side DNd | DN 40 |
Pump curves
Dimensions and dimensions drawings
Helix V 10, PN 25
| Dimensions DN2 | DN 40 |
| wss_dimension_L4 | 130 |
| Dimensions DN1 | 40 |
| Dimensions DN1 | 40 |
| Dimensions L2 | 140 mm |
| Dimensions L1 | 140 |
| Dimensions H | 1298 |
| Dimensions H1 | 149 |
| Dimensions H2 | 962 |
| Dimensions H3 | 710.5 |
| Dimensions H4 | 1002 |
| Dimensions DN1 | DN 40 |
| Pump flange dimensions ØD | 150 mm |
| Dimensions Ød | 86 |
| Pump pipe connection pressure side B1 | 40 mm |
| Pump flange dimensions Ø k | 110 mm |
| Number of drilled holes n | 4 |
| Dimensions dL | 18 mm |
| Motor diameter ØM | 210 mm |
| Motor diameter ØM | 149 mm |
| Motor diameter X | 149 mm |
Wiring diagram
Ordering information
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Helix V 1015-1/25/E/KS/400-50 |
| Article number | 4150563 |
| EAN number | 4048482142364 |
| Colour | green/silver |
| Minimum order quantity | 1 |
| Date of sales availability | 2010-09-01 |
| Packaging | |
|---|---|
| Packaging type | One-way pallet |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 1600 mm |
| Length L | 299 mm |
| Height with packaging | 500 mm |
| Height H | 1298 mm |
| Width with packaging | 400 mm |
| Width W | 252 mm |
| Gross weight, approx. m | 90 kg |
| Net weight, approx. m | 73 kg |
High-pressure multistage centrifugal pump in vertical design with in-line connections.
The non self-priming high-pressure multistage centrifugal pump has a compact overall design. The pump shaft and the motor shaft of the IEC standard motor are connected by means of a clamp coupling.
A separate lantern roller bearing ensures optimum admission of axial thrusts. Intermediate bearings in the hydraulics and corrosion-resistant shaft due to stainless steel sleeve ensure a long service life. Special, permanently attached lifting eyes enable easy pump installation.
The pump is suitable for water supply, water distribution and pressure boosting, industrial recirculation systems, process water and closed cooling circuits. It can also be used in fire extinguishing systems, washing systems as well as for irrigation.
Special features/product advantages
- Laser-welded 2D/3D hydraulics designed for efficient operation and optimised flow and degassing
- Corrosion-resistant impellers, guide vanes and stage housings
- Flow and NPSH-optimised pump housing
- Maintenance-friendly design with particularly robust coupling guard
- Drinking water approval for pumps with parts that come in contact with the fluid made of stainless steel (EPDM version)
Scope of delivery
- Wilo-Helix V high-pressure multistage centrifugal pump
- Installation and operating instructions
- PN16 version with oval flanges: Stainless steel counter flanges with the corresponding screws, nuts and gaskets
Design notes
- Motor protection for 3-phase motor is to be provided on request or onsite
- Single-phase AC motor equipped with built-in thermal motor protection and capacitor
- In its standard position, the terminal box is aligned with the suction flange, but this can be changed if necessary
- The Wilo-Helix V is equipped with a user-friendly mechanical seal in a cartridge design and standard gasket for easy maintenance
- The spacer coupling (from ≥ 7.5 kW) allows the mechanical seal to be replaced without removing the motor
- The flexible lantern design, which is available in two alignments, enables direct access to the mechanical seal
- For pump versions PN16, PN25 and Pmax = 30 bar, round counter flanges in cast iron or stainless steel, screws, nuts and gaskets are available as accessories
- Bypass sets are available as accessories
