Submersible sewage pump | Existing pump | |
 | | |
Description | ||
Product description | Rexa PRO-C06-345A/21T025X540/O | Rexa PRO C06DA-345/EAD1X2-T0025-540-O |
Article number | 6098481 | 6077702 |
Series | Rexa PRO | Rexa PRO |
Mains connection | 3~400 V ±10%, 50 Hz | 3~400 V ±10%, 50 Hz |
Pump connection | DN 80 | DN 80 |
Comment | Check the pipe connection | - |
Operating data | ||
Motor data | ||
Materials | ||
Pipe connection | ||
Dimension, weight | ||
Ordering information |
Data sheet
| Hydraulic data | |
|---|---|
| Maximum operating pressure p | 2.3 bar |
| Discharge port | DN 65/80 |
| Free ball passage of the hydraulics | 45 mm |
| Hydraulics type | Single-channel impeller |
| Max. immersion depth | 20 m |
| Max. delivery head Hmax | 20.4 m |
| Max. volume flow Qmax | 75.6 m³/h |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Motor data | |
|---|---|
| Motor Identifier | P 13.L-10/EAD1X2-T Ex 2,5kW 40°C 400V 50Hz |
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 2.5 kW |
| Power consumption P1 max | 3.20 kW |
| Rated current IN | 5.5 A |
| Starting current I | 31 A |
| Operating mode (immersed) | S1 |
| Operating mode (non-immersed) | S2-30 min S3-25% |
| Rated speed n | 2848 1/min |
| Power factor cos φ100 | 0.84 |
| Activation type | Direct On Line (DOL) |
| Number of poles | 2 |
| Max. switching frequency t | 60 rph |
| Insulation class | F |
| Protection class motor | IP68 |
| Cable | |
|---|---|
| Connection cable length L | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 7G1,5 |
| Type of connection cable | Detachable |
| Equipment/function | |
|---|---|
| Mains plug | no |
| Float switch | no |
| Macerator | no |
| Motor protection | Bimetall |
| Motor, leakage detection | yes |
| Sealing chamber, leakage detection | optional |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Sealing on pump side | Silicon carbide |
| Sealing on motor side | NBR |
| Gasket material | NBR |
| Motor housing | Grey cast iron |
| Installation dimensions | |
|---|---|
| Inlet connection | DN 80 |
| Outlet connection | DN 65/80 |
Pump curves
Dimensions and dimensions drawings
Wilo-Rexa PRO C06-34.. - portable wet well installation
Ordering information
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Rexa PRO C06DA-345/EAD1X2-T0025-540-O |
| Article number | 6077702 |
| EAN number | 4048482603438 |
| Colour | Green |
| Minimum order quantity | 1 |
| Date of sales availability | 2015-09-01 |
| Successor model article number | 6098481 |
| Successor model designation | Rexa PRO-C06-345A/21T025X540/O |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 400 mm |
| Length L | 230 mm |
| Height with packaging | 805 mm |
| Height H | 608 mm |
| Width with packaging | 300 mm |
| Width W | 267 mm |
| Gross weight, approx. m | 60 kg |
| Net weight, approx. m | 58 kg |
Fully submersible sewage pump for stationary and transportable wet well installation for pumping wastewater and sewage containing faeces (within the scope of validity of (DIN) EN 12050-1). Unit made completely of cast iron. The sealing on the fluid and on the motor side is performed by two bidirectional mechanical seals. Surface-cooled motor in three-phase current version with sealing chamber, thermal motor monitoring and leakage detection for the motor compartment and Ex rating. Detachable connection cable with longitudinally watertight cable inlet and bare cable end.
| Operating data |
|---|
| Product data | |
|---|---|
| Hydraulics type | Single-channel impeller |
| Free ball passage of the hydraulics | 45 mm |
| Maximum operating pressure PN | 2 bar |
| Max. immersion depth | 20 m |
| Fluid temperature T | 3 °C |
| Motor data | |
|---|---|
| Motor design | Submersible motor – surface-cooled |
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Power factor cos φ100 | 0.84 |
| Rated power P2 | 2.5 kW |
| Power consumption P1 max | 3.20 kW |
| Rated current IN | 5.5 A |
| Starting current I | 31 A |
| Activation type | Direct On Line (DOL) |
| Number of poles | 2 |
| Rated speed n | 2848 1/min |
| Max. switching frequency t | 60 rph |
| Insulation class | F |
| Protection class | IP68 |
| Operating mode (immersed) | S1 |
| Operating mode (non-immersed) | S2-30 min S3-25% |
| Cable | |
|---|---|
| Connection cable length L | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 7G1,5 |
| Mains plug | no |
| Type of connection cable | Detachable |
| Equipment/function | |
|---|---|
| Float switch | no |
| Macerator | no |
| Motor protection | Bimetall |
| Motor, leakage detection | yes |
| Sealing chamber, leakage detection | optional |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Sealing on pump side | QQPGG |
| Sealing on motor side | BXPFF |
| Gasket material | NBR |
| Motor housing | Grey cast iron |
| Installation dimensions | |
|---|---|
| Pipe connection, suction side DNs | DN 80 |
| Pipe connection, discharge side DNd | DN 65/80 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Rexa PRO C06DA-345/EAD1X2-T0025-540-O |
| Net weight, approx. m | 58 kg |
| Article number | 6077702 |