Data sheet
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 10 bar |
| Min. fluid temperature Tmin | -20 °C |
| Max. fluid temperature Tmax | 120 °C |
| Min. ambient temperature Tmin | -15 °C |
| Max. ambient temperature Tmax | 40 °C |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Number of poles | 2 |
| Voltage tolerance | ±10 % |
| Motor efficiency class | IE2 |
| Rated power P2 | 0.18 kW |
| Rated current IN | 0.5 A |
| Rated speed n | 2898 1/min |
| Power factor cos φ100 | 0.72 |
| Motor efficiency 50% ηM 50% | 57.9 % |
| Motor efficiency 75% ηM 75% | 63.3 % |
| Motor efficiency 100% ηM 100% | 65.9 % |
| Insulation class | F |
| Protection class motor | IP55 |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | PP-LGF50 |
| Shaft | Stainless steel |
| Mechanical seal | Q1Q1X4GG |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | G 1½ |
| Pipe connection on the discharge side DNd | G 1½ |
| Port-to-port length L0 | 180 mm |
Pump curves
Dimensions and dimensions drawings
VeroLine-IPL 25/85-0,18/2
Wiring diagram
∆: Connection diagram delta connection
Y: Connection diagram star connection
Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases.
| P2≤ 3 kW | 3~400 V Y |
| 3~230 V ∆ | |
| P2≥ 4 kW | 3~690 V Y |
| 3~400 V ∆ |
After removing the bridges, Y-∆ start is possible.
Acoustics
Airborne sound data sheet
| Airborne sound power LW,A | |
|---|---|
| Octave band centre frequency in Hz | Level in dB(A), ref. 20µPa |
| L63 | 30.5 |
| L125 | 28.5 |
| L250 | 42.6 |
| L500 | 47.4 |
| L1000 | 57.3 |
| L2000 | 58.8 |
| L4000 | 54.8 |
| L8000 | 44.2 |
| Airborne sound-power level (total) Lw | 62 |
| Airborne sound pressure Lp,A,1m | |
|---|---|
| Octave band centre frequency in Hz | Level in dB(A), ref. 1pW |
| L63 | 16 |
| L125 | 14 |
| L250 | 28.1 |
| L500 | 32.9 |
| L1000 | 42.8 |
| L2000 | 44.3 |
| L4000 | 40.3 |
| L8000 | 29.7 |
| Airborne sound-pressure level (total) Lp | 48 |
The acoustic values given are based on measurements and in some cases on calculations and may deviate by up to 3 dB.
Ordering information
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | VeroLine-IPL 25/85-0,18/2-S1 |
| Article number | 2107015 |
| EAN number | 4048482098326 |
| Colour | Green |
| Minimum order quantity | 1 |
| Date of sales availability | 2015-09-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 8 |
| Dimension, weight | |
|---|---|
| Length with packaging | 400 mm |
| Length L | 330 mm |
| Height with packaging | 263 mm |
| Height H | 180 mm |
| Width with packaging | 300 mm |
| Width W | 137 mm |
| Gross weight, approx. m | 11 kg |
| Net weight, approx. m | 9 kg |
Single-stage glanded centrifugal pump with compact in-line design with directly flanged three-phase current motor and one-piece shaft or with lantern and standard motor rigidly connected by coupling (N version). The IPL series is suitable for pipe installation or installation on a base. Mounting brackets are available as accessories. With force-flushed circulation, bidirectional bellows mechanical seal and cavitation-reducing plastic impeller.
Flanges with pressure measuring connections R 1/8. The pump housing and lantern are cataphoretic-coated.
The motor terminal box can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant.