- The Wilo-Helix V(F) VdS certified version upon request
| Operating data |
|---|
| Product data | |
|---|---|
| Min. fluid temperature Tmin | -30 °C |
| Max. fluid temperature Tmax | 120 °C |
| Min. ambient temperature Tmin | -15 °C |
| Max. ambient temperature Tmax | 50 °C |
| Maximum operating pressure PN | 25 bar |
| Maximum inlet pressure p inl | 10 bar |
| Minimum efficiency index (MEI) | ≥ 0.7 |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 5.5 kW |
| Motor efficiency class | IE3 |
| Rated current IN | 10.5 A |
| Rated speed n | 2900 1/min |
| Power factor cos φ100 | 0.86 |
| Motor efficiency 50% ηM 50% | 87.1 % |
| Motor efficiency 75% ηM 75% | 89 % |
| Motor efficiency 100% ηM 100% | 89.2 % |
| Insulation class | F |
| Protection class | IP55 |
| Materials | |
|---|---|
| Pump housing | Stainless steel |
| Impeller | Stainless steel |
| Shaft | Stainless steel |
| Shaft seal | BQ1EGG |
| Gasket material | EPDM |
| Stage chamber material | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection, suction side DNs | DN 40 |
| Pipe connection, discharge side DNd | DN 40 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Helix V 1015-1/25/E/KS/400-50 |
| Net weight, approx. m | 73 kg |
| Article number | 4150563 |
Filtered by
Document type
Language
Datasheet and documentation
Installation and operating instructions
Wilo-Helix V, .. FIRST V, ..2.0-VE 2-4-6-10-16
| Article Number | 4143727 |
| Issue date | 2023-03 |
| Edition | 12 |
| Language | en |
Wilo-Helix V/ FIRST V 22-36-52
| Article Number | 4120943 |
| Issue date | 1603 |
| Edition | 09 |
| Language | en, mk, uk |
Wilo-Helix V, FIRST V, 2.0-VE 22-36-52
| Article Number | 4120943 |
| Issue date | 02/2022 |
| Edition | 12 |
| Language | en |
Group Statement
Group Statement REACH
| Issue date | 2021-05 |
| References | REACH |
| Certification and inspection body | Self Declaration |
| Issue date | 2026-04-17 |
| Language | language neutral |
UKCA
UKCA 2215674
| References | 2215674 |
| Certification and inspection body | Self Declaration |
| Issue date | 2022-06-08 |
| Language | language neutral |
UKCA 2215680
| References | 2215680 |
| Certification and inspection body | Self Declaration |
| Issue date | 2022-06-14 |
| Language | language neutral |
Installation type
In inlet mode (4) | |||
Counter flange (stainless steel) | |||
Stainless steel counter flange (round, 2 piece), PN 25/PN 40 DN 40 | 4016167 | ||
Counter flange (steel) | |||
Steel counter flange (round, 2 piece), PN 25/PN 40 DN 40 | 4016164 | ||
Stainless steel compensator | |||
Stainless steel compensator DN 40, PN 16 | 2515508 | ||
Baseplate | |||
Base plate | 4157154 | ||
Level control with fault signal (4) | |||
Float switch WAO | |||
Float switch WAO 65, 5 m cable | 503211595 | ||
Float switch WAO 65, 10 m cable | 2006027 | ||
Float switch WAO 65, 20 m cable | 2004429 | ||
Float switch WAO 65, 30 m cable | 2004430 | ||
Level control without fault signal (4) | |||
Float switch WAO | |||
Float switch WAO 65, 5 m cable | 503211595 | ||
Float switch WAO 65, 10 m cable | 2006027 | ||
Float switch WAO 65, 20 m cable | 2004429 | ||
Float switch WAO 65, 30 m cable | 2004430 | ||
Pressure control with fault signal (4) | |||
Wilo-EFC | |||
EFC5.5 3x380-480V 50/60Hz IP55 | 2193437 | ||
Sensor kit | |||
Sensor kit | 2501886 | ||
Pressure switch WVA | |||
Pressure switch WVA up to 6 bar | 180492096 | ||
Pressure switch WVA up to 10 bar | 2502050 | ||
Pressure control without fault signal (2) | |||
Pressure switch WVA | |||
Pressure switch WVA up to 6 bar | 180492096 | ||
Pressure switch WVA up to 10 bar | 2502050 | ||
Mechanical accessories
Bypass line (1) | |||
Bypass line | |||
Bypass line for Helix and Medana CV1-L series | 4230350 | ||
Pipe installation (3) | |||
Stainless steel compensator | |||
Stainless steel compensator DN 40, PN 16 | 2515508 | ||
Counter flange (stainless steel) | |||
Stainless steel counter flange (round, 2 piece), PN 25/PN 40 DN 40 | 4016167 | ||
Counter flange (steel) | |||
Steel counter flange (round, 2 piece), PN 25/PN 40 DN 40 | 4016164 | ||
Wall fixation/installation on a base (1) | |||
Baseplate | |||
Base plate | 4157154 | ||
Electrical accessories
Pump control (1) | |||
Wilo-EFC | |||
EFC5.5 3x380-480V 50/60Hz IP55 | 2193437 | ||
Pump control/accessories (6) | |||
Low-water cut-out switchgear kit for domestic water systems | |||
low-water cut-out switchgear kit WMS G2 | 4204510 | ||
low-water cut-out switchgear kit WMS G2 | 4204512 | ||
Output filter EFC (150-500 m cable length) | |||
17 A sin IP54 Wilo-EFC filter | 6084563 | ||
17 A sin IP00 Wilo-EFC filter | 6084578 | ||
17 A sin IP20 Wilo-EFC filter | 6084904 | ||
Output filter EFC du/dt (up to 150m cable length) | |||
40 A du/dt IP54 Wilo-EFC filter | 6084544 | ||
Pump control/interface module (6) | |||
IF Modules EFC | |||
Profibus DP MCA Wilo-EFC | 2193451 | ||
DeviceNet MCA Wilo-EFC | 2193452 | ||
Profinet MCA Wilo-EFC | 2193453 | ||
Ethernet/IP MCA Wilo-EFC | 2193454 | ||
Modbus TCP MCA Wilo-EFC | 2193455 | ||
BACnet/IP MCA Wilo-EFC | 5114633 | ||
Pressure control (8) | |||
Pressure sensor for systems | |||
Pressure sensor, 0 - 6 bar | 2550660 | ||
Pressure sensor, 0 - 10 bar | 2550661 | ||
Pressure sensor, 0 - 16 bar | 2550662 | ||
Pressure sensor, 0 - 25 bar | 2550663 | ||
Pressure sensor, 0 - 40 bar | 2550664 | ||
Pressure switch WVA | |||
Pressure switch WVA up to 6 bar | 180492096 | ||
Pressure switch WVA up to 10 bar | 2502050 | ||
Sensor kit | |||
Sensor kit | 2501886 | ||
Break tank/accessories (4) | |||
Automatic kit | |||
Automatic kit R ½, 5 m cable | 180493296 | ||
Automatic kit R ½, 20 m cable | 2005645 | ||
Automatic kit R 1, 5 m cable | 180549795 | ||
Automatic kit R 1, 20 m cable | 2007158 | ||
Level control (10) | |||
Float switch WA | |||
Float switch WA65 with 5 m cable | 503211390 | ||
Float switch WA65 with 10 m cable | 503211893 | ||
Float switch WA65 with 20 m cable | 2004431 | ||
Float switch WA65 with 30 m cable | 2004432 | ||
Float switch WA KR1 S with 5 m cable | 6082806 | ||
Float switch WA KR1 S with 10 m cable | 6082807 | ||
Float switch WAO | |||
Float switch WAO 65, 5 m cable | 503211595 | ||
Float switch WAO 65, 10 m cable | 2006027 | ||
Float switch WAO 65, 20 m cable | 2004429 | ||
Float switch WAO 65, 30 m cable | 2004430 | ||
Motor protection (2) | |||
PTC thermistor tripping unit | |||
PTC thermistor tripping unit | 509275993 | ||
Surcharge for thermistor sensor (high-pressure centrifugal pumps) | |||
Surcharge for thermistor sensor (high-pressure centrifugal pumps) | HDK_KLF | ||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Read moreExtended Warranty | |||
Extended Warranty Booster Set 1-2 pumps | 2216416 | ||
Supervision | |||
Supervision Booster Set 1-2 pumps | 2216412 | ||
Installation | |||
Installation Booster Set 1-2 pumps | 2216413 | ||
Commissioning | |||
Commissioning Booster Set 1-2 pumps | 2216414 | ||
Maintenance | |||
Maintenance BASIC Booster Set 1-2 pumps | 2160453 | ||
Maintenance PREMIUM Booster Set 1-2 pumps | 2160483 | ||
Maintenance COMFORT Booster Set 1-2 pumps | 2160468 | ||
System Optimisation | |||
System Optimisation Booster Set 1-2 pump | 2216410 | ||
Energy Solutions | |||
Energy Solutions Booster Set 1-2 pumps | 2216411 | ||
Repairs | |||
Repair Booster Set 1-2 pumps | 2216417 | ||
