Wilo-Initial Waste | Wilo

Wilo-Initial Waste

Wilo-Initial Waste

Veçoritë/avantazhet e produktit

Operationally reliable due to self-switched motor protection
Easy operation due to fitted float switch

Shërbimet e rekomanduara

Konstruksioni

Submersible pump for fully automatic operation in portable wet well installation.

Lëngje

For the pumping in domestic areas of:

Sewage not containing faeces
Wastewater (with small amounts of sand and gravel)

Tërësia e pajisjeve/funksionimi

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Çelësi tip

Example	Wilo-Initial WASTE 14-9/522/AEF-10M
Initial	Series
WASTE	Sewage pump
14	Nominal flow in m³/h
9	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10M	Cable length

Të dhënat teknike

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Materiale

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Konstruksioni

Sewage pump with vortex impeller and vertical threaded connection. Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Dorëzim

Pump
Fitted elbow with a threaded connection R 1½
Installation and operating instructions

Manuali i instalimit dhe mënyrës së punës