| Operating data | |
|---|---|
| Min. fluid temperature Tmin | -20 °C |
| Max. fluid temperature Tmax | 120 °C |
| Min. ambient temperature Tmin | -15 °C |
| Max. ambient temperature Tmax | 40 °C |
| Maximum operating pressure PN | 10 bar |
| Motor data | |
|---|---|
| Motor efficiency class | IE2 |
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 180 W |
| Rated speed n | 2898 1/min |
| Rated current IN | 0.5 A |
| Power factor cos φ100 | 0.72 |
| Motor efficiency 50% ηM 50% | 57.9 % |
| Motor efficiency 75% ηM 75% | 63.3 % |
| Motor efficiency 100% ηM 100% | 65.9 % |
| Insulation class | F |
| Protection class | IP55 |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | PP-LGF50 |
| Shaft | Stainless steel |
| Shaft seal | Q1Q1X4GG |
| Lantern | Grey cast iron |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | G 1½ |
| Pipe connection on the discharge side DNd | G 1½ |
| Port-to-port length L0 | 180 mm |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | VeroLine-IPL 25/85-0,18/2-S1 |
| Net weight, approx. m | 9 kg |
| Article number | 2107015 |
Filtered by
Datasheet and documentation
Electrical accessories
Pump control (19) | |||
Wilo-EFC | |||
EFC0.37 3x380-480V 50/60Hz IP55 | 2193429 | ||
Auto Control Inverters | |||
1.1 Kw Inverter | 2815036 | ||
18.5 Kw Inverter | 2816036 | ||
30 Kw Inverter | 2816039 | ||
7.5 Kw Inverter | 2816047 | ||
3 Kw Inverter | 2816055 | ||
1.5 Kw Inverter | 2816056 | ||
2.2 Kw Inverter | 2816057 | ||
4 Kw Inverter | 2816058 | ||
5.5 Kw Inverter | 2816059 | ||
11 Kw Inverter | 2816060 | ||
15 Kw Inverter | 2816061 | ||
22 Kw Inverter | 2816062 | ||
37 Kw Inverter | 2816063 | ||
45 Kw Inverter | 2816064 | ||
55 Kw Inverter | 2816065 | ||
75 Kw Inverter | 2816066 | ||
90 Kw Inverter | 2816067 | ||
110 Kw Inverter | 2816068 | ||
Pump control/accessories (25) | |||
Communication module CC | |||
CC communication module | 2533850 | ||
Connection cable control modules/signalling modules | |||
Control modules connecting cable | 2533790 | ||
Signalling modules connecting cable | 2533890 | ||
BMS base module | |||
BMS base module | 2533800 | ||
Antenna GSM/GPRS | |||
D-network dual-band antenna with 3 m cable | 2533862 | ||
D-network tri-band antenna 10 m cable | 2533863 | ||
D-network tri-band antenna 15 m cable | 2533864 | ||
SMA/FME adapter | 2545548 | ||
Pump signalling module | |||
Signalling module pump 1-2 | 2533812 | ||
Signalling module pump 3-6 | 2533836 | ||
Outdoor temperature sensor Pt 100 | |||
Outdoor temperature sensor Pt 100 | 2533772 | ||
Signal converter retrofit kit | |||
Signal converter 0-10 V / 0-20 mA | 2534992 | ||
DDG impulse selector | |||
DDG impulse selector | 2533770 | ||
Temperature module | |||
Temperature module for systems with 4-6 pumps | 2533771 | ||
Temperature module for systems with 1-3 pumps | 2534991 | ||
Communication module ModBus | |||
Communication module Modbus RTU | 2533869 | ||
Communication module Profibus | |||
Profinet communication module | 4255989 | ||
SC communication module BACnet | |||
SC-communication module BACnet MS/TP (slave) | 2538242 | ||
BACnet IP SC communication module | 2553366 | ||
Communication module LON (SC) | |||
Communication module LON (SC) | 2538243 | ||
Communication module GSM (SC) | |||
Communication module GSM (SC) | 2542216 | ||
SC-HVAC signal board | |||
SC-HVAC signal board | 2119646 | ||
Output filter EFC (150-500 m cable length) | |||
2.4 A sin IP54 Wilo-EFC filter | 6084559 | ||
2.5 A sin IP00 Wilo-EFC filter | 6084574 | ||
2.5 A sin IP20 Wilo-EFC filter | 6084900 | ||
Pump control/interface module (5) | |||
IF Modules EFC | |||
Profibus DP MCA Wilo-EFC | 2193451 | ||
DeviceNet MCA Wilo-EFC | 2193452 | ||
Profinet MCA Wilo-EFC | 2193453 | ||
Ethernet/IP MCA Wilo-EFC | 2193454 | ||
Modbus TCP MCA Wilo-EFC | 2193455 | ||
Differential pressure detection (5) | |||
DDG (4-20mA) | |||
Wilo-DDG 10 Signal Trans.(4-20mA)2G VP. | 2136454 | ||
Wilo-DDG 20 Signal Trans.(4-20mA)2G VP. | 2136456 | ||
Wilo-DDG 40 Signal Trans.(4-20mA)2G VP. | 2136458 | ||
Wilo-DDG 60 Signal Trans.(4-20mA)2G VP. | 2136460 | ||
Wilo-DDG 100 Signal Trans.(4-20mA) | 2211740 | ||
Motor protection (2) | |||
PTC thermistor tripping unit | |||
PTC thermistor tripping unit | 509275993 | ||
Surcharge for thermistor sensor (single pumps) | |||
Surcharge for thermistor sensor <7.5 kW | KLF_7_EP | ||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Read moreExtended Warranty | |||
Extended Warranty Glanded pumps | 2219590 | ||
Supervision | |||
Supervision Glanded pumps | 2219321 | ||
Installation | |||
Installation Glanded pumps | 2219356 | ||
Commissioning | |||
Commissioning Glanded pumps | 2219391 | ||
Maintenance | |||
Maintenance COMFORT Glanded pumps | 2219493 | ||
Maintenance PREMIUM Glanded pumps | 2219546 | ||
Maintenance BASIC Glanded pumps | 2219531 | ||
System Optimisation | |||
System Optimisation Glanded pumps | 2219251 | ||
Energy Solutions | |||
Energy Solutions Glanded pumps | 2219240 | ||
Repairs | |||
Repair Glanded pumps | 2219610 | ||
