Wilo-TOP-S
Product description | Pump connection | Port-to-port length L0 | Maximum operating pressure PN | Mains connection | Gross weight, approx. m | Pieces per pallet | Article number |
---|---|---|---|---|---|---|---|
TOP-S 80/15 (3~400 V, PN 6) | DN 80 | 360 mm | 6 bar | 3~400 V, 50 Hz | 45.7 kg | 8 | 2080067 |
TOP-S 80/15 (3~400 V, PN 10) | DN 80 | 360 mm | 10 bar | 3~400 V, 50 Hz | 45.7 kg | 8 | 2080068 |
TOP-S 100/10 (3~400/230 V, PN 6) | DN 100 | 360 mm | 6 bar | 3~400 V, 50 Hz | 36.9 kg | 12 | 2046618 |
TOP-S 100/10 (3~400/230 V, PN 6) | DN 100 | 360 mm | 6 bar | 3~400 V, 50 Hz | 36.9 kg | 12 | 2080071 |
TOP-S 100/10 (3~400/230 V, PN 10) | G 2 | 360 mm | 10 bar | 3~400 V, 50 Hz | 36.9 kg | 12 | 2046619 |
TOP-S 100/10 (3~400/230 V, PN 10) | G 2 | 360 mm | 10 bar | 3~400 V, 50 Hz | 36.9 kg | 12 | 2080072 |
Wilo-TOP-S
Design
Glandless circulator with screwed connection or flange connection.
Application
Hot-water heating systems of all kinds, industrial circulation systems, air-conditioning systems and closed cooling circuits
Equipment/function
Operating modes
- Speed-stage switching
Manual functions
- Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 ≥ 350 W)
Automatic functions
- Internal protection against non-approved high winding temperatures (only for pumps for which P2 ≤180 W)
Signal and display functions
- Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 ≥180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
- Direction of rotation control light (only for 3~pumps )
- Display of selected speed stage
Dual pump management (double pump or 2 x single pumps)
- Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)
Equipment
- For flange-end pumps: Flange versions
- Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
- Standard version for DN 80/DN 100 pumps: PN 6 flange (designed for PN 16 according to EN 1092-2) for PN 6 counter flange
- Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2≥180 W)
- Thermal insulation as standard for heating applications
Typekey
Example: | TOP‐S 40/10 |
TOP-S | Standard pump (screw-end pump or flange-end pump) |
40/ | Nominal connection diameter |
Technical data
- Permitted temperature range -20 °C to +130 °C, for short periods (2 h) to +140 °C (TOP-S 25/13, 80/15, 80/20: -20 °C to +110 °C)
- Mains connection:
- 1~230 V, 50 Hz (depending on type)
- 3~230 V, 50 Hz (with optional switching plug)
- 3~400 V, 50 Hz
- Protection class IP X4D
- Screwed connection or flange connection (depending on type) Rp 1 to DN 100
- Max. operating pressure of standard version: 6/10 bar or 6 bar (special version: 10 bar)
Materials
- Pump housing: Grey cast iron
- Impeller: Plastic
- Shaft: stainless steel
- Bearing: Carbon, metal impregnated
Scope of delivery
- Pump
- Thermal insulation
- Seals for threaded connection
- Washers for flange screws (for nominal connection diameters DN 40 - DN 65)
- Installation and operating instructions
Options
- Version for special voltages on request.
Accessories
- Screwed connections for threaded connection
- Counter flanges for flange connection
- Adapter fittings
- Wilo-SK 602N/SK 622N tripping unit for full motor protection
- For pumps 3~400 V:
- Switching plug 3~230 V, 50 Hz (not TOP-S 80/15, TOP-S 80/20)
Installation and operating instructions
Certification booklet
Pompa që do të shkëmbehet nuk ndodhet në bazën e të dhënave
Dëshëroni të shkëmbeni një pompë, por ajo nuk ndodhet (ende) në bazën e të dhënave. Pavarsisht nga madhësia e bazës së të dhënave, ka mundësi që pompa juaj nuk gjendet. Ne do jemi të lumtur të gjejmë se cila pompë përshtatet per ju dhe ta shtojmë atë tek baza jonë e të dhënave.
Hiqni dorë tani nga pompa që mungon!