Submersible sewage pump | Existing pump | |
 | | |
Description | ||
Product description | Rexa FIT-V06-214A/21M015-523/A | Rexa FIT V06DA-214/EAD0-2-M0015-523-A |
Article number | 6098171 | 6064700 |
Series | Rexa FIT | Rexa FIT |
Mains connection | 1~230 V ±10%, 50 Hz | 1~230 V ±10%, 50 Hz |
Pump connection | DN 65 | DN 65 |
Comment | Check the pipe connection | - |
Operating data | ||
Motor data | ||
Materials | ||
Pipe connection | ||
Dimension, weight | ||
Ordering information |
Data sheet
| Hydraulic data | |
|---|---|
| Maximum operating pressure p | 1.3 bar |
| Discharge port | DN 65/80 |
| Free ball passage of the hydraulics | 65 mm |
| Hydraulics type | Vortex impeller |
| Max. immersion depth | 7 m |
| Max. delivery head Hmax | 11.8 m |
| Max. volume flow Qmax | 45.0 m³/h |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Motor data | |
|---|---|
| Motor Identifier | S 13.M-08/EAD1-2-M 1,5kW 40°C 230V 50Hz |
| Mains connection | 1~230 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 1.5 kW |
| Power consumption P1 max | 2.10 kW |
| Rated current IN | 9.3 A |
| Starting current I | 29 A |
| Operating mode (immersed) | S1 |
| Operating mode (non-immersed) | S2-15 min S3-10% |
| Rated speed n | 2852 1/min |
| Power factor cos φ100 | 0.98 |
| Activation type | Direct On Line (DOL) |
| Number of poles | 2 |
| Max. switching frequency t | 60 rph |
| Insulation class | F |
| Protection class motor | IP68 |
| Cable | |
|---|---|
| Connection cable length L | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 3G1 |
| Type of connection cable | Detachable |
| Equipment/function | |
|---|---|
| Mains plug | CEE 7/7 (Schuko) |
| Float switch | yes |
| Macerator | no |
| Motor protection | Bimetall |
| Motor, leakage detection | no |
| Sealing chamber, leakage detection | optional |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Sealing on pump side | Silicon carbide |
| Sealing on motor side | NBR |
| Gasket material | NBR |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Inlet connection | DN 65 |
| Outlet connection | DN 65/80 |
Pump curves
Dimensions and dimensions drawings
Wilo-Rexa FIT V06-21.. - portable wet well installation
Ordering information
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Rexa FIT V06DA-214/EAD0-2-M0015-523-A |
| Article number | 6064700 |
| EAN number | 4048482227412 |
| Colour | silver/black |
| Minimum order quantity | 1 |
| Date of sales availability | 2012-09-01 |
| Successor model article number | 6098171 |
| Successor model designation | Rexa FIT-V06-214A/21M015-523/A |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 400 mm |
| Length L | 250 mm |
| Height with packaging | 805 mm |
| Height H | 553 mm |
| Width with packaging | 300 mm |
| Width W | 200 mm |
| Gross weight, approx. m | 36 kg |
| Net weight, approx. m | 34 kg |
Submersible pump for stationary and portable wet installation in intermittent operation.
For pumping in commercial areas of:
- Sewage containing faeces
- Wastewater (with small amounts of sand and gravel)
Sewage pumping according to 12050
The pumps meet the requirements of EN 12050-1.
Submersible pump with vortex impeller and horizontal discharge port with flange connection. Hydraulics housing and impeller made of grey cast iron. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with two mechanical seals. Stainless steel motor housing. Detachable connection cable with float switch and fitted plug (CEE7/7). The pump must not be used in hazardous areas.
| Operating data |
|---|
| Product data | |
|---|---|
| Hydraulics type | Vortex impeller |
| Free ball passage of the hydraulics | 65 mm |
| Maximum operating pressure PN | 1 bar |
| Max. immersion depth | 7 m |
| Fluid temperature T | 3 °C |
| Motor data | |
|---|---|
| Motor design | Submersible motor – surface-cooled |
| Mains connection | 1~230 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Power factor cos φ100 | 0.98 |
| Rated power P2 | 1.5 kW |
| Power consumption P1 max | 2.10 kW |
| Rated current IN | 9.3 A |
| Starting current I | 29 A |
| Activation type | Direct On Line (DOL) |
| Number of poles | 2 |
| Rated speed n | 2852 1/min |
| Max. switching frequency t | 60 rph |
| Insulation class | F |
| Protection class | IP68 |
| Operating mode (immersed) | S1 |
| Operating mode (non-immersed) | S2-15 min S3-10% |
| Cable | |
|---|---|
| Connection cable length L | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 3G1 |
| Mains plug | CEE 7/7 (Schuko) |
| Type of connection cable | Detachable |
| Equipment/function | |
|---|---|
| Float switch | yes |
| Macerator | no |
| Motor protection | Bimetall |
| Motor, leakage detection | no |
| Sealing chamber, leakage detection | optional |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Sealing on pump side | QQPGG |
| Sealing on motor side | BXPFF |
| Gasket material | NBR |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection, suction side DNs | DN 65 |
| Pipe connection, discharge side DNd | DN 65/80 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Rexa FIT V06DA-214/EAD0-2-M0015-523-A |
| Net weight, approx. m | 34 kg |
| Article number | 6064700 